DataSheet.jp

CDP-TX-02FP-R の電気的特性と機能

CDP-TX-02FP-RのメーカーはCIRCUIT DESIGNです、この部品の機能は「UHF Narrow band radio data module」です。


製品の詳細 ( Datasheet PDF )

部品番号 CDP-TX-02FP-R
部品説明 UHF Narrow band radio data module
メーカ CIRCUIT DESIGN
ロゴ CIRCUIT DESIGN ロゴ 




このページの下部にプレビューとCDP-TX-02FP-Rダウンロード(pdfファイル)リンクがあります。
Total 23 pages

No Preview Available !

CDP-TX-02FP-R Datasheet, CDP-TX-02FP-R PDF,ピン配置, 機能
OPERATION GUIDE
UHF Narrow band radio data module
CDP-TX/RX-02F-R 434 MHz
Operation Guide
Version 1.6 (Feb. 2014)
OG_CDP-02F-R_v16e
CIRCUIT DESIGN, INC.,
7557-1 Hotaka, Azumino
Nagano 399-8303 JAPAN
Tel: + +81-(0)263-82-1024
Fax: + +81-(0)263-82-1016
http://www.circuitdesign.jp

1 Page





CDP-TX-02FP-R pdf, ピン配列
GENERAL DESCRIPTION & FEATURES
OPERATION GUIDE.
Features
R&TTE (EN 300 220) / RoHS compliant
1 mW / 10 mW selectable
Frequency selection free in 128 channels for 433 MHz
High sensitivity receiver
FM narrow band modulation
Applications
Radio remote control cranes and machines
Factory automation M2M
Security systems
Alarms
Telemetry systems
Models
Model name
CDP-TX-02F-R 434MHz
CDP-RX-02F-R 434MHz
CDP-TX-02FP-R 434MHz
CDP-RX-02FP-R 434MHz
TX/RX
Transmitter
Receiver
Transmitter
Receiver
Ch setting
Dip switches
Dip switches
Pin connectors
Pin connectors
For the CDP-TX/RX-02F-R, frequency setting is performed with the 7-bit switches. Instead of
these 7-bit switches, the CDP-TX/RX-02FP-R has 14-pin connectors for frequency setting,
making it possible to set the channels externally.
There are no other technical and mechanical differences between CDP-02F-R and CDP-02FP-
R.
General description
The CDP-TX-02F-R and CDP-RX-02F-R are an RoHS compliant, embedded industrial narrowband
FM radio transmitter and receiver.
They are suitable for various application fields such as wireless data communication, remote control,
telemetry or wireless security systems. They are easy to use and integrate into application systems.
Both CDP-TX-02F-R and CDP-RX-02F-R are equipped with a frequency synthesizer system with
micro controller. Available frequency ranges are from 433.1875 MHz to 434.7750 MHz (128 channels).
The compact size, low operating voltage and frequency selectability of the CDP-02F-R make it ideal
for various applications where its interference rejection and practical distance range is far better than
similar RF modules based on wide band SAW-resonator frequency generators.
The CDP-RX-02F-R receiver has excellent blocking and adjacent channel selectivity.
OG_CDP-02F-R_v16e
3
Circuit Design, Inc.


3Pages


CDP-TX-02FP-R 電子部品, 半導体
PIN DESCRIPTION
CDP-TX-02F(P)-R
Pin name I/O
Description
ANT
O
RF output terminal
Antenna impedance nominal 50
GND
The ground for the power supply.
Connect it to the ground plane as well as
I to the bottom part of the case. The
ground plane has an impact on the range
and the stability of operation.
OPERATION GUIDE.
Equivalent circuit
VCC
The power supply terminal. The supply
voltage is DC 3.0 to 12 V. Power supply
I noise and ripple have an impact on
performance, so eliminate them as far as
possible with filters and capacitors.
DATAIN
I
Digital data input terminal
Interface voltage: H = Vcc L = GND
OG_CDP-02F-R_v16e
6
Circuit Design, Inc.

6 Page



ページ 合計 : 23 ページ
 
PDF
ダウンロード
[ CDP-TX-02FP-R データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
CDP-TX-02FP-R

UHF Narrow band radio data module

CIRCUIT DESIGN
CIRCUIT DESIGN


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap