DataSheet.jp

UPJ1A222MPD PDF Data sheet ( 特性 )

部品番号 UPJ1A222MPD
部品説明 ALUMINUM ELECTROLYTIC CAPACITORS
メーカ Nichicon
ロゴ Nichicon ロゴ 



Total 7 pages
		

No Preview Available !

UPJ1A222MPD Datasheet, UPJ1A222MPD PDF,ピン配置, 機能
ALUMINUM ELECTROLYTIC CAPACITORS
PJ Low Impedance, For Switching Power Supplies
series
Low impedance and high reliability withstanding 5000 hours load life
at +105˚C (3000 / 2000 hours for smaller case sizes as specified below).
Capacitance ranges available based on the numerical values in E12 series under JIS.
Ideally suited for use of switching power supplies.
Compliant to the RoHS directive (2011/65/EU).
PJ
Smaller
Specifications
PS
Item
Performance Characteristics
Category Temperature Range – 55 to +105˚C (6.3 to 100V), – 40 to +105˚C (160 to 400V), – 25 to +105˚C (450V)
Rated Voltage Range
6.3 to 450V
Rated Capacitance Range 0.47 to 15000µF
Capacitance Tolerance
± 20% at 120Hz, 20˚C
Rated Voltage (V)
6.3 to 100
160 to 450
Leakage Current
Leakage current
After 1 minute's application of rated voltage, leakage current is not more CV =< 1000 : I = 0.1CV+40 (µA) max. (1 minute's)
than 0.03CV or 4 (µA), whichever is greater.
CV > 1000 : I = 0.04CV+100 (µA) max. (1 minute's)
120Hz, 20˚C
Tangent of loss angle (tan δ) Rated Voltage (V)
tan δ (MAX.)
6.3
0.22
10
0.19
16
0.16
25
0.14
35
0.12
50
0.10
63 to 100 160 to 350 400 450
0.08
0.20
0.25
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF.
Rated voltage (V)
6.3 10 16 25 35 50 to 100 160 200 250 315 350 400
Stability at Low Temperature Impedance
Z– 25˚C / Z+20˚C
ratio (MAX.)
Z– 40˚C / Z+20˚C
4
6
8 10
Z– 55˚C / Z+20˚C
4
3
3
2 ————
450 120Hz
15
Endurance
Shelf Life
Marking
The specifications listed at right shall be met when the
capacitors are restored to 20˚C after D.C. bias plus rated ripple
current is applied for 5000 hours (2000 hours for φD=5 and 6.3,
3000 hours for φD=8) at 105˚C, the peak voltage shall not
exceed the rated voltage.
After storing the capacitors under no load at 105˚C for 1000
hours and then performing voltage treatment based on JIS C
5101-4 clause 4.1 at 20°C, they shall meet the specified
values for the endurance characteristics listed above.
Printed with white color letter on dark brown sleeve.
Capacitance change Within ±20% of the initial capacitance value
tan δ
200% or less than the initial specified value
Leakage current
Less than or equal to the initial specified value
Capacitance change Within ±20% of the initial capacitance value
tan δ
150% or less than the initial specified value
Leakage current
Less than or equal to the initial specified value
Radial Lead Type
Type numbering system (Example : 25V 470µF)
Sleeve (P.E.T.)
φd
Pressure
relief vent
(φ6.3up)
L+ MAX.
15MIN
4MIN
1 2 3 4 5 6 7 8 9 10 11 12
UP J 1 E 4 7 1 MPD
Configuration
Capacitance tolerance (±20%)
Rated capacitance (470µF)
Rated voltage (25V)
Series name
Type
Type
Small Dia
Low Profile
Code
6
Size code
Configuration
φD
Pb-free leadwire
Pb-free PET sleeve
5 DD
6.3 ED
8 10
PD
12.5 to 18
HD
(φD < 10) 1.0
(φD 10) 1.5
(mm)
φD 5 6.3 8 10 12.5 16 18
P 2.0 2.5 3.5 5.0 5.0 7.5 7.5
φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8
In case L >25 for the φ12.5 dia. unit, lead dia. φ d=0.8mm.
Rated voltage
Frequency coefficient
of rated ripple current
Rated voltage
Please refer to page 20 about the end seal configuration.
6.3 to 100V
(10kHz to
200kHz = 1)
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
Dimension table in next pages.
160 to 450V
Frequency coefficient
15000
1001050000
681000000
47060800
4700
3300
3300
22020200
15010500
10010000
680
680
470
470330
220
150
100
68
47
33
22
15
10
0.68
0.47
0
Frequency coefficient
120Hz
300Hz
1kHz
0.5 0.6 0.7 0.8
Frequency coefficient
0.9
1.0
50Hz
0.80
120Hz
1.00
300Hz
1.25
1kHz
1.40
10kHz or more
1.60
CAT.8100C

1 Page





ページ 合計 : 7 ページ
PDF
ダウンロード
[ UPJ1A222MPD.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
UPJ1A222MPD

ALUMINUM ELECTROLYTIC CAPACITORS

Nichicon
Nichicon

www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap