|
|
PDF MDO3000 Data sheet ( Hoja de datos )
| Número de pieza | MDO3000 | |
| Descripción | Mixed Domain Oscilloscopes | |
| Fabricantes | Tektronix | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MDO3000 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
Mixed Domain Oscilloscopes
MDO3000 Series Datasheet
Logic Analyzer (Optional)
16 digital channels
10 M record length on all channels
121.2 ps timing resolution
Protocol Analyzer (Optional)
Serial bus support for I2C, SPI, RS-232/422/485/UART, USB 2.0,
CAN, LIN, FlexRay, MIL-STD-1553, and Audio standards
Digital Voltmeter (Free with product registration)
4-digit AC RMS, DC, and AC+DC RMS voltage measurements
5-digit frequency measurements
Today's integrated designs need an oscilloscope that is just as integrated -
such as the MDO3000 Mixed Domain Oscilloscope (MDO) Series. It is the
ultimate 6-in-1 integrated oscilloscope that includes an integrated spectrum
analyzer, arbitrary function generator, logic analyzer, protocol analyzer, and
digital voltmeter/counter. The MDO3000 is completely customizable and
fully upgradeable. Add the instruments and performance you need now - or
later.
Key performance specifications
Oscilloscope
2 and 4 analog channel models
1 GHz, 500 MHz, 350 MHz, 200 MHz, 100 MHz bandwidth models
Bandwidth is upgradable (up to 1 GHz)
Up to 5 GS/s sample rate
10 M record length on all channels
>280,000 wfm/s maximum waveform capture rate
Standard passive voltage probes with 3.9 pF capacitive loading
and 1 GHz, 500 MHz, or 250 MHz analog bandwidth
Spectrum Analyzer
Frequency range
Standard: 9 kHz - oscilloscope bandwidth
Optional: 9 kHz - 3 GHz
Ultra-wide capture bandwidth up to 3 GHz
Arbitrary Function Generator (Optional)
13 predefined waveform types
50 MHz waveform generation
128 k arbitrary generator record length
250 MS/s arbitrary generator sample rate
Key features
FastAcq™ high-speed waveform capture rate finds elusive signal
anomalies quickly
Wave Inspector® Controls provide easy navigation and automated
search of waveform data
33 automated measurements and waveform histograms for simplified
waveform analysis
TekVPI® probe interface directly supports active, differential, and
current probes for automatic scaling and units
9 in. (229 mm) WVGA widescreen color display
Small footprint and lightweight – Only 5.8 in. (147 mm) deep and 9.2 lb.
(4.2 kg)
Spectral Analysis
Dedicated front-panel controls for commonly performed tasks
Automated peak markers identify frequency and amplitude of
spectrum peaks
Manual markers enable non-peak measurements
Trace types include: Normal, Average, Max Hold, and Min Hold
Spectrogram display enables easy observation and insight into
slowly changing RF phenomena
Automated measurements include: Channel Power, Adjacent
Channel Power Ratio (ACPR), and Occupied Bandwidth (OBW)
Arbitrary Function Generation
Generate predefined signals to quickly simulate missing devices in
designs
Capture signals on analog or digital inputs, transfer to the arbitrary
edit memory, and replicate out from the AFG
Add noise to any signal to easily perform margin testing
www.tektronix.com 1
1 page  
Mixed Domain Osciloscopes -- MDO3000 Series
Waveform histogram of a rising edge showing the distribution of edge position (jitter) over
time. Included are numeric measurements made on the waveform histogram data.
Video design and development
Many video engineers have remained loyal to analog oscilloscopes,
believing the intensity gradations on an analog display are the only way to
see certain video waveform details. The fast waveform capture rate of the
MDO3000, coupled with its intensity-graded view of the signal, provides the
same information-rich display as an analog oscilloscope, but with much
more detail and all the benefits of digital scopes.
