|
|
KP-1608P1CのメーカーはKingbright Corporationです、この部品の機能は「PHOTOTRANSISTOR」です。 |
部品番号 | KP-1608P1C |
| |
部品説明 | PHOTOTRANSISTOR | ||
メーカ | Kingbright Corporation | ||
ロゴ | |||
このページの下部にプレビューとKP-1608P1Cダウンロード(pdfファイル)リンクがあります。 Total 4 pages
1.6X0.8mm PHOTOTRANSISTOR
Part Number: KP-1608P1C
Features
z 1.6mmX0.8mm SMT LED, 1.1mm thickness.
z Mechanically and spectrally matched to infrared emitting
LED lamp.
z Water clear lens.
z Package: 2000pcs / reel.
z Moisture sensitivity level : level 3.
z RoHS compliant.
Description
Made with silicon phototransistor chips.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2.Tolerance is ±0.1(0.004") unless otherwise noted
3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAD0327
APPROVED: WYNEC
REV NO: V.9
CHECKED: Allen Liu
DATE: APR/21/2010
DRAWN: F.F.ZHou
PAGE: 1 OF 4
ERP: 1203000037
1 Page KP-1608P1C
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Specifications
(Units : mm)
SPEC NO: DSAD0327
APPROVED: WYNEC
REV NO: V.9
CHECKED: Allen Liu
DATE: APR/21/2010
DRAWN: F.F.ZHou
PAGE: 3 OF 4
ERP: 1203000037
3Pages | |||
ページ | 合計 : 4 ページ | ||
|
PDF ダウンロード | [ KP-1608P1C データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
KP-1608P1C | PHOTOTRANSISTOR | Kingbright Corporation |