|
|
AL081C140WのメーカーはRoithnerです、この部品の機能は「High Power Linear Infrared Laser Diode Array」です。 |
部品番号 | AL081C140W |
| |
部品説明 | High Power Linear Infrared Laser Diode Array | ||
メーカ | Roithner | ||
ロゴ | |||
このページの下部にプレビューとAL081C140Wダウンロード(pdfファイル)リンクがあります。 Total 3 pages
AL081C140W
TECHNICAL DATA
High Power Linear Infrared Laser Diode Array
Features
• Output Power: 140 W
• 780-830 nm Emission Wavelength
• Spectral Width: ≤4 nm
• High Reliability, High Efficiency
Applications
• Laser Pumping
• Medical Usage
• High power laser diode applications
Specifications (25°C)
Item
Optical Specifications
CW Output Power
Output Power / Bar
Array Length
Center Wavelength
Wavelength Tolerance
Spectral Width
Number of Bars
Wavelength Temperature Coefficient
Beam Divergence
Electrical Specifications
Slope Efficiency
Conversion Efficiency
Threshold Current
Operating Current
Operating Voltage
Absolute Maximum Ratings
Reverse Voltage
Operating Temperature
Storage Temperature
Symbol
PO
PS
L
λC
Δλ
θ┴×θ║
ES
NS
ITH
IF
UF
UR
TOP
TSTG
Value
140
20
80
780-830
±5
≤4
7
0.3
40x8
≥1
≥ 40%
≤5
≤ 25
≤ 14
2.5
+10 … +40
-40 ... +85
Unit
W
W
mm
nm
nm
nm
nm/°C
deg
W/A
A
A
V
V
°C
°C
20.09.2010
AL081C140W
1 of 3
1 Page Notes
1. Caution! Don't look at the laser beam directly, because it's harmful to eyes.
2. The storage temperature is between -40 and 85°C.
3. In generally, the lifetime can be shortened by high temperature. So the generated heat
must be removed in time when the LD working. The water cooling system, forced air
cooling or TEC system are recommended for keeping the LD at a suitable temperature.
4. Constant-current power supply with voltage regulator should be used to avoid surge. To
use a laser diode in following sequences: Turn on the power supply; connect to the laser
diode; and then increase the current gradually to the specified operating value. To shut
down the laser diode, please decrease the current to zero gradually, and then turn off the
power. Please make sure that the power supply has no current overshoot at any time. The
current overshoot can damage the laser diodes permanently.
5. The high power laser diode arrays are very sensitive to electrostatic. Please wear anti-
static bracelet during operating with the laser diode arrays.
6. Be sure that the operating current does not exceed the specified operating current.
Otherwise, it will accelerate laser aging, shorten lifetime or even damage devices
permanently.
7. A clean, dry and ventilated environment should be available when storing and operating
laser diode arrays. Dust may degrade the laser diode arrays.
20.09.2010
AL081C140W
3 of 3
3Pages | |||
ページ | 合計 : 3 ページ | ||
|
PDF ダウンロード | [ AL081C140W データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
AL081C140W | High Power Linear Infrared Laser Diode Array | Roithner |