|
|
PDF LM230WF6-SLA1 Data sheet ( Hoja de datos )
| Número de pieza | LM230WF6-SLA1 | |
| Descripción | Full HD TFT LCD | |
| Fabricantes | LG | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LM230WF6-SLA1 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
Product Specification
SPECIFICATION
FOR
APPROVAL
LM230WF6
Liquid Crystal Display
( ) Preliminary Specification
(● ) Final Specification
Title
23” Full HD TFT LCD
BUYER
MODEL
Mitsubishi
APPROVED BY
/
SIGNATURE
DATE
/
/
SUPPLIER
LG Display Co., Ltd.
*MODEL
LM230WF6
SUFFIX
SLA1
*When you obtain standard approval,
please use the above model name without suffix
APPROVED BY
J. H. Park / G.Manager
REVIEWED BY
SIGNATURE
DATE
J. G. Lee / Manager
PREPARED BY
K. H. Lee / Engineer
Please return 1 copy for your confirmation with
your signature and comments.
Products Engineering Dept.
LG. Display Co., Ltd
Ver. 1.1
Oct. 14. 2010
1 / 34
1 page  
Product Specification
LM230WF6
Liquid Crystal Display
2. Absolute Maximum Ratings
The following are maximum values which, if exceeded, may cause faulty operation or permanent
damage to the unit.
Table 1. Absolute Maximum Ratings
Parameter
Power Supply Input Voltage
Operating Temperature
Storage Temperature
Operating Ambient Humidity
Storage Humidity
Symbol
VLCD
TOP
TST
HOP
HST
Values
Min Max
-0.3 13.0
0 50
-20 60
10 90
10 90
Units
Vdc
°C
°C
%RH
%RH
Notes
at 25 2°C
1
Note : 1. Temperature and relative humidity range are shown in the figure below.
Wet bulb temperature should be 39 °C Max, and no condensation of water.
2. Maximum Storage Humidity is up to 40℃, 90% RH only for 4 corner light leakage Mura.
3. Storage condition is guaranteed under packing condition.
90%
60
Wet Bulb
Temperature [C]
20
10
0
40
30
50
60%
40%
10%
Storage
Operation
-20 0 10 20 30 40 50 60 70 80
Dry Bulb Temperature [C]
Figure 2. Temperature and Relative Humidity
Ver. 1.1
Oct. 14. 2010
5 / 34
5 Page 
3-2-2. Backlight system
Product Specification
LM230WF6
Liquid Crystal Display
Table 6. BACKLIGHT CONNECTOR PIN CONFIGURATION(CN2)
The LED interface connector is a model 10FH-SM1-GAN-TB(LF)(SN) manufactured by JST.
The mating connector is a FFC/FPC specified in LED interface connector specification.
The pin configuration for the connector is shown in the table below.
Pin Symbol
1 FB6
2 FB5
3 FB4
4 VLED
5 VLED
6 VLED
7 VLED
8 FB3
9 FB2
10 FB1
Description
Channel6 Current Feedback
Channel5 Current Feedback
Channel4 Current Feedback
LED Power Supply
LED Power Supply
LED Power Supply
LED Power Supply
Channel3 Current Feedback
Channel2 Current Feedback
Channel1 Current Feedback
Notes
Figure 5. Backlight connector diagram
String 1
String 2
side
front
Rear view of panel
String 3
String 4
String 5
Connector
1
String 6
CNT
10
Ver. 1.1
Oct. 14. 2010
front
1
10
side
String 1
String 2
String 3
String 4
String 5
String 6
CNT
11 / 34
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet LM230WF6-SLA1.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LM230WF6-SLA1 | Full HD TFT LCD | LG |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |