DataSheet.jp

ACS770KCB-150B-PSF-T の電気的特性と機能

ACS770KCB-150B-PSF-TのメーカーはAllegro MicroSystemsです、この部品の機能は「High Precision Linear Current Sensor IC」です。


製品の詳細 ( Datasheet PDF )

部品番号 ACS770KCB-150B-PSF-T
部品説明 High Precision Linear Current Sensor IC
メーカ Allegro MicroSystems
ロゴ Allegro MicroSystems ロゴ 




このページの下部にプレビューとACS770KCB-150B-PSF-Tダウンロード(pdfファイル)リンクがあります。

Total 30 pages

No Preview Available !

ACS770KCB-150B-PSF-T Datasheet, ACS770KCB-150B-PSF-T PDF,ピン配置, 機能
ACS770xCB
Thermally Enhanced, Fully Integrated, Hall Effect-Based
High Precision Linear Current Sensor IC with 100 μΩ Current Conductor
Features and Benefits
Industry-leading total output accuracy achieved with new
piecewise linear digital temperature compensation of
offset and sensitivity
Industry-leading noise performance through proprietary
amplifier and filter design techniques
120 kHz typical bandwidth
4.1 μs output rise time in response to step input current
Integrated shield greatly reduces capacitive coupling from
current conductor to die due to high dV/dt signals, and
prevents offset drift in high-side, high voltage applications
Greatly improved total output error through digitally
programmed and compensated gain and offset over the full
operating temperature range
Small package size, with easy mounting capability
Monolithic Hall IC for high reliability
Ultra-low power loss: 100 μΩ internal conductor resistance
Galvanic isolation allows use in economical, high-side
current sensing in high voltage systems
4.5 to 5.5 V, single supply operation
Output voltage proportional to AC or DC currents
Factory-trimmed for accuracy
Extremely stable output offset voltage
Undervoltage lockout for VCC below specification
AEC Q-100 automotive qualified
UL certified, File No. E316429
Package: 5-pin package (suffix CB)
Tytpeested
PFF
Leadform
PSF
Leadform
TÜV America
Certificate Number:
U8V 13 08 54214 027
Additional leadforms available for qualifying volumes
Description
The AllegroACS770 family of current sensor ICs provides
economical and precise solutions forAC or DC current sensing.
Typical applications include motor control, load detection and
management, power supply and DC-to-DC converter control,
inverter control, and overcurrent fault detection.
The device consists of a precision, low-offset linear Hall
circuit with a copper conduction path located near the die.
Applied current flowing through this copper conduction
path generates a magnetic field that is concentrated by a low
magnetic hysteresis core, then converted by the Hall IC into a
proportional voltage. Device accuracy is optimized through the
close proximity of the magnetic signal to the Hall transducer.
A precise, proportional output voltage is provided by the
low-offset, chopper-stabilized BiCMOS Hall IC, which is
programmed for accuracy at the factory. Proprietary digital
temperature compensation technology greatly improves the
IC accuracy and temperature stability without influencing the
high bandwidth operation of the analog output.
High level immunity to current conductor dV/dt and stray
electric fields is offered byAllegro proprietary integrated shield
technology for low output voltage ripple and low offset drift
in high-side, high voltage applications.
The output of the device has a positive slope (>VCC/2 for
bidirectional devices) when an increasing current flows through
the primary copper conduction path (from terminal 4 to terminal
5), which is the path used for current sampling. The internal
resistance of this conductive path is 100 μΩ typical, providing
low power loss.
The thickness of the copper conductor allows survival of the
device at high overcurrent conditions. The terminals of the
Continued on the next page…
Typical Application
Application 1. The ACS770 outputs an analog signal,
VOUT, that varies linearly with the bidirectional AC or DC
primary sampled current, IP, within the range specified.
RF and CF are for optimal noise management, with
values that depend on the application.
4 IP+
VCC 1
ACS770
IP GND 2
5
IP– VIOUT 3
5V
CBYP
0.1 μF
CF
RF
VOUT
ACS770-DS

1 Page





ACS770KCB-150B-PSF-T pdf, ピン配列
ACS770xCB
Thermally Enhanced, Fully Integrated, Hall Effect-Based
High Precision Linear Current Sensor IC with 100 μΩ Current Conductor
Absolute Maximum Ratings
Characteristic
Forward Supply Voltage
Reverse Supply Voltage
Forward Output Voltage
Reverse Output Voltage
Output Source Current
Output Sink Current
Nominal Operating Ambient Temperature
Maximum Junction
Storage Temperature
Symbol
VCC
VRCC
VIOUT
VRIOUT
IOUT(Source)
IOUT(Sink)
TOP
TJ(max)
Tstg
Notes
VIOUT to GND
Minimum pull-up resistor of 500 Ω, from VCC to
VIOUT
Range E
Range K
Range L
Rating
6
–0.1
25
–0.1
2.8
10
–40 to 85
–40 to 125
–40 to 150
165
–65 to 165
Unit
V
V
V
V
mA
mA
ºC
ºC
ºC
ºC
ºC
Isolation Characteristics
Characteristic
Dielectric Strength Test Voltage*
Symbol
VISO
Notes
Agency type-tested for 60 seconds per
UL standard 60950-1, 2nd Edition
Rating
4800
Unit
VAC
Working Voltage for Basic Isolation
VWFSI
For basic (single) isolation per UL standard
60950-1, 2nd Edition
990 VDC or Vpk
700 Vrms
Working Voltage for Reinforced Isolation
VWFRI
For reinforced (double) isolation per UL standard
60950-1, 2nd Edition
636
450
VDC or Vpk
Vrms
*60-second testing is only done during the UL certification process. In production, Allegro conducts 1-second isolation testing according to UL
60950-1, 2nd Edition.
Allegro MicroSystems, LLC
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
3


3Pages


ACS770KCB-150B-PSF-T 電子部品, 半導体
ACS770xCB
Thermally Enhanced, Fully Integrated, Hall Effect-Based
High Precision Linear Current Sensor IC with 100 μΩ Current Conductor
COMMON OPERATING CHARACTERISTICS valid at TOP = –40°C to 150°C, CBYP = 0.1 μF, and VCC = 5 V, unless otherwise specified
Characteristic
Symbol
Test Conditions
Min. Typ. Max. Unit
Supply Voltage
Supply Current
Supply Zener Voltage
Power-On Delay1,2
Temperature Compensation
Power-On Time1
VCC
ICC
VZ
tPOD
tTC
Output open
TA = 25°C, ICC = 30 mA
TA = 25°C, CBYP = open
TA = 25°C, CBYP = open
4.5 5.0 5.5
V
– 10 15 mA
6.5 7.5
V
– 90 – μs
– 90 – μs
Undervoltage Lockout (UVLO)
Threshold1
VUVLOH
VUVLOL
TA = 25°C, VCC rising
TA = 25°C, VCC falling
– 3.8 –
–3–
UVLO Enable/Disable Delay
Time1,2
tUVLOE
TA = 25°C, CBYP = open, VCC Fall Time (5 V to 3 V) = 1 μs
75
tUVLOD
TA = 25°C, CBYP = Open,
VCC Recover Time (3 V to 5 V) = 1 μs
14
Power-On Reset Voltage1
VPORH
VPORL
TA = 25°C, VCC rising
TA = 25°C, VCC falling
–4–
– 2.7 –
Rise Time1,2
Propagation Delay Time1,2
Response Time1,2
tr
IP step = 60% of IP+, 10% to 90% rise time, TA = 25°C,
CL = 0.47 nF
– 4.1 –
tPROP
IP step = 60% of IP+, 20% input to 20% output, TA = 25°C,
CL = 0.47 nF
2.4
tRESPONSE
IP step = 60% of IP+, 80% input to 80% output, TA = 25°C,
COUT = 0.47 nF
4.6
Internal Bandwidth
BWi –3 dB; TA = 25°C, CL = 0.47 nF
– 120 –
Output Load Resistance
RL VIOUT to GND
4.7 –
Output Load Capacitance
CL VIOUT to GND
– – 10
Primary Conductor Resistance
RPRIMARY
TA = 25°C
– 100 –
Quiescent Output Voltage1
Ratiometry1
VIOUT(QBI)
VIOUT(QUNI)
VRAT
Bidirectional variant, IP = 0 A, TA = 25°C
Unidirectional variant, IP = 0 A, TA = 25°C
VCC = 4.5 to 5.5 V
– VCC/2 –
– 0.5 –
– 100 –
1See Characteristic Definitions section of this datasheet.
2See Timing Data Section of this data sheet
V
V
μs
μs
V
V
μs
μs
μs
kHz
kΩ
nF
μΩ
V
V
%
Allegro MicroSystems, LLC
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
6

6 Page



ページ 合計 : 30 ページ
 
PDF
ダウンロード
[ ACS770KCB-150B-PSF-T データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
ACS770KCB-150B-PSF-T

High Precision Linear Current Sensor IC

Allegro MicroSystems
Allegro MicroSystems


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap