|
|
Número de pieza | UTT1E470MDD | |
Descripción | Aluminum Electrolytic Capacitor | |
Fabricantes | Nichicon | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de UTT1E470MDD (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! ALUMINUM ELECTROLYTIC CAPACITORS
TT Miniature Sized, Low Impedance,
High Reliability For Switching Power Supplies
series
Smaller case size and Long Life product.
Compliant to the RoHS directive (2002/95/EC).
PW
Long Life
TT
Approved by Reliability Center for Electronic
Component, Japan-Certification No. RCJ-03-23C
Specifications
ltem Performance Characteristics
Category Temperature Range – 40 to +105˚C
Rated Voltage Range
6.3 to 50V
Rated Capacitance Range 1 to 470µF
Capacitance Tolerance
Leakage Current
± 20% at 120Hz, 20˚C
After 2 minutes' application of rated voltage, leakage current is less than 0.03CV or 3 (µA), whichever is greater.
Tangent of loss angle (tan δ) Rated voltage (V)
tan δ (MAX.)
6.3
0.30
10
0.28
16
0.24
Measurement frequency : 120Hz, Temperature : 20°C
25 35 50
0.18
0.16
0.14
Measurement frequency : 120Hz
Rated voltage (V)
6.3 10 16 25 35 50
Stability at Low Temperature Impedance ratio
Z– 25°C / Z+20°C
5
4
3
3
3
3
ZT / Z20 (MAX.) Z– 40°C / Z+20°C
10
10
8
6
4
4
Endurance
The specifications listed at right shall be met when the
capacitors are restored to 20˚C after the rated voltage is
applied for 5000 hours at 105˚C.
Capacitance change Within ±30% of the initial capacitance value
tan δ
300% or less than the initial specified value
Leakage current
Less than or equal to the initial specified value
Shelf Life
After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Marking
Printed with white color letter on dark blown sleeve.
Radial Lead Type
Sleeve (P.E.T.)
φd
L+ MAX.
Pressure relief vent
(φ8up)
(L = 7) 1.0
(L 9) 1.5
15MIN
4MIN
φD 4
(mm)
5 6.3 8
P 1.5 2.0 2.5
φd
0.45
0.45
0.5
(0.45)
( ) : Applied to 7mmL products
3.5
0.6
• Please refer to page 20 about the end seal configulation.
Type numbering system (Example : 25V 100µF)
1 2 3 4 5 6 7 8 9 10 11
UTT 1E 1 0 1 M PD
Configuration
φD
Pb-free leadwire
Pb-free PET sleeve
4
5 DD
6.3
8 PD
Configuration
Capacitance tolerance (± 20%)
Rated capacitance (100µF)
Rated voltage (25V)
Series name
Type
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
CAT.8100Z
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet UTT1E470MDD.PDF ] |
Número de pieza | Descripción | Fabricantes |
UTT1E470MDD | Aluminum Electrolytic Capacitor | Nichicon |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |