|
|
HSD190ME13-A03のメーカーはHannStarです、この部品の機能は「Display Module」です。 |
部品番号 | HSD190ME13-A03 |
| |
部品説明 | Display Module | ||
メーカ | HannStar | ||
ロゴ | |||
このページの下部にプレビューとHSD190ME13-A03ダウンロード(pdfファイル)リンクがあります。 Total 28 pages
WWW.LCDSPEC.NET
Document Title
Document No.
HannStar Display Corp.
HSD190ME13- A Product Information
Page No.
Revision
1 / 28
1.0
Hannstar Product Information
Model : HSD190ME13
- A03
Note: 1. Please contact HannStar Display Corp. before designing your product based on this module
specification.
2. The information contained herein is presented merely to indicate the characteristics and performance
of our products. No responsibility is assumed by HannStar for any intellectual property claims or other
problems that may result from application based on the module described herein.
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
1 Page WWW.LCDSPEC.NET
Document Title
Document No.
HannStar Display Corp.
HSD190ME13- A Product Information
Page No.
Revision
3 / 28
1.0
Contents
1.0 General descriptions ……………………………….…
2.0 Absolute maximum ratings …………………………..
3.0 Optical characteristics ………………………………..
4.0 Block diagram …………………………………………
5.0 I/O Connection Pin assignment ………………………..
6.0 Electrical Characteristics ………………….………….
7.0 Input Timing Spec………………………………………….
8.0 Outline dimension …………………………….………
9.0 Lot Mark ………………………………………………..
10.0 Package Specification …………………………….……
11.0 General precaution …………………………………..
p.4
p.5
p.7
p.12
p.15
p.16
p.21
p.22
p.24
p.25
p.27
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
3Pages WWW.LCDSPEC.NET
Document Title
Document No.
HannStar Display Corp.
HSD190ME13- A Product Information
Page No.
Revision
6 / 28
1.0
(2) 5-500-5Hz sine wave, X,Y,Z each directions, 30 min/cycle.
(3) 11ms, ±X, ±Y, ±Z direction, one time each. For this shock test,
It is necessary to fill the silicon rubber between the shock jig as buffer.
(4) Max wet bulb temp. =39oC
(5) 2 hrs. (10000 feet)
(6) 24hrs. (50000 feet)
2.2 Electrical Absolute Rating:
2.2.1 TFT LCD Module:
Item
Symbol
Power supply Voltage
VDD
Min.
-0.3
Max.
5.5
Unit.
V(DC)
Note
(1)(2)
2.2.2 Back Light Unit:
Item Symbol Min. Max. Unit Note
Lamp current
IL 3.5 9.0 mA (1)(2)(3)
Lamp frequency fL 40 80 KHz (1)(2)(3)
Note: (1) Permanent damage may occur to the LCD module if beyond this specification.
Functional operation should be restricted to the conditions described under
Normal Operating Conditions.
(2) To exceed 6.5mA, life time accelerate drop down and if to exceed 9.0mA has
safety problem. If current lower than 3.5 mA, CCFL would be unstable or
damaged.
(3) Within Ta=25±2°C
The information contained in this document is the exclusive property of HannStar Display Corporation. It shall not
be disclosed, distributed or reproduced in whole or in part without written permission of HannStar Display
Corporation.
6 Page | |||
ページ | 合計 : 28 ページ | ||
|
PDF ダウンロード | [ HSD190ME13-A03 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
HSD190ME13-A02 | Display Module | HannStar |
HSD190ME13-A03 | Display Module | HannStar |