DataSheet.jp

UHC1E102MPD PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 UHC1E102MPD
部品説明 ALUMINUM ELECTROLYTIC CAPACITORS
メーカ Nichicon
ロゴ Nichicon ロゴ 



Total 2 pages
		

No Preview Available !

UHC1E102MPD Datasheet, UHC1E102MPD PDF,ピン配置, 機能
ALUMINUM ELECTROLYTIC CAPACITORS
HC Low Impedance
series
Lower impedance than HD series.
Compliant to the RoHS directive (2002/95/EC).
Products which are scheduled to be discontinued.
Not recommended for new designs
HC
Low
Impedance
HD
Approved by Reliability Center for Electronic
Component, Japan-Certification No. RCJ-03-23C
Specifications
ltem Performance Characteristics
Category Temperature Range 40 to +105˚C
Rated Voltage Range
6.3 to 35V
Rated Capacitance Range 4.7 to 1000µF
Capacitance Tolerance
Leakage Current
± 20% at 120Hz, 20˚C
After 2 minutes' application of rated voltage, leakage current is less than 0.01CV or 3 (µA), whichever is greater.
Tangent of loss angle (tan δ)
Rated voltage (V)
tan δ (MAX.)
6.3
0.15
10
0.13
16
0.12
25
0.10
35
0.10
120Hz 20˚C
Rated voltage (V) 6.3 10 16 25 35 120Hz
Stability at Low Temperature
Impedance ratio ZT / Z20 (MAX.) Z40˚C / Z+20˚C
2
2
2
2
2
Endurance
The specifications listed at right shall be met when the
capacitors are restored to 20˚C after D.C. bias plus
rated ripple current is applied for 2000 hours (1000
hours for φD=4, 5 and 6.3) at 105˚C, the peak voltage
shall not exceed the rated voltage.
Capacitance change
tan δ
Leakage current
Within ± 20% of the initial capacitance value
200% or less than the initial specified value
Less than or equal to the initial specified value
Marking
Printed with white color letter on black sleeve.
Radial Lead Type
Sleeve (P.E.T.)
φd
Pressure
relief vent
(φ6.3up)
L+ MAX.
15MIN
(No pressure relief vent for 7mmL products)
4MIN
(L = 7) 1.0
(L 11) 1.5
φD 4 5 6.3 8
P 1.5 2.0 2.5
φd
0.45
0.45
0.5
(0.45)
( ) : Applied to 7mmL products
3.5
0.6
(mm)
10
5.0
0.6
Please refer to page 20 about the end seal configulation.
Type numbering system (Example : 10V 470µF)
1 2 3 4 5 6 7 8 9 10 11
UHC 1 A 4 7 1 M PD
Configuration
φD
4
5
6.3 (7L)
Pb-free leadwire
Pb-free PET sleeve
DD
6.3 (11L)
ED
8 · 10
PD
Configuration
Capacitance tolerance (± 20%)
Rated capacitance (470µF)
Rated voltage (10V)
Series name
Type
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
CAT.8100Z

1 Page





ページ 合計 : 2 ページ
PDF
ダウンロード
[ UHC1E102MPD.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
UHC1E102MPD

ALUMINUM ELECTROLYTIC CAPACITORS

Nichicon
Nichicon

www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap