DataSheet.jp

FX1-216P-1.27DSAL の電気的特性と機能

FX1-216P-1.27DSALのメーカーはHirose Electricです、この部品の機能は「1.27mm Pitch Connector」です。


製品の詳細 ( Datasheet PDF )

部品番号 FX1-216P-1.27DSAL
部品説明 1.27mm Pitch Connector
メーカ Hirose Electric
ロゴ Hirose Electric ロゴ 




このページの下部にプレビューとFX1-216P-1.27DSALダウンロード(pdfファイル)リンクがあります。

Total 8 pages

No Preview Available !

FX1-216P-1.27DSAL Datasheet, FX1-216P-1.27DSAL PDF,ピン配置, 機能
1.27mm Pitch Connector
FX1 Series
DIN duplex density mount has been achieved.
(DIN 96 contacts and FX1 192 (96x2)
sFeatures
1. High density and space saved-DIN Duplex Mount Achieved
The alignment of the mating area in 4-row allows to duplex the
number of contacts in the nearly equivalent mount square as for
the conventional DIN connector.(Refer to photo (1).)
2. High Current and High Voltage
Two-thirds of total contact numbers are used for half pitch
signaling contact, while the other one-third thereof is used for the
power ground contact. Power ground contact corresponds to
high current (1A) and high voltage (250V).
3. Sequence Structure
Considering insertion/extraction in active power mode and
maintenance on the end user side, the FX series is designed in a
mechanism that can afford the time different contact at three
steps. (For details, refer to Figure (2) as shown on the right.)
FX1V (3 step sequence)
Mating
Power
Supply
Removal
Ground
Signal
4. Mis-insertion Prevent
Provide the insertion guide on both ends of connector, and widen
an inductive area in order to prevent mis-insertion.
Sequence Structure
(Pin contact sequence)
Photo 1
Figure 2
*FX1 Series (2 step sequence)
1 Row B
2 Row A, row C
*FX1 Series (3 step sequence)
1 B1 to B4, B45 to B52, B93 to B96
2 B5 to B44, B53 to B92
3 Row A, row C
Setting row B to ground, if active cable insertion and
extraction are performed as power supply, arc will
occur between contact and contact. The row B
contact structure is constructed to separate arc
occurrence point a and normal contact point b, and
minimizes affects on the contact.
A134

1 Page





FX1-216P-1.27DSAL pdf, ピン配列
sOrdering Information
qFX1 Series
FX1 - 192 P - 1.27 DSA L
q
we
r ty
q Series Name : FX1
w Number of contacts: 192, 216
e Connector type : P-header
: S-receptacle
r Contact pitch: 1.27mm
t Contact type: DS : Right angle
DSA : Straight
y L: Board prefixed pin
Note: The cleaning type only is applied on the header side to FX1 series.
qFX1V Series
FX1V A - 192 P - DSA L
q w er
ty
q Series Name : FX1V
w A: Cleaning type (header side only)
Blank: No cleaning type
e Number of contacts : 288
r Connector type: P-header
S-receptacle
t Contact type: DS : Right angle
DSA : Straight
y L: Board prefixed pin
Note 1. Cleaning type: the liquid escape hole is added at dip cleaning.
No cleaning type: no liquid escape hole is added at dip cleaning.
Note 2. The FX1V series omits the contact pitch.
BApplication Pattern
A136


3Pages


FX1-216P-1.27DSAL 電子部品, 半導体
sHeader : Right Angle Type
BPCB mounting pattern Applicable board thickness t=1.6mm
Part Number
FX1-144P-1.27DS
FX1-144P-1.27DSL
CL No.
571-0203-6
571-0253-4
Number of Contacts
144
A139

6 Page



ページ 合計 : 8 ページ
 
PDF
ダウンロード
[ FX1-216P-1.27DSAL データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
FX1-216P-1.27DSA

1.27mm Pitch Connector

Hirose Electric
Hirose Electric
FX1-216P-1.27DSAL

1.27mm Pitch Connector

Hirose Electric
Hirose Electric


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap