DataSheet.jp

P6KE12CA の電気的特性と機能

P6KE12CAのメーカーはLittelfuseです、この部品の機能は「TVS Diodes」です。


製品の詳細 ( Datasheet PDF )

部品番号 P6KE12CA
部品説明 TVS Diodes
メーカ Littelfuse
ロゴ Littelfuse ロゴ 




このページの下部にプレビューとP6KE12CAダウンロード(pdfファイル)リンクがあります。

Total 6 pages

No Preview Available !

P6KE12CA Datasheet, P6KE12CA PDF,ピン配置, 機能
P6KE Series
TVS Diodes
Axial Leaded – 600W > P6KE series
RoHS
Pb e3
Bi-directional
Description
The P6KE Series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Uni-directional
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E128662/E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Peak Pulse Power Dissipation by
10/1000μs Test Waveform (Fig.2)
(Note 1)
Steady State Power Dissipation on
Inifinite Heat Sink at TL=75ºC (Fig. 6)
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
Only (Note 2)
Maximum Instantaneous Forward
Voltage at 50A for Unidirectional
Only (Note 3)
Operating Junction and Storage
Temperature Range
Typical Thermal Resistance Junction
to Lead
Typical Thermal Resistance Junction
to Ambient
Symbol
PPPM
PD
IFSM
VF
TJ, TSTG
RuJL
RuJA
Value
600
5.0
100
3.5/5.0
-55 to 175
20
75
Unit
W
W
A
V
°C
°C/W
°C/W
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
3. VF<3.5V for devices of VBR <_ 200V and VF< 5.0V for devices of VBR >_ 201V.
Features
VBR @TJ= VBR@25°C x (1+αT
x (TJ - 25))
(αT:Temperature Coefficient)
• EFT protection of data
lines in accordance with
IEC 61000-4-4 (IEC801-4)
• Glass passivated chip
• Low incremental surge
junction in DO-15 Package resistance
• 600W peak pulse
capability at 10/1000μs
aTybpoivceal1I3RVless than 1μA
waveform, repetition rate • High temperature
(duty cycles):0.01%
soldering guaranteed:
• Fast response time:
typically less than 1.0ps
from 0 Volts to BV min
• Excellent clamping
capability
• T ypical failure mode is
short from over-specified
voltage or current
• W hisker test is conducted
based on JEDEC
260°C/40 seconds /
0.375”,(9.5mm) lead
length, 5 lbs., (2.3kg)
tension
• Plastic package has
underwriters laboratory
flammability classification
94V-O
• Matte tin lead–free plated
• Halogen free and RoHS
JESD201A per its table 4a compliant
and 4c
• 2nd level interconnect is
• IEC-61000-4-2 ESD
Pb-free per IPC/JEDEC
15kV(Air), 8kV (Contact)
J-STD-609A.01
• ESD protection of data
lines in accordance with
IEC 61000-4-2 (IEC801-2)
Applications
TVS devices are ideal for the protection of I/O interfaces,
cVoCCmbpuustearn, dinodtuhsetrriavlualnnedracbolnescuimrcueirtseluescetrdoninictealpepcloicmat,ions.
Functional Diagram
Cathode
P6KE Series
Bi-directional
Uni-directional
Anode
112
©2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 10/09/14

1 Page





P6KE12CA pdf, ピン配列
TVS Diodes
Axial Leaded – 600W > P6KE series
I-V Curve Characteristics
Uni-directional
Bi-directional
Ipp
Vc VBR VR
IR VF
IT
V
Vc VBR VR
IT
IR
IR
IT
VR VBR Vc
V
Ipp
Ipp
PPPM Peak Pulse Power Dissipation -- Max power dissipation
VR Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation
VBR Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT)
VC Clamping Voltage -- Peak voltage measured across the suppressor at a specified Ippm (peak impulse current)
IR Reverse Leakage Current -- Current measured at VR
VF Forward Voltage Drop for Uni-directional
Ratings and Characteristic Curves (TA=25°C unless otherwise noted)
Figure 1 - TVS Transients Clamping Waveform
Figure 2 - Peak Pulse Power Rating
Voltage Transients
100
Voltage Across TVS
Current Through TVS
10
1
Time
0.1
0.001
0.01 0.1
1
td-Pulse Width (ms)
10
continues on next page.
P6KE Series
114 ©2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 10/09/14


3Pages


P6KE12CA 電子部品, 半導体
TVS Diodes
Axial Leaded – 600W > P6KE series
Part Numbering System
P6KE xxx XX X
OPTION CODE:
BLANK Reel Tape
-B Bulk Packaging
TYPE CODE:
A
CA
BUin-Di-Direircetciotinoanla(l5(%5%VBVRBVRoVlotaltgaegeToTloelrearnacnec)e)
(VRBeR VfeOr LtoTAthGeEECleOcDtriEcal Characteristics table)
SERIES CODE
Part Marking System
Cathode Band
(for Uni-directional
products only)
Littelfuse Logo
YYWW
P6KEXXX
Trace Code Marking
YY:Year Code
WW: Week Code
Product Type
Packaging
Part Number
P6KExxxXX
Component
Package
DO-204AC
Quantity
4000
Packaging
Option
Packaging Specification
Tape & Reel EIA STD RS-296
P6KExxxXX-B DO-204AC
1000
BULK
Littelfuse Spec.
Tape and Reel Specification
2.56
(65.0)
0.197+/-0.020
(5.0+/- 0.5)
13.0
(330.2)
3.0
(76.2)
2.75
(69.85)
0.68
(17.27)
Off Center
either side
0.028(0.7)
2.063+0.079/-0.039
(53.0+2.0/-1.0)
0.047
(1.2)
0.236
(6.0)
Dimensions are in
inches/mm
Recess Depth Max. 0.75 (19.05)
Direction of Feed
P6KE Series
117 ©2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 10/09/14

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ P6KE12CA データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
P6KE12C

600W TRANSIENT VOLTAGE SUPPRESSORS

Won-Top Electronics
Won-Top Electronics
P6KE12C

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 6.8 TO 440 Volts 600Watt Peak Power 5.0 Watt Steady State)

Pan Jit International Inc.
Pan Jit International Inc.
P6KE12C

TVS Diode ( Transient Voltage Suppression )

Surge Components
Surge Components
P6KE12C

Diode, Rectifier (Transient Voltage Suppressor)

TRSYS
TRSYS


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap