DataSheet.es    


PDF SN8P2741A Data sheet ( Hoja de datos )

Número de pieza SN8P2741A
Descripción 8-Bit Micro-Controller
Fabricantes Sonix　
Logotipo Sonix Logotipo



Hay una vista previa y un enlace de descarga de SN8P2741A (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! SN8P2741A Hoja de datos, Descripción, Manual

SN8P2741A
ADC, OP-amp, Comparator 8-Bit Micro-Controller
SN8P2741A
USER’S MANUAL
Preliminary Version 0.4
SN8P2741A
SONiX 8-Bit Micro-Controller
SONIX reserves the right to make change without further notice to any products herein to improve reliability, function or design. SONIX does not
assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent
rights nor the rights of others. SONIX products are not designed, intended, or authorized for us as components in systems intended, for surgical
implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SONIX product
could create a situation where personal injury or death may occur. Should Buyer purchase or use SONIX products for any such unintended or
unauthorized application. Buyer shall indemnify and hold SONIX and its officers, employees, subsidiaries, affiliates and distributors harmless against
all claims, cost, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use even if such claim alleges that SONIX was negligent regarding the design or manufacture of
the part.
SONiX TECHNOLOGY CO., LTD
Page 1
Preliminary Version 0.4

1 page




SN8P2741A pdf
SN8P2741A
ADC, OP-amp, Comparator 8-Bit Micro-Controller
8.2.5 T0 TIMER OPERATION EXPLAME........................................................................................ 86
8.3 T1 8-BIT TIMER .............................................................................................................................. 87
8.3.1 OVERVIEW .............................................................................................................................. 87
8.3.2 T1 TIMER OPERATION .......................................................................................................... 87
8.3.3 T1 TIMER’S TC0 PULSE OUTPUT TRIGGER MODE .......................................................... 88
8.3.4 T1M MODE REGISTER ........................................................................................................... 89
8.3.5 T1C COUNTING REGISTER................................................................................................... 90
8.3.6 T1R AUTO-RELOAD REGISTER ............................................................................................ 90
8.3.7 T1 TIMER OPERATION EXPLAME........................................................................................ 91
8.4 T2 8-BIT TIMER .............................................................................................................................. 92
8.4.1 OVERVIEW .............................................................................................................................. 92
8.4.2 T2 TIMER OPERATION .......................................................................................................... 92
8.4.3 T2 TIMER’S TC0 PULSE OUTPUT TRIGGER MODE .......................................................... 93
8.4.4 T2M MODE REGISTER ........................................................................................................... 94
8.4.5 T2C COUNTING REGISTER................................................................................................... 95
8.4.6 T2R AUTO-RELOAD REGISTER ............................................................................................ 95
8.4.7 T2 TIMER OPERATION EXPLAME........................................................................................ 96
8.5 TC0 8-BIT TIMER/PWM/PULSE GENERATOR .......................................................................... 98
8.5.1 OVERVIEW .............................................................................................................................. 98
8.5.2 TC0 TIMER OPERATION........................................................................................................ 99
8.5.3 PULSE WIDTH MODULATION (PWM) ............................................................................... 100
8.5.4 TC0 PULSE GENERATOR FUNCTION................................................................................ 101
8.5.5 TC0M MODE REGISTER ...................................................................................................... 102
8.5.6 TC0C COUNTING REGISTER .............................................................................................. 103
8.5.7 TC0R AUTO-RELOAD REGISTER........................................................................................ 103
8.5.8 TC0D PWM DUTY REGISTER.............................................................................................. 104
8.5.9 TC0 TIMER OPERATION EXPLAME ................................................................................... 105
99 2K/4K BUZZER GENERATOR......................................................................................................... 107
9.1 OVERVIEW................................................................................................................................... 107
9.2 BZM REGISTER............................................................................................................................ 107
1100 ANALOG COMPARAOTR 0 ......................................................................................................... 108
10.1 OVERVIEW................................................................................................................................... 108
10.2 NORMAL COMPARATOR MODE.............................................................................................. 109
10.2.1 COMPARATOR ENABLE ...................................................................................................... 109
10.2.2 CM0OUT, CM0G AND CM0IRQ STATUS............................................................................ 109
10.2.3 DE-BOUNCE TIME CONTROL ............................................................................................ 110
10.2.4 DELAY TIME CONTROL....................................................................................................... 111
10.3 COMPARATOR 0 SPECIAL FUCNITON.................................................................................... 112
10.4 COMPARATOR MODE REGISTER ............................................................................................ 113
10.5 COMPARATOR 0 PIN CONFIGURATION................................................................................. 114
10.6 COMPARATOR APPLICATION NOTICE .................................................................................. 114
10.7 COMPARATOR 0 OPERATION EXPLAME .............................................................................. 115
1111 ANALOG COMPARAOTR 1 ......................................................................................................... 116
11.1 OVERVIEW................................................................................................................................... 116
11.2 NORMAL COMPARATOR MODE.............................................................................................. 117
11.2.1 COMPARATOR ENABLE ...................................................................................................... 117
11.2.2 CM1OUT, CM1G AND CM1IRQ STATUS............................................................................ 117
11.2.3 DE-BOUNCE TIME CONTROL ............................................................................................ 118
11.3 COMPARATOR 1 SPECIAL FUCNITON.................................................................................... 119
11.4 COMPARATOR 1 MODE REGISTER ......................................................................................... 120
11.5 COMPARATOR 1 APPLICATION NOTICE ............................................................................... 121
11.6 COMPARATOR 1 OPERATION EXPLAME .............................................................................. 122
SONiX TECHNOLOGY CO., LTD
Page 5
Preliminary Version 0.4

5 Page





SN8P2741A arduino
SN8P2741A
ADC, OP-amp, Comparator 8-Bit Micro-Controller
1.5 PIN CIRCUIT DIAGRAMS
Reset shared pin with UART and Open-drain structure:
OUTSIDE
INSIDE
OTP Program Mode.
VCC
R
Pin
Reset Code URXEN
option
OTP VPP Input.
URX input.
Input Bus
Reset Trigger.
P4M.7
N-MOS
Output
Latch
P0.0 shared pin structure:
Pull-Up resistor
Output bus
P0UR.0
P0M.0
Pin Input Bus.
BZEN
MUX
Output
Latch
P0M.0
BZEN
P0.1 Open-drain shared pin, output only:
VCC OUTSIDE INSIDE
Output Bus.
Buzzer signal.
R
TC0ENB
PWM0OUT
N-MOS
Pin
Output
Latch
Output Bus.
MUX
PWM output signal.
SONiX TECHNOLOGY CO., LTD
Page 11
Preliminary Version 0.4

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet SN8P2741A.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
SN8P274118-Bit Micro-ControllerSonix
Sonix
SN8P2741A8-Bit Micro-ControllerSonix
Sonix

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

 Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

 Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar