DataSheet.jp

UPD78P058 の電気的特性と機能

UPD78P058のメーカーはNEC Electronicsです、この部品の機能は「8-BIT SINGLE-CHIP MICROCOMPUTER」です。


製品の詳細 ( Datasheet PDF )

部品番号 UPD78P058
部品説明 8-BIT SINGLE-CHIP MICROCOMPUTER
メーカ NEC Electronics
ロゴ NEC Electronics ロゴ 




このページの下部にプレビューとUPD78P058ダウンロード(pdfファイル)リンクがあります。

Total 30 pages

No Preview Available !

UPD78P058 Datasheet, UPD78P058 PDF,ピン配置, 機能
User’s Manual
µPD78054, 78054Y SUBSERIES
8-BIT SINGLE-CHIP MICROCONTROLLERS
µPD78052
µPD78053
µPD78054
µPD78P054
µPD78055
µPD78056
µPD78058
µPD78P058
µPD78052(A)
µPD78053(A)
µPD78054(A)
µPD78052Y
µPD78053Y
µPD78054Y
µPD78055Y
µPD78056Y
µPD78058Y
µPD78P058Y
Document No. U11747EJ5V0UM00 (5th edition)
Date Published April 1998 N CP (K)
© 1992
Printed in Japan

1 Page





UPD78P058 pdf, ピン配列
NOTES FOR CMOS DEVICES
1 PRECAUTION AGAINST ESD FOR SEMICONDUCTORS
Note:
Strong electric field, when exposed to a MOS device, can cause destruction of the gate oxide and
ultimately degrade the device operation. Steps must be taken to stop generation of static electricity
as much as possible, and quickly dissipate it once, when it has occurred. Environmental control
must be adequate. When it is dry, humidifier should be used. It is recommended to avoid using
insulators that easily build static electricity. Semiconductor devices must be stored and transported
in an anti-static container, static shielding bag or conductive material. All test and measurement
tools including work bench and floor should be grounded. The operator should be grounded using
wrist strap. Semiconductor devices must not be touched with bare hands. Similar precautions need
to be taken for PW boards with semiconductor devices on it.
2 HANDLING OF UNUSED INPUT PINS FOR CMOS
Note:
No connection for CMOS device inputs can be cause of malfunction. If no connection is provided
to the input pins, it is possible that an internal input level may be generated due to noise, etc., hence
causing malfunction. CMOS devices behave differently than Bipolar or NMOS devices. Input levels
of CMOS devices must be fixed high or low by using a pull-up or pull-down circuitry. Each unused
pin should be connected to VDD or GND with a resistor, if it is considered to have a possibility of
being an output pin. All handling related to the unused pins must be judged device by device and
related specifications governing the devices.
3 STATUS BEFORE INITIALIZATION OF MOS DEVICES
Note:
Power-on does not necessarily define initial status of MOS device. Production process of MOS
does not define the initial operation status of the device. Immediately after the power source is
turned ON, the devices with reset function have not yet been initialized. Hence, power-on does
not guarantee out-pin levels, I/O settings or contents of registers. Device is not initialized until the
reset signal is received. Reset operation must be executed immediately after power-on for devices
having reset function.
3


3Pages


UPD78P058 電子部品, 半導体
Regional Information
Some information contained in this document may vary from country to country. Before using any NEC
product in your application, pIease contact the NEC office in your country to obtain a list of authorized
representatives and distributors. They will verify:
Device availability
Ordering information
Product release schedule
Availability of related technical literature
Development environment specifications (for example, specifications for third-party tools and
components, host computers, power plugs, AC supply voltages, and so forth)
Network requirements
In addition, trademarks, registered trademarks, export restrictions, and other legal issues may also vary
from country to country.
NEC Electronics Inc. (U.S.)
Santa Clara, California
Tel: 408-588-6000
800-366-9782
Fax: 408-588-6130
800-729-9288
NEC Electronics (Germany) GmbH
Duesseldorf, Germany
Tel: 0211-65 03 02
Fax: 0211-65 03 490
NEC Electronics (UK) Ltd.
Milton Keynes, UK
Tel: 01908-691-133
Fax: 01908-670-290
NEC Electronics Italiana s.r.1.
Milano, Italy
Tel: 02-66 75 41
Fax: 02-66 75 42 99
NEC Electronics (Germany) GmbH
Benelux Office
Eindhoven, The Netherlands
Tel: 040-2445845
Fax: 040-2444580
NEC Electronics (France) S.A.
Velizy-Villacoublay, France
Tel: 01-30-67 58 00
Fax: 01-30-67 58 99
NEC Electronics (France) S.A.
Spain Office
Madrid, Spain
Tel: 01-504-2787
Fax: 01-504-2860
NEC Electronics (Germany) GmbH
Scandinavia Office
Taeby, Sweden
Tel: 08-63 80 820
Fax: 08-63 80 388
NEC Electronics Hong Kong Ltd.
Hong Kong
Tel: 2886-9318
Fax: 2886-9022/9044
NEC Electronics Hong Kong Ltd.
Seoul Branch
Seoul, Korea
Tel: 02-528-0303
Fax: 02-528-4411
NEC Electronics Singapore Pte. Ltd.
United Square, Singapore 1130
Tel: 65-253-8311
Fax: 65-250-3583
NEC Electronics Taiwan Ltd.
Taipei, Taiwan
Tel: 02-719-2377
Fax: 02-719-5951
NEC do Brasil S.A.
Cumbica-Guarulhos-SP, Brasil
Tel: 011-6465-6810
Fax: 011-6465-6829
J98. 2
6

6 Page



ページ 合計 : 30 ページ
 
PDF
ダウンロード
[ UPD78P058 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
UPD78P054

8-BIT SINGLE-CHIP MICROCOMPUTER

NEC Electronics
NEC Electronics
UPD78P058

8-BIT SINGLE-CHIP MICROCOMPUTER

NEC Electronics
NEC Electronics
UPD78P058F

8-BIT SINGLE-CHIP MICROCONTROLLER

Renesas
Renesas
UPD78P058GC

8 Bit Single-Chip Micorcontroller

NEC Electronics
NEC Electronics


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap