|
|
UPT2D101MHDのメーカーはNichiconです、この部品の機能は「Aluminum Electrolytic Capacitor」です。 |
部品番号 | UPT2D101MHD |
| |
部品説明 | Aluminum Electrolytic Capacitor | ||
メーカ | Nichicon | ||
ロゴ | |||
このページの下部にプレビューとUPT2D101MHDダウンロード(pdfファイル)リンクがあります。 Total 2 pages
ALUMINUM ELECTROLYTIC CAPACITORS
PT Miniature Sized, High Ripple Current, Long Life
series
High ripple current.
Suited for ballast application.
Compliant to the RoHS directive (2002/95/EC).
PB
Smaller
PT
Smaller
Specifications
PZ
Item
Performance Characteristics
Category Temperature Range
– 25 to +105°C
Rated Voltage Range
200 to 450V
Rated Capacitance Range 15 to 820µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Leakage Current
After 2 minutes' application of rated voltage, leakage current is not more than 0.06CV+10 (µA)
Tangent of loss angle (tan δ)
Rated voltage (V)
tan δ (MAX.)
Measurement frequency : 120Hz, Temperature : 20°C
200 220 250 400 420 450
0.12 0.12 0.12 0.15 0.20 0.20
Stability at Low Temperature
Rated voltage (V)
Impedance ratio ZT / Z20 (MAX.)
Z– 25°C / Z+20°C
Measurement frequency : 120Hz
200 220 250 400 420 450
333888
Endurance
Shelf Life
Marking
The specifications listed at right shall be met when the
capacitors are restored to 20°C after D.C. bias plus rated
ripple current is applied for 5000 hours at 105°C, the peak
voltage shall not exceed the rated voltage.
Capacitance change
tan δ
Leakage current
Within ± 20% of the initial capacitance value
200% or less than the initial specified value
Less than or equal to the initial specified value
After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C
5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with white color letter on dark brown sleeve.
Radial Lead Type
Sleeve (P.E.T.)
φd
Pressure
relief vent
L + MAX.
15 MIN
4 MIN
(mm)
φD 10 12.5 16 18 20 22 25
P 5.0 5.0 7.5 7.5 10.0 10.0 12.5
φd 0.6 0.6 0.8 0.8 1.0 1.0 1.0
0.5 0.5 0.5 0.5 0.5 1.0 1.0
In case L > 25 for the φ12.5 dia. unit, lead dia. φ d = 0.8mm.
(φD < 20) : 1 .5
(φD 20) : 2 .0
• Please refer to page 20 about the end seal configulation.
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
Type numbering system (Example : 250V 220µF)
1 2 3 4 5 6 7 8 9 10 11 12
U PT 2 E 2 2 1 M HD T
Size code
Configuration
Capacitance tolerance (± 20%)
Rated capacitance (220µF)
Rated voltage (250V)
Series name
Type
Configuration
φD
Pb-free leadwire
Pb-free PET sleeve
10 PD
12.5 to 18
HD
20 to 25
RD
CAT.8100Z
1 Page | |||
ページ | 合計 : 2 ページ | ||
|
PDF ダウンロード | [ UPT2D101MHD データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
UPT2D101MHD | Aluminum Electrolytic Capacitor | Nichicon |
UPT2D101MHD | Aluminum Electrolytic Capacitor | Nichicon |