DataSheet.jp

BTS50070-1TMA の電気的特性と機能

BTS50070-1TMAのメーカーはInfineon Technologiesです、この部品の機能は「Smart High-Side Power Switch」です。


製品の詳細 ( Datasheet PDF )

部品番号 BTS50070-1TMA
部品説明 Smart High-Side Power Switch
メーカ Infineon Technologies
ロゴ Infineon Technologies ロゴ 




このページの下部にプレビューとBTS50070-1TMAダウンロード(pdfファイル)リンクがあります。

Total 27 pages

No Preview Available !

BTS50070-1TMA Datasheet, BTS50070-1TMA PDF,ピン配置, 機能
Datasheet, Rev. 1.0, Sept. 2008
BTS50070-1TMA
Smart High-Side Power Switch
PROFET™
One Channel
Automotive Power

1 Page





BTS50070-1TMA pdf, ピン配列
Smart High-Side Power Switch
PROFET™
One Channel
BTS50070-1TMA
1 Overview
Features
• Part of scalable product family
• Load current sense
• Reversave™
• Very low standby current
• Current controlled input pin
• Improved electromagnetic compatibility (EMC)
• Fast demagnetization of inductive loads
• Stable behavior at under-voltage
• Green Product (RoHS compliant)
• AEC qualified
PG-TO220-7-4
Operating voltage
Vbb(on)
Minimum overvoltage protection
VON(CL)
Maximum on-state resistance at 150°C
RDS(ON)
Nominal load current
IL(nom)
Minimum load current limitation peak
ILpeak(SC)
Maximum stand-by current for whole device with load at Tj = 25 °C Ibb(OFF)
5.5 .. 30 V
39 V
14 m
12 A
90 A
6 µA
The BTS50070-1TMA is a one channel high-side power switch in PG-TO220-7-4 package providing embedded
protective functions.
The power transistor is built by a N-channel vertical power MOSFET with charge pump. The design is based on
Smart SIPMOS chip on chip technology.
The BTS50070-1TMA has a current controlled input and offers a diagnostic feedback with load current sense and
a defined fault signal in case of overload operation, overtemperature shutdown and/or short circuit shutdown.
Type
BTS50070-1TMA
Datasheet
Package
PG-TO220-7-4
3
Marking
S50070A
Rev. 1.0, 2008-09-05


3Pages


BTS50070-1TMA 電子部品, 半導体
3 Pin Configuration
3.1 Pin Assignment BTS50070-1TMA
TAB
Vbb
Smart High-Side Power Switch
BTS50070-1TMA
Pin Configuration
Figure 3 Pin Configuration
3.2 Pin Definitions and Functions
TO220-7 . emf
Pin Symbol
Function
1, 2 OUT
Output; output to the load; pin 1, 2, 6 and 7 must be externally shorted.1)
3 IN
Input; activates the power switch if shorted to ground.
4 Vbb
5 IS
Supply Voltage; positive power supply voltage; tab and pin 4 are internally shorted.
Sense Output; Diagnostic feedback; provides at normal operation a sense current
proportional to the load current; in case of overload, overtemperature and/or short
circuit a defined current is provided (see Table 1 “Truth Table” on Page 21).
6, 7 OUT
Output; output to the load; pin 1, 2, 6 and 7 must be externally shorted.1)
TAB Vbb
Supply Voltage; positive power supply voltage; tab and pin 4 are internally shorted.
1) Not shorting all outputs will considerably increase the on-state resistance, reduce the peak current capability, the clamping
capability and decrease the current sense accuracy.
Datasheet
6 Rev. 1.0, 2008-09-05

6 Page



ページ 合計 : 27 ページ
 
PDF
ダウンロード
[ BTS50070-1TMA データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
BTS50070-1TMA

Smart High-Side Power Switch

Infineon Technologies
Infineon Technologies
BTS50070-1TMB

Smart High-Side Power Switch

Infineon Technologies
Infineon Technologies


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap