|
|
PDF UD0032KQ045 Data sheet ( Hoja de datos )
| Número de pieza | UD0032KQ045 | |
| Descripción | Display Module | |
| Fabricantes | UNICO DISPLAY TECHNOLOGY | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de UD0032KQ045 (archivo pdf) en la parte inferior de esta página. Total 19 Páginas | ||
|
No Preview Available !
深圳市華宇彩晶科技有限公司
SHENZHEN UNICO DISPLAY TECHNOLOGY CO.,LTD
PRODUCT SPECIFICATION
Rev. A
Customer Name:
Customer No:
Module No:
UD0032KQ045
CUSTOMER’S APPROVAL:
A:尺寸（Structure）
□OK
□NG
B:效果（Effection）
□OK
□NG
C:可靠性（Reliability）
□OK
□NG
D:其他（Other）
客户签字/日期（Customer’s Signature&Date）:
Please sign the cover page of the spec for your approval and return it to our local sales
within a month after your receipt of the spec from Unico Display. In the case Unico Display
does not receive the signed spec even after one month later; in general we will consider
that the spec was already accepted by your company.
Prepared
Checked
Approved
Date
Address: 深圳市南山區深圳軟件園二期九棟四樓東 402
Tel: 0755-86555255
Fax: 0755-86555256
-0-
1 page  
2. OUTLINE DIMENSION
`
Module No:UD0032KQ045
PRODUCT SPECIFICATION
Revision：A
-4-
5 Page 
9. SEQUENTIAL CHART
9.1 RESET TIMING CHARACTERISTICS
`
(VSS=VSSI=DVSS=0V, VDDI=1.65V to 3.3V, VDD=2.3V to 4.8V,Ta = -30 to 70°C)
Signal Symbol Parameter
MIN TYP MAX Unit Description
tRESW Reset ″L″ pulse width (Note 1) 10 -- -- US
RESX tREST Reset complete time (Note 2)
-- -- 5 MS When reset applied
during Sleep In Mode
-- -- 120 MS When reset applied
duringSleepOut Mode
Note 1) Spike due to an electrostatic discharge on RESX line does not cause irregular system reset according
to the table below.
Note 2) During the resetting period, the display will be blanked (The display is entering blanking
sequence, which maximum time is 120 ms, when Reset Starts in Sleep Out –mode. The display
remains the blank state in Sleep In–mode) and then return to Default condition for H/W reset.
Note 3) During Reset Complete Time, values in OTP memory will be latched to internal
register during this period. This loading is done every time when there is H/W reset complete time
(tREST) within 5ms after a rising edge of RESX.
Note 4) Spike Rejection also applies during a valid reset pulse as shown below:
Note 5) It is necessary to wait 5msec after releasing RESX before sending commands. Also
Sleep Out command
cannot be sent for 120msec
Module No:UD0032KQ045
PRODUCT SPECIFICATION
Revision：A
- 10 -
11 Page | ||
| Páginas | Total 19 Páginas | |
| PDF Descargar | [ Datasheet UD0032KQ045.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| UD0032KQ045 | Display Module | UNICO DISPLAY TECHNOLOGY |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |