DataSheet.jp

DM74S139 の電気的特性と機能

DM74S139のメーカーはFairchild Semiconductorです、この部品の機能は「Decoder/Demultiplexer」です。


製品の詳細 ( Datasheet PDF )

部品番号 DM74S139
部品説明 Decoder/Demultiplexer
メーカ Fairchild Semiconductor
ロゴ Fairchild Semiconductor ロゴ 




このページの下部にプレビューとDM74S139ダウンロード(pdfファイル)リンクがあります。

Total 5 pages

No Preview Available !

DM74S139 Datasheet, DM74S139 PDF,ピン配置, 機能
August 1986
Revised April 2000
DM74S138 DM74S139
Decoder/Demultiplexer
General Description
These Schottky-clamped circuits are designed to be used
in high-performance memory-decoding or data-routing
applications, requiring very short propagation delay times.
In high-performance memory systems these decoders can
be used to minimize the effects of system decoding. When
used with high-speed memories, the delay times of these
decoders are usually less than the typical access time of
the memory. This means that the effective system delay
introduced by the decoder is negligible.
The DM74S138 decodes one-of-eight lines, based upon
the conditions at the three binary select inputs and the
three enable inputs. Two active-LOW and one active-HIGH
enable inputs reduce the need for external gates or invert-
ers when expanding. A 24-line decoder can be imple-
mented with no external inverters, and a 32-line decoder
requires only one inverter. An enable input can be used as
a data input for demultiplexing applications.
The DM74S139 comprises two separate two-line-to-four-
line decoders in a single package. The active-LOW enable
input can be used as a data line in demultiplexing applica-
tions.
All of these decoders/demultiplexers feature fully buffered
inputs, presenting only one normalized load to its driving
circuit. All inputs are clamped with high-performance
Schottky diodes to suppress line-ringing and simplify sys-
tem design.
Features
s Designed specifically for high speed:
Memory decoders
Data transmission systems
s DM74S138 3-to-8-line decoders incorporates 3 enable
inputs to simplify cascading and/or data reception
s DM74S139 contains two fully independent 2-to-4-line
decoders/demultiplexers
s Schottky clamped for high performance
s Typical propagation delay time (3 levels of logic)
DM74S138 8 ns
DM74S139 7.5 ns
s Typical power dissipation
DM74S138 245 mW
DM74S139 300 mW
Ordering Code:
Order Number
DM74S138N
DM74S139N
Package Number
Package Description
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
N16E
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
© 2000 Fairchild Semiconductor Corporation DS006466
www.fairchildsemi.com

1 Page





DM74S139 pdf, ピン配列
Absolute Maximum Ratings(Note 1)
Supply Voltage
7V
Input Voltage
5.5V
Operating Free Air Temperature Range
0° C to +70°C
Storage Temperature Range
65° C to +150° C
Note 1: The Absolute Maximum Ratingsare those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum ratings.
The Recommended Operating Conditionstable will define the conditions
for actual device operation.
Recommended Operating Conditions
Symbol
VCC
VIH
VIL
IOH
IOL
TA
Parameter
Supply Voltage
HIGH Level Input Voltage
LOW Level Input Voltage
HIGH Level Output Current
LOW Level Output Current
Free Air Operating Temperature
Min Nom
4.75 5
2
0
Electrical Characteristics
over recommended operating free air temperature (unless otherwise noted)
Symbol
Parameter
Conditions
Min
VI Input Clamp Voltage
VCC = Min, II = −18 mA
VOH HIGH Level
Output Voltage
VOL LOW Level
VCC = Min, IOH = Max
VIL = Max, VIH = Min
VCC = Min, IOL = Max
2.7
Output Voltage
II Input Current @ Max Input Voltage
IIH HIGH Level Input Current
IIL LOW Level Input Current
IOS Short Circuit Output Current
ICC Supply Current (DM74S138)
ICC Supply Current (DM74S139)
Note 2: All typicals are at VCC = 5V, TA = 25°C.
VIH = Min, VIL = Max
VCC = Max, VI = 5.5V
VCC = Max, VI = 2.7V
VCC = Max, VI = 0.5V
VCC = Max (Note 3)
VCC = Max (Note 4)
VCC = Max (Note 4)
40
Note 3: Not more than one output should be shorted at a time, and the duration should not exceed one second.
Note 4: ICC is measured with all outputs enabled and OPEN.
Max
5.25
0.8
1
20
70
Units
V
V
V
mA
mA
°C
Typ
(Note 2)
3.4
49
60
Max
1.2
0.5
1
50
2
100
74
90
Units
V
V
V
mA
µA
mA
mA
mA
mA
3 www.fairchildsemi.com


3Pages





ページ 合計 : 5 ページ
 
PDF
ダウンロード
[ DM74S139 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
DM74S132

Quad 2-Input Schmitt Trigger NAND Gate

National Semiconductor
National Semiconductor
DM74S133

13-Input NAND Gate

Fairchild Semiconductor
Fairchild Semiconductor
DM74S138

Decoder/Demultiplexer

Fairchild Semiconductor
Fairchild Semiconductor
DM74S139

Decoder/Demultiplexer

Fairchild Semiconductor
Fairchild Semiconductor


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap