|
|
Número de pieza | TX66D11VCOCAB | |
Descripción | TFT LCD Module | |
Fabricantes | HannStar | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de TX66D11VCOCAB (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! Document Title
Document No.
HannStar Display Corp.
TX66D11VCOCAB product Information
Page No.
Revision
1/30
1.0
Hannstar product Porduct Information
Model : TX66D11VCOCAB
Note: 1. Please contact HannStar Display Corp. before designing your product based on this module
specification.
2. The information contained herein is presented merely to indicate the characteristics and performance
of our products. HannStar assumes no responsibility for any intellectual property claims or other
problems that may result from application based on the module described herein.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
1 page Document Title
Document No.
HannStar Display Corp.
TX66D11VCOCAB product Information
Page No.
Revision
5/30
1.0
2.0ABSOLUTE MAXIMUM RATINGS
2.0 Absolute Rating of Environment
Item
Storage temperature
Operating temperature
Vibration(non-operating)
Shock(non-operating)
Storage humidity
Operating humidity
Low pressure(operating)
Low pressure(non-operating)
Symbol
TSTG
TOPR
VNOP
SNOP
HSTG
HOP
PLOP
PLNOP
Min.
-20
0
--
--
10
10
697
116
Max.
60
50
2.0
50
90
80
--
--
Unit
oC
oC
G
G
%RH
%RH
HPa
HPa
Note
(1)
(1)
(2)
(3)
(4)
(4)
(5)
(6)
Note (1)Storage /Operating temperature
Humidity (%)
100
90
80
60 Operating Range
Storage Range
40
20
10
0
-40 -20 0 20 40 50 60 65
Temperature (oC)
Temperature and humidity should be applied glass surface of a TFT module,
not the system installed with a module.
(2) 5-500-5Hz sine wave, X,Y,Z each directions, 30 min/cycle.
(3) 11ms, ±X, ±Y, ±Z direction, one time each. For this shock test,
It is necessary to fill the silicon rubber between the shock jig as buffer.
(4) Max wet bulb temp. =39oC
(5) 2 hrs. (10000 feet)
(6) 24hrs. (50000 feet)
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
5 Page Document Title
Document No.
HannStar Display Corp.
TX66D11VCOCAB product Information
Page No.
Revision
11/30
1.0
Note (7) Definition of crosstalk CT (1) ~ CT (4)
L (n) – LB (n)
CT(n) =
x 100% , n = 1 ~ 4
L (n)
Where L(n) = Luminance of point “n” at pattern A (cd/m2) , n=1 4
LB(n) = Luminance of point “n” at pattern B (cd/m2) , n=1 4
The location measured will be exactly the same in both patterns.
L0: Luminance with all pixels black
L255: Luminance with all pixels white
Gray scale: L127
1
4
V
1
8
V
L(1)
V
1
2
V
1
4
V
1
8
V
L(3)
L(2)
1
8
H
1
4
H
1
2
H
H
Pattern A
L(4)
1
8
H
1
4
H
Gray scale: L0 Gray scale: L127
1
4
V
1
8
V
LB(1)
V
1
2
V
1
4
V
1
8
V
LB(3)
LB(2)
1
8
H
1
4
H
1
2
H
H
Pattern B
LB(4)
1
8
H
1
4
H
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not be
disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display Corporation.
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet TX66D11VCOCAB.PDF ] |
Número de pieza | Descripción | Fabricantes |
TX66D11VCOCAB | TFT LCD Module | HannStar |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |