|
|
Datasheet 5K3MBD1 Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | 5K3MBD1 | Interchangeable mini-BetaCURVE Probe BetaTHERM Sensors
Photo?
Interchangeable mini-BetaCURVE Probe
Interchangeable mini-BetaCURVE Probe:
Applications: ¥ Reduced size allows localized temperature sensing. ¥ Small Medical probes. ¥ Micro-flow sensing. ¥ Aerospace temperature sensing.
Thermistor Configuration
5.08mm Nominal (0.200" |  BetaTHERM | data |
5K3 Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | 5K3A1-25 | Chip Thermistors BetaTHERM Sensors
BetaCHIP Thermistor Series VII
BetaCHIP Thermistor Series VII
Photo ?
Thermistor Configuration
32 AWG Tin Plated Copper Alloy Lead Wires
Thermally Conductive Epoxy Coating
2.413mm (0.095Ó) Max. Dia.
76.2mm +/-3.3mm (3.00Ó +/-0.13Ó)
Example: BetaCHIP Series VII Part Numbe BetaTHERM thermistor | | |
| 2 | 5K3A1A | Chip Thermistors BetaTHERM Sensors
BetaCurve Interchangeable Thermistor Series I
Thermistor Configuration
32 AWG Tin Plated Copper Alloy Lead Wires
Thermally Conductive Epoxy Coating
2.413mm (0.095Ó) Max. Dia.
76.2mm +/-3.3mm (3.00Ó +/-0.13Ó)
Example: BetaCURVE Series I Part Number
10K 3 A 1 A
Tolerance C BetaTHERM thermistor | | |
| 3 | 5K3A1B | Chip Thermistors BetaTHERM Sensors
BetaCurve Interchangeable Thermistor Series I
Thermistor Configuration
32 AWG Tin Plated Copper Alloy Lead Wires
Thermally Conductive Epoxy Coating
2.413mm (0.095Ó) Max. Dia.
76.2mm +/-3.3mm (3.00Ó +/-0.13Ó)
Example: BetaCURVE Series I Part Number
10K 3 A 1 A
Tolerance C BetaTHERM thermistor | | |
| 4 | 5K3A1C | Chip Thermistors BetaTHERM Sensors
BetaCurve Interchangeable Thermistor Series I
Thermistor Configuration
32 AWG Tin Plated Copper Alloy Lead Wires
Thermally Conductive Epoxy Coating
2.413mm (0.095Ó) Max. Dia.
76.2mm +/-3.3mm (3.00Ó +/-0.13Ó)
Example: BetaCURVE Series I Part Number
10K 3 A 1 A
Tolerance C BetaTHERM thermistor | | |
| 5 | 5K3A1D | Chip Thermistors BetaTHERM Sensors
BetaCurve Interchangeable Thermistor Series I
Thermistor Configuration
32 AWG Tin Plated Copper Alloy Lead Wires
Thermally Conductive Epoxy Coating
2.413mm (0.095Ó) Max. Dia.
76.2mm +/-3.3mm (3.00Ó +/-0.13Ó)
Example: BetaCURVE Series I Part Number
10K 3 A 1 A
Tolerance C BetaTHERM thermistor | | |
| 6 | 5K3A1IA | Chip Thermistors BetaTHERM Sensors
BetaCurve Interchangeable Thermistor Series II
BetaCurve Interchangeable Thermistor Series II
.
Thermistor Configuration
30 AWG Sliver Plated Copper Lead Wires With Etched TFE Telfon Insulation,
Thermally Conductive Epoxy Coating
12.7mm +/-3.3mm (0.50Ó +/-0.13Ó)
76.2mm +/-3 BetaTHERM thermistor | | |
| 7 | 5K3A1IB | Chip Thermistors BetaTHERM Sensors
BetaCurve Interchangeable Thermistor Series II
BetaCurve Interchangeable Thermistor Series II
.
Thermistor Configuration
30 AWG Sliver Plated Copper Lead Wires With Etched TFE Telfon Insulation,
Thermally Conductive Epoxy Coating
12.7mm +/-3.3mm (0.50Ó +/-0.13Ó)
76.2mm +/-3 BetaTHERM thermistor | |
| Esta página es del resultado de búsqueda del 5K3MBD1. Si pulsa el resultado de búsqueda de 5K3MBD1 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |