|
|
PDF AG603 Data sheet ( Hoja de datos )
| Número de pieza | AG603 | |
| Descripción | InGaP HBT Gain Block | |
| Fabricantes | WJ Communications | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AG603 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
AG603
InGaP HBT Gain Block
The Communications Edge TM
Preliminary Product Information
Product Features
Product Description
Functional Diagram
• DC - 2700MHz
• +18.5 dBm P1dB at 900MHz
• +33.5 dBm OIP3 at 900MHz
• 17.6 dB Gain at 900MHz
• Single Voltage Supply
• SOT-89 SMT Package
• Internally matched to 50 Ω
The AG603 is a general-purpose buffer amplifier that offers high
dynamic range in a low-cost surface-mount package. At 900 MHz,
the AG603 typically provides 17.6 dB of gain, +33.5 dBm Output
IP3, and +18.5 dBm P1dB. The device combines dependable
performance with consistent quality to maintain MTBF values
exceeding 100 years at mounting temperatures of +85°C and is
housed in a SOT-89 industry standard SMT package.
The AG603 consists of Darlington pair amplifiers using the high
reliability InGaP/GaAs HBT technology process technology and
only requires DC-blocking capacitors, a bias resistor, and an
inductive RF choke for operation.
The broadband MMIC amplifier can be directly applied to various
current and next generation wireless technologies such as GPRS,
GSM, CDMA, W-CDMA, and UMTS. In addition, the AG603
will work for other various applications within the DC to 2.7 GHz
frequency range such as CATV and fixed wireless.
GND
AG603
RF IN
GND RF OUT
AG603-89
Specifications
Parameters1
Units Min Typ Max
Frequency Range
MHz
DC-2700
S21 - Gain
dB 17.6
S11 - Input Return Loss
dB
-15
S22 - Output Return Loss
dB
-12
Output P1dB
dBm +18.5
Output IP3
dBm +33.5
Noise Figure
dB 4.5
Device Voltage
V 4.9
Device Current
mA 75
Test conditions unless otherwise noted
1. T = 25ºC, Supply Voltage = +6 V, Rbias = 10 Ω, Frequency = 900MHz, 50 Ω System.
2. 3OIP measured with two tones at an output power of 0 dBm/tone separated by 10MHz. The
suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
Absolute Maximum Ratings
Parameters
Rating
Operating Case Temperature
-40 to +85 °C
Storage Temperature
-40 to +125 °C
Operation of this device above any of there parameters may cause permanent damage
Application Circuit
VS = +6 V
IS = 75 mA
R1
10 Ω
C3
Bypass Capacitor
Typical Parameters
Parameter1
Units
Typical
Frequency
MHz
900
S21 dB 17.6
S11 dB -20
S22 dB -15
Output P1dB
dBm +18.5
Output IP3
dBm +33.5
Noise Figure
dB 4.5
Supply Voltage
V
6
Device Current mA 75
1. Data represents typical performance in an application board with
T = 25ºC, Vs = +6 V, and Rbias = 10 Ω in a 50 Ω system.
1900
16
-25
-15
+18.1
+32.3
4.5
6
75
Ordering Information
Part No.
AG603-89
AG603-89PCB
Description
InGaP HBT Gain Block
SOT-89 Style Package
(Available in Tape & Reel)
Fully Assembled Application Board
RF IN
C1
Blocking
Capacitor
L1
RF
Choke
AG603
RF OUT
C2
Blocking
Capacitor
This document contains information on a new product.
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6620 • e-mail: [email protected] • Web site: www.wj.com
June 2002
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet AG603.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AG602-86 | InGaP HBT Gain Block |  ETC |
| AG602-86PCB | InGaP HBT Gain Block | ETC |
| AG602-89 | InGaP HBT Gain Block | ETC |
| AG602-89G | InGaP HBT Gain Block | ETC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |