|
|
RTL8304EのメーカーはRealtekです、この部品の機能は「PROGRAMMING GUIDE」です。 |
部品番号 | RTL8304E |
| |
部品説明 | PROGRAMMING GUIDE | ||
メーカ | Realtek | ||
ロゴ | |||
このページの下部にプレビューとRTL8304Eダウンロード(pdfファイル)リンクがあります。 Total 30 pages
RTL8306E/8306M/8304E
PROGRAMMING GUIDE
V1.0.2
Feb 2, 2012
Realtek Semiconductor Corp.
No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan
Tel.: +886-3-578-0211. Fax: +886-3-577-6047
www.realtek.com
1 Rev. 1.0.2
1 Page rtk_port_macForceLinkExt_get
rtk_mib_get;
rtk_mib_cntType_set/get;
rtk_mib_reset;
rtk_mii1Disable_set();
RTL8306E/8306M/8304E
PROGRAMMING GUIDE
3 Rev. 1.0.2
3Pages RTL8306E/8306M/8304E
PROGRAMMING GUIDE
1 Overview
The RTL8306E release package contains ASIC drivers, which provides general APIs that based on
user configuration to configure relative ASIC registers. Inside of the ASIC driver, it uses GPIO to emulate
MDC/MDIO signal to communicate with RTL8306E. This part needs to be porting to the target platform.
The RTL8306E release package can also be applied to other chips, such as RTL8304E/RTL8306M. These
ASICs may have different port numbers. For example RTL8304E only have 4 ports, but RTL8306E have
6 ports. The port number descriptions for different ASICs can be found in chapter 7.
This SDK API programming guide file uses RTL8306E as an example to descript the usage
of API functions. But for different ASICs, the port parameter which is needed by some API fu
nction is different from RTL8306E , due to the AISCs’ different port numbers. So in order to us
e ASIC driver code, it’s recommended for you to make clear of the ASIC’s port number at first.
And then make some configuration code modification based on the descriptions of sector 3.3 an
d chapter 7.
6 Rev. 1.0.2
6 Page | |||
ページ | 合計 : 30 ページ | ||
|
PDF ダウンロード | [ RTL8304E データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
RTL8304E | PROGRAMMING GUIDE | Realtek |