DataSheet.jp

ISL8002A PDF Data sheet ( 特性 )

部品番号 ISL8002A
部品説明 Compact Synchronous Buck Regulators
メーカ Intersil Corporation
ロゴ Intersil Corporation ロゴ 



Total 24 pages
		

No Preview Available !

ISL8002A Datasheet, ISL8002A PDF,ピン配置, 機能
Compact Synchronous Buck Regulators
ISL8002, ISL8002A, ISL80019, ISL80019A
ISL8002, ISL8002A, ISL80019 and ISL80019A are highly
efficient, monolithic, synchronous step-down DC/DC converters
that can deliver up to 2A of continuous output current from a 2.7V
to 5.5V input supply. They use peak current mode control
architecture to allow very low duty cycle operation. They operate
at either 1MHz or 2MHz switching frequency, thereby providing
superior transient response and allowing for the use of small
inductors. They also have excellent stability and provide both
internal and external compensation options.
ISL8002, ISL8002A, ISL80019 and ISL80019A integrate very low
rDS(ON) MOSFETs in order to maximize efficiency. In addition,
since the high side MOSFET is a PMOS, the need for a Boot
capacitor is eliminated, thereby reducing external component
count. They can operate at 100% duty cycle (at 1MHz) with a
dropout of 200mV at 2A output current.
These devices can be configured for either PFM (discontinuous
conduction) or PWM (continuous conduction) operation at light
load. PFM provides high efficiency by reducing switching losses at
light loads and PWM reduces noise susceptibility and RF
interference.
These devices are offered in a space saving 8 pin 2mmx2mm
TDFN lead free package with exposed pad for improved thermal
performance. The complete converter occupies less than
0.10in2 area.
Features
• VIN range 2.7V to 5.5V
• VOUT range is 0.6V to VIN
• IOUT maximum is 1.5A or 2A (see Table 1 on page 3)
• Switching frequency is 1MHz or 2MHz (see Table 1 on
page 3)
• Internal or external compensation option
• Selectable PFM or PWM operation option
• Overcurrent and short circuit protection
• Over-temperature/thermal protection
• VIN Undervoltage Lockout and VOUT Overvoltage Protection
• Up to 95% peak efficiency
Applications
• General purpose point of load DC/DC
• Set-top boxes and cable modems
• FPGA power
• DVD, HDD drives, LCD panels, TV
Related Literature
• See AN1803, “1.5A/2A Low Quiescent Current High
Efficiency Synchronous Buck Regulator”
VIN
GND
+2.7V …+5.5V 1 VIN
C1
22μF
2 EN
EN 3 MODE
PG 4 PG
ISL8002
PAD
9
L1
PHASE 8 1.2μH
C5
22μF
PGND 7
+1.8V/2A
C6
22μF
R1
FB 6 +0.6V 200kΩ 1%
COMP 5
R2
100kΩ 1%
VOUT
GND
R1
=
R2
---V----O----
VFB
1⎠⎞
FIGURE 1. TYPICAL APPLICATION CIRCUIT CONFIGURATION
(INTERNAL COMPENSATION OPTION)
(EQ. 1)
100
90
80
70
2.5VOUT
60
1.8VOUT
1.5VOUT
50
1.2VOUT
0.9VOUT
0.8VOUT
400.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
OUTPUT LOAD (A)
FIGURE 2. EFFICIENCY vs LOAD
FSW = 1MHz, VIN = 3.3V, MODE = PFM, TA = +25°C
July 30, 2013
FN7888.2
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2013. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.

1 Page





ページ 合計 : 24 ページ
PDF
ダウンロード
[ ISL8002A.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
ISL8002

Compact Synchronous Buck Regulators

Intersil Corporation
Intersil Corporation
ISL80020

Compact Synchronous Buck Converters

Intersil Corporation
Intersil Corporation
ISL80020A

Compact Synchronous Buck Converters

Intersil Corporation
Intersil Corporation
ISL8002A

Compact Synchronous Buck Regulators

Intersil Corporation
Intersil Corporation

www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap