|
|
ET9366のメーカーはEtek Microelectronicsです、この部品の機能は「Constant frequency charge pump DC/DC converter」です。 |
部品番号 | ET9366 |
| |
部品説明 | Constant frequency charge pump DC/DC converter | ||
メーカ | Etek Microelectronics | ||
ロゴ | |||
このページの下部にプレビューとET9366ダウンロード(pdfファイル)リンクがあります。 Total 1 pages
General Description
The ET9366 is a low noise, constant frequency charge pump DC/DC converter for white LED applications. The ET9366 is
capable of driving up to six channels of LEDs at preset 25mA per channel from a 2.5V to 6.0V input. The current sinks
may be operated individually parallel for driving higher current LEDs. Only one 0.47μF flying capacitors and two small
1μF capacitors (at Vcc and Vout) make this part ideally suited for small, batterypowered applications.
The serial digital input is used to enable, disable, and set current for each LED with 16 settings down to 1.5mA. Each
output of the ET9366 is equipped with builtin softstart circuitry prevents excessive inrush current during startup. A low
current shutdown feature disconnects the load from the input and reduces quiescent current to less than 1μA.
The ET9366 is available in a Pbfree, spacesaving 3.0×3.0mm 16pin QFN16 package.
Features
VIN Range: 2.5V to 6.0V
Fully Programmable Current with Single Wire——16 Current Levels
Drives up to Six Channels of LEDs
Overcurrent and Overtemperature Protected
No Inductors, Low Noise Operation
Small Application Circuit
Automatic Soft Start
I Q <1μA in Shutdown
Undervoltage Lockout with Hysteresis
Package:3.0×3.0mm QFN16
Applications
Cell Phone/Smart Phone/PDA
Mp3/Mp4/PMP
White LED Backlighting
Pin Configuration
1 Page | |||
ページ | 合計 : 1 ページ | ||
|
PDF ダウンロード | [ ET9366 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
ET9364 | High performance white LED driver | Etek Microelectronics |
ET9366 | Constant frequency charge pump DC/DC converter | Etek Microelectronics |