DataSheet.jp

OPB483L11 の電気的特性と機能

OPB483L11のメーカーはOPTEKです、この部品の機能は「Slotted Optical Switch」です。


製品の詳細 ( Datasheet PDF )

部品番号 OPB483L11
部品説明 Slotted Optical Switch
メーカ OPTEK
ロゴ OPTEK ロゴ 




このページの下部にプレビューとOPB483L11ダウンロード(pdfファイル)リンクがあります。

Total 7 pages

No Preview Available !

OPB483L11 Datasheet, OPB483L11 PDF,ピン配置, 機能
Photologic® Slotted Optical Switch
OPB460, OPB470, OPB480, OPB490 Series
Features:
 Choice of pins or wires mounting configuration
 Choice of aperture
 Choice of output configuration
 Choice of opaque or IR transmissive shell material
 Data rates to 250 kBaud
 Low power consumption
Description:
The OPB460, OPB470, OPB480 and OPB490 series of Photologic® photo integrated circuit switches provide
optimum flexibility for the design engineer. Building from a standard housing with a 0.125” (3.180 mm) wide slot, a
user can specify the type and polarity of TTL output, discrete shell material, aperture width and choice of mounting
configurations. OPB460 through OPB473 have 0.425” (10.795 mm) PCBoard leads with 0.320” (8.1 mm)
spacing. OPB480 through OPB493 have 24” (609 mm) 26 AWG wires (UL approved wires).
All devices in this series exhibit performance over supply voltages ranging from 4.5 V to 16.0 V, and may be
specified as buffered or inverted with 10 kW Pull-up or Open Collector output. Devices are also TTI/LSTTL
compatible and can drive up to 10 TTL loads.
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
Mechanical switch replacement
Speed indication (tachometer)
Mechanical limit indication
Edge sensing
Part Number Guide — OPB460, OPB470, OPB480, OPB490 Series
OPB 4 X X X 1 1 X
OPTEK Assembly
Photologic™ Sensor Family
Discrete Housing Material:
6 — Transmissive Shell, PCBoard Mountable
7 — Opaque Shell, PCBoard Mountable
8 — Transmissive Shell, Wire Termination
9 — Opaque Shell, Wire Termination
Electrical Specifications:
0 — Buffered 10 kOutput
1 — Buffered Open-Collector Output
2 — Inverted 10 kOutput
3 — Inverted Open-Collector Output
All PCBoard Versions RoHS Compliant:
Z = Wire Version RoHS Compliant
Sensor Aperture:
1 = 0.010” [0.25 mm]
Emitter Aperture:
1 = 0.010” [0.25 mm]
Mounting Configurations:
L — Emitter side mounting tab only
N — No mounting tabs
P — Sensor side mounting tab only
T — Two mounting tabs
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.3 06/14
Page 1 of 7

1 Page





OPB483L11 pdf, ピン配列
Photologic® Slotted Optical Switch
OPB460, OPB470, OPB480, OPB490 Series
Absolute Maximum Ratings (TA=25°C unless otherwise noted)
Storage & Operating Temperature Range
Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron](1)
Input Infrared LED
Supply Voltage, VCC (not to exceed 3 seconds)
Diode Forward DC Current
Diode Reverse DC Voltage
Input Diode Power Dissipation(2)
Output Photologic®
Voltage at Output Lead (Open Collector Output)
Output Photologic® Power Dissipation(3)
-40° C to +85° C
260°C
18 V
40 mA
2V
75 mW
25 V
200 mW
Total Device Power Dissipation(4)
275 mW
Notes:
(1) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
(2) Derate linearly 1.67 mW/°C above 25° C (OPB460, OPB470) or derate linearly 1.82 mW/°C above 25° C (OPB480, OPB490).
(3) Derate linearly 1.50 mW/°C above 25° C (OPB460, OPB470) or derate linearly 1.64 mW/°C above 25° C(OPB480, OPB490).
(4) Derate linearly 3.17 mW/°C above 25° C (OPB460, OPB470) or derate linearly 3.45 mW/°C above 25° C (OPB480, OPB490).
(5) The OPB460/OPB470 series are terminated with 0.020” square leads designed for printed circuit board mounting.
(6) The OPB480/OPB490 series of switches are terminated with 24” (609.600 mm) of 7-strand 26 AWG, UL rated insulated wire on
each terminal. Insulation colors and functions are: red (anode), black (cathode), white (VCC,), blue (output) and green (ground).
Other wire lengths and/or colors in addition to customer selected connectors are available. Contact your local representative or
call the factory.
OPB460/470/480/490 Buffered 10K Pull-Up
OPB461/471/481/491 Buffered Open-Collector
OPB462/472/482/492 Inverted 10K Pull-Up
OPB463/473/483/493 Inverted Open-Collector
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.3 06/14
Page 3 of 7


3Pages


OPB483L11 電子部品, 半導体
Photologic® Slotted Optical Switch
OPB460, OPB470, OPB480, OPB490 Series
OPB481N51 - Flag Next to Emitter
1.20
Top to Bottom (Back)
Top to Bottom
1.00
OPB481N51 - Flag Next to Sensor
1.20
1.00
Top to Bottom (Back)
Top to Bottom
0.80
0.60
Right to Left (Back)
Right to Left
0.80
0.60
Right to Left (Back)
Right to Left
0.40
0.20
Left to Right
Left to Right (Back)
0.40
0.20
Left to Right
Left to Right (Back)
0.00
0.00
0.05 0.10 0.15 0.20
Displacement Distance (inches)
0.25
OPB481N51 - Flag in Middle of Slot
1.20
Top to Bottom (Back)
Top to Bottom
1.00
0.80
0.60
Right to Left (Back)
Right to Left
0.40
0.20
Left to Right
Left to Right (Back)
0.00
0.00
0.05 0.10 0.15 0.20
Displacement Distance (inches)
0.25
0 Top to Bottom
Left to Right
Emitter
Right to Left
Sensor
0 Width
0.00
0.00
0.05 0.10 0.15 0.20
Displacement Distance (inches)
0.25
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.3 06/14
Page 6 of 7
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com

6 Page



ページ 合計 : 7 ページ
 
PDF
ダウンロード
[ OPB483L11 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
OPB483L11

Slotted Optical Switch

OPTEK
OPTEK
OPB483L11Z

Slotted Optical Switch

OPTEK
OPTEK


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap