|
|
LD1490-C010のメーカーはRoithnerです、この部品の機能は「Infrared Distributed Feedback Laser Diode」です。 |
部品番号 | LD1490-C010 |
| |
部品説明 | Infrared Distributed Feedback Laser Diode | ||
メーカ | Roithner | ||
ロゴ | |||
このページの下部にプレビューとLD1490-C010ダウンロード(pdfファイル)リンクがあります。 Total 3 pages
LD1490-C010
TECHNICAL DATA
Infrared Distributed Feedback Laser Diode
Features
• Lasing Mode: single longitudinal mode
• Peak Wavelength : typ. 1490 nm
• Optical Ouput Power: 10 mW, CW
• Package: 5.6 mm, flat window
Absolute Maximum Ratings (TC=15°C)
Item
CW Output Power
LD Reverse Voltage
LD Forward Current
PD Reverse Voltage
PD Forward Current
Operating Case Temperature
Storage Temperature
Symbol
PO
Vr
Iop
VrPD
IPD
TC
Tstg
Value
20
2
200
20
10
0 …70
-40 …85
Unit
mW
V
mA
V
mA
°C
°C
Specifications (TC=25°C)
Item
Conditions
Symbol Min.
Typ.
Max.
Optical Specifications
CW Output Power
Center Wavelength
Spectral Width
Wavelength Temp. Coefficient
0 …70 °C
25°C, PO=3mW
0..70°C, PO=5mW
25°C, PO=5mW
0..70°C, PO=5mW
FWHM Beam Divergence
25°C, PO=3mW
Modulation Bandwidth
Resonance Frequency
Electrical Specifications
25°C, Iop= Ith +16mA
60°C, Iop= Ith +16mA
25°C, Iop= Ith +16mA
60°C, Iop= Ith +16mA
PO
λC
Δλ
Δλ / ΔT
Θ║
Θ┴
f-3dB
fr
-
1487
1482
-
-
-
-
6
4
-
-
10
1490
-
0.11
0.11
26
45
-
-
5
4
-
1493
1498
0.2
-
-
-
-
-
-
-
Threshold Current
25 °C
70 °C
Ith
-
-
18 30
35
Operating Current
25°C, PO=5mW
70°C, PO=5mW
Iop
-
-
38
65
Slope Efficiency
25°C, PO=5mW
70°C, PO=5mW
η
0.17 0.26
0.16
Operating Voltage
25°C, PO=5mW
Vop
-
1.2
Serial resistance
25°C, PO=5mW
RS
-
6
Monitor Current
25°C, PO=5mW
Im
40 100
Monitor Dark Current
25°C, VRPD=5V
Id
- 0.1
Monitor Capacitance
F=1MHz, VRPD=5V
Cm
-
5
The above specifications are for reference purpose only and subjected to change without prior notice.Distributed
50
-
-
1.6
-
700
1.0
10
Unit
mW
nm
nm
nm/K
deg.
deg.
GHz
GHz
mA
mA
W/A
V
Ω
µA
µA
pF
08.02.2012
LD1490-C010
1 of 3
1 Page Safety of Laser light
• Laser Light can damage the human eyes and skin. Do not expose the
eye or skin directly to any laser light and/or through optical lens. When
handling the LDs, wear appropriate safety glasses to prevent laser
light, even any reflections from entering to the eye. Focused laser
beam through optical instruments will increase the chance of eye
hazard.
• The LD emitts invisible light
Cautions
1. Operating methode
• This LD shall change its forward voltage requirement and optical ouput power according to
temperature change. Also, the LD will require more operation current to maintain same ouput
power as it degrades. In order to maintain output power, use of APC (Automatic Power
Control) is recommended. Which use monitor feedback to adjust the operation current.
• Confirm that electrical spike current generated by switching on and off does not exceed the
maximum operating current level specified herein above as absolute maximum rating. Also,
employ appropriat countermeasures to reduce chattering and/or overshooting in the circuit.
2. Static Electricity
• Static electricity or electrical surges will reduce and degrade the reliability of the LDs. It is
recommended to use a wrist trap or anti-electrostatic glove when handeling the product.
3. Absolute Maximum Rating
• Active layer of LDs shall have high current density and generate high electric field during its
operation. In order to prevent excessive damage, the LD must be operated striclty below
absolute maximum rating.
08.02.2012
LD1490-C010
3 of 3
3Pages | |||
ページ | 合計 : 3 ページ | ||
|
PDF ダウンロード | [ LD1490-C010 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
LD1490-C010 | Infrared Distributed Feedback Laser Diode | Roithner |