Standard features such as IRE and mV graticules, holdoff by fields, video
polarity, HDTV and custom (nonstandard) video triggers, and an Autoset
smart enough to detect video signals, make these the easiest to use
oscilloscopes on the market for video applications. And with high
bandwidth, four analog inputs, and a built-in 75 Ω input termination (not
available on 1 GHz models), the oscilloscope provides ample performance
for analog and digital video use. There is even a video picture mode
enabling you to see the picture of the video signal you are viewing – for
NTSC and PAL signals.
Viewing an NTSC full color bar signal image. Video picture mode contains automatic
contrast and brightness settings as well as manual controls.
Power analysis (optional)
Ever increasing consumer demands for longer battery-life devices and for
green solutions that consume less power require power-supply designers to
characterize and minimize switching losses to improve efficiency. In
addition, the supply’s power levels, output purity, and harmonic feedback
into the power line must be characterized to comply with national and
regional power quality standards. Historically, making these and many
other power measurements on an oscilloscope has been a long, manual,
and tedious process. The MDO3000’s optional power analysis tools greatly
simplify these tasks, enabling quick, repeatable and accurate analysis of
power quality, switching loss, harmonics, safe operating area (SOA),
modulation, ripple, and slew rate (di/dt, dv/dt). Completely integrated into
the oscilloscope, the power analysis tools provide automated, repeatable
power measurements with a touch of a button.
Viewing an NTSC video signal. Notice the intensity-graded view provided by the
MDO3000's ability to represent time, amplitude, and distribution over time.
Power Quality measurement table. Automated power measurements enable quick and
accurate analysis of common power parameters.
www.tektronix.com 5
5 Page 
Mixed Domain Osciloscopes -- MDO3000 Series
Serial Protocol Triggering and Analysis
(optional)
On a serial bus, a single signal often includes address, control, data, and
clock information. This can make isolating events of interest difficult.
Automatic trigger, decode, and search on bus events and conditions gives
you a robust set of tools for debugging serial buses.
The MagniVu high-resolution record provides 121.2 ps timing resolution, enabling you to
take critical timing measurements on your digital waveforms.
P6316 MSO probe
This unique probe design offers two eight-channel pods, simplifying the
process of connecting to the device-under-test. When connecting to square
pins, the P6316 can connect directly to 8×2 square pin headers spaced on
tenth-inch centers. When more attachment flexibility is required, you can
use the included flying lead sets and grabbers to clip onto surface mount
devices or test points. The P6316 offers outstanding electrical
characteristics applying only 8 pF of capacitive loading with 101 kΩ input
impedance.
The P6316 MSO probe offers two eight-channel pods to simplify connecting to your
device.
Triggering on a specific address and data packet going across an I2C bus. The yellow
waveform is clock and the blue waveform is the data. A bus waveform provides decoded
packet content including Start, Address, Read/Write, Data, and Stop.
Serial triggering
Trigger on packet content such as start of packet, specific addresses,
specific data content, unique identifiers, etc. on popular serial interfaces
such as I2C, SPI, RS-232/422/485/UART, USB2.0, CAN, LIN, FlexRay,
MIL-STD-1553, and I2S/LJ/RJ/TDM.
Bus display
Provides a higher-level, combined view of the individual signals (clock,
data, chip enable, etc.) that make up your bus, making it easy to identify
where packets begin and end and identifying sub-packet components such
as address, data, identifier, CRC, etc.
Bus decoding
Tired of having to visually inspect the waveform to count clocks, determine
if each bit is a 1 or a 0, combine bits into bytes, and determine the hex
value? Let the oscilloscope do it for you! Once you’ve set up a bus, the
MDO3000 Series will decode each packet on the bus, and display the value
in hex, binary, decimal (USB, LIN, FlexRay, and MIL-STD-1553 only),
signed decimal (I2S/LJ/RJ/TDM only), or ASCII (USB, MIL-STD-1553 and
RS-232/422/485/UART only) in the bus waveform.
www.tektronix.com 11
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet MDO3000.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MDO3000 | Mixed Domain Oscilloscopes | Tektronix |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |