|
|
FX101のメーカーはETCです、この部品の機能は「Frequency Translator」です。 |
部品番号 | FX101 |
| |
部品説明 | Frequency Translator | ||
メーカ | ETC | ||
ロゴ | |||
このページの下部にプレビューとFX101ダウンロード(pdfファイル)リンクがあります。 Total 12 pages
Product Data Sheet
FX-101
Frequency Translator
Features
• Output frequencies up to 77.760 MHz
• Jitter Generation OC-192 compliant
• Jitter transfer per GR-253-CORE
• Single 5.0 or 3.3 Vdc supply
• Locked to specified Input frequency, e.g. 8 kHz
• 1" X 0.8" X 0.2", Surface Mount (FR4base)
• Optional CMOS or PECL Output
Applications
• SONET / SDH / ATM
• DWDM / FDM
• DSL-PON Interconnects
• FEC (Forward Error Correction)
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 •Web: www.vectron.com
1 Page Outline Drawing
FX-101 Frequency Translator
Pin Out
Pin Symbol
1 CLKIN
2 GND
3 LD
(output)
4 Monitor
(Output)
5 ---
6 NC
7 GND
8 Tri-state
&
Enable
Disable
9 Out
10 COut
11 NC
12 Select A
13 Select B
14 NC
15 GND
16 Vcc
Function
Input Frequency - The FX-101 series AC couples the input, this means the unit is capable of
handling HCMOS, LvHCMOS, PECL and LvPECL input signals.
(For Input Frequencies below 1 MHz only HCMOS and LvHCMOS are supported.)
Ground
Lock Detect
Logic “1” indicates a locked condition
Logic “0” indicates that no input signal is present or the input signal has moved out of the
lock range.
PLL/ VCXO control voltage
Under locked conditions, should be >0.3V and <3.0V for the 3.3 volt option or >0.5V and
<4.5V for the 5 volt option. Input frequency may be out of range if voltage exceeds these limits.
Missing
No Connection
Ground
HCMOS
Logic "1" (or no connect) = Output enabled
Logic "0"
= Output in high impedance
PECL
Logic "1"
= Output disabled
Logic "0" (or no connect) = Output enabled
Output (PECL) or HCMOS
Complementary Output (PECL) or GND for HCMOS output option
No Connection
Do not Exceed Vcc
Do not Exceed Vcc
No Connection
Ground
Power Supply Voltage (5 Vdc or 3.3Vdc)
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Web: www.vectron.com
3Pages FX-101 Frequency Translator
Typical Application
All components outside the dotted line box are user supplied components. This is just one possbile
configuration of the FX-101. For additional information about your specific needs, please contact our factory.
Output Load Configuration
*Note: VI highly recommends either a
linear regulator or bypass capacitors;
10 uF, 0.1 uF and a 100pF capacitor
would be typical.
All components outside the dotted line box are user supplied components
and/or connections. This is just one possible configuration of the FX-101.
For additional information about your specific needs please contact our Factory.
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 •Web:www.vectron.com
6 Page | |||
ページ | 合計 : 12 ページ | ||
|
PDF ダウンロード | [ FX101 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
FX101 | Frequency Translator | ETC |
FX102K | (FX102K / FX103K) SMALL PHYSICAL SIZE | CML Microcircuits |
FX103 | QTC Address Decoder | CML Microcircuits |
FX103K | (FX102K / FX103K) SMALL PHYSICAL SIZE | CML Microcircuits |