FX1-144S-1.27DS Datasheet PDF - Hirose Electric
| Part Number | FX1-144S-1.27DS | |
| Description | 1.27mm Pitch Connector | |
| Manufacturers | Hirose Electric | |
| Logo |  |
|
|
There is a preview and FX1-144S-1.27DS download ( pdf file ) link at the bottom of this page. Total 8 Pages | ||
Preview 1 page No Preview Available !
1.27mm Pitch Connector
FX1 Series
DIN duplex density mount has been achieved.
(DIN 96 contacts and FX1 192 (96x2)
sFeatures
1. High density and space saved-DIN Duplex Mount Achieved
The alignment of the mating area in 4-row allows to duplex the
number of contacts in the nearly equivalent mount square as for
the conventional DIN connector.(Refer to photo (1).)
2. High Current and High Voltage
Two-thirds of total contact numbers are used for half pitch
signaling contact, while the other one-third thereof is used for the
power ground contact. Power ground contact corresponds to
high current (1A) and high voltage (250V).
3. Sequence Structure
Considering insertion/extraction in active power mode and
maintenance on the end user side, the FX series is designed in a
mechanism that can afford the time different contact at three
steps. (For details, refer to Figure (2) as shown on the right.)
FX1V (3 step sequence)
Mating
Power
Supply
Removal
Ground
Signal
4. Mis-insertion Prevent
Provide the insertion guide on both ends of connector, and widen
an inductive area in order to prevent mis-insertion.
Sequence Structure
(Pin contact sequence)
Photo 1
Figure 2
*FX1 Series (2 step sequence)
1 Row B
2 Row A, row C
*FX1 Series (3 step sequence)
1 B1 to B4, B45 to B52, B93 to B96
2 B5 to B44, B53 to B92
3 Row A, row C
Setting row B to ground, if active cable insertion and
extraction are performed as power supply, arc will
occur between contact and contact. The row B
contact structure is constructed to separate arc
occurrence point a and normal contact point b, and
minimizes affects on the contact.
A134
|
| |
 
sHeader : Straight Type
BPCB mounting pattern Applicable board thickness t=1.6mm
Part Number
FX1-144P-1.27DSA
FX1-144P-1.27DSAL
FX1-192P-1.27DSA
FX1-192P-1.27DSAL
FX1-216P-1.27DSA
FX1-216P-1.27DSAL
CL No.
571-0303-0
571-0353-9
571-0304-3
571-0354-1
571-0305-6
571-0355-4
Number of Contacts A
144 73.29
192 93.61
216 103.77
B
59.69
80.01
90.17
Unit: mm
D
____
69.85
____
90.17
____
100.33
A138
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for FX1-144S-1.27DS electronic component. |
| Information | Total 8 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ FX1-144S-1.27DS.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| FX1-144S-1.27DS | The function is 1.27mm Pitch Connector. Hirose Electric | |
| FX1-144S-1.27DSL | The function is 1.27mm Pitch Connector. Hirose Electric | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
FX1-
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||