|
|
IR67-21C-TR8のメーカーはEverlight Electronicsです、この部品の機能は「Top Infrared LED」です。 |
部品番号 | IR67-21C-TR8 |
| |
部品説明 | Top Infrared LED | ||
メーカ | Everlight Electronics | ||
ロゴ | |||
このページの下部にプレビューとIR67-21C-TR8ダウンロード(pdfファイル)リンクがあります。 Total 9 pages
Technical Data Sheet
Top Infrared LED
IR67-21C/TR8
Features
․Compatible with infrared and vapor phase reflow solder process.
․Low forward voltage.
․View angle 120°
․Pb free
․The product itself will remain within RoHS compliant version.
Description
․ IR67-21C/TR8 is an infrared emitting diode in miniature SMD package which is molded in a water
clear plastic with flat top view lens
․ The device is spectrally matched with silicon photodiode and phototransistor.
Applications
․Sensor
․Optoelectronic switch
․Camera
․VCR
․Video
․Smoke detector
Device Selection Guide
Device No.
IR67-21C/TR8
Chip Material
GaAlAs
Lens Color
Water clear
1 Copyright © 2010, Everlight All Rights Reserved. Release Date : JULY.10.2013. Issue No: DIR-0000986
www.everlight.com
1 Page DATASHEET
IR67-21C/TR8
Electro-Optical Characteristics (Ta=25℃)
Parameter
Radiant Intensity
Peak Wavelength
Spectral Bandwidth
Forward Voltage
Reverse Current
View Angle
Symbol
Ie
λp
Δλ
VF
IR
2θ1/2
Min. Typ. Max.
Unit
1.0 1.5 --
mW /sr
4 8 20
-- 940 --
-- 45 --
-- 1.2 1.5
-- 1.4 1.8
-- -- 10
-- 120 --
nm
nm
V
μA
deg
Condition
IF=20mA
≦ μ ≦. IF=100mA
Pulse Width 100 s ,Duty 1%
IF=100mA
IF=100mA
IF=20mA
≦ μ ≦IF=100mA
Pulse Width 100 s ,Duty 1%
VR=5V
IF=20mA
3 Copyright © 2010, Everlight All Rights Reserved. Release Date : JULY.10.2013. Issue No: DIR-0000986
www.everlight.com
3Pages DATASHEET
IR67-21C/TR8
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage
time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
6 Copyright © 2010, Everlight All Rights Reserved. Release Date : JULY.10.2013. Issue No: DIR-0000986
www.everlight.com
6 Page | |||
ページ | 合計 : 9 ページ | ||
|
PDF ダウンロード | [ IR67-21C-TR8 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
IR67-21C-TR8 | Top Infrared LED | Everlight Electronics |