DataSheet.jp

TL2FL-LW1L の電気的特性と機能

TL2FL-LW1LのメーカーはToshibaです、この部品の機能は「LED Lamps」です。


製品の詳細 ( Datasheet PDF )

部品番号 TL2FL-LW1L
部品説明 LED Lamps
メーカ Toshiba
ロゴ Toshiba ロゴ 




このページの下部にプレビューとTL2FL-LW1Lダウンロード(pdfファイル)リンクがあります。

Total 17 pages

No Preview Available !

TL2FL-LW1L Datasheet, TL2FL-LW1L PDF,ピン配置, 機能
LED Lamps InGaN and Phosphor
TL2FL-LW1,L
1. Applications
• General Lighting
2. Features
(1) Size: 3.0 (L) mm × 1.4 (W) mm × 0.67 (H) mm
(2) High luminous flux LED: 20.4 lm (typ.) @IF = 65 mA
(3) Color: White (color temperature: 3000 K (typ.))
(4) Operating temperature range: Topr = -40 to 100
(5) Reflow-soldering is available.
3. Packaging and Pin Assignment
4-1J1A
TL2FL-LW1,L
1: Cathode
2: Anode
Start of commercial production
2014-02
1 2014-02-12
Rev.2.0

1 Page





TL2FL-LW1L pdf, ピン配列
TL2FL-LW1,L
5. Handling Precautions
• This product is sensitive to electrostatic and care must be fully taken when handling products. Particularly
in the case that an overvoltage shall be applied, the overflowed energy may cause damage to or possibly
result in destruction of the product. Users shall take absolutely secure countermeasures against
electrostatic and surge when handling the product.
• A damage to the device might create a tiny leakage path, which causes the LED lamp not to light up in the
low-current region or causes a drop in the VF rise voltage.
Failure criterion: IF 0.5 mA @ VF = 2 V
• If multiple LEDs are connected in parallel, they will experience variations in the forward current due to
the characteristics differences in forward voltage. Ensure that the forward current of all the LEDs fall
within the intended range of the system design, for example, by inserting current-limiting resistors to each
LED string.
Circuit Example
• Since this product is intended to be used for display lighting, the measurement standard is based on the
spectral sensitivity of the human eye. It is not intended to be used for any applications other than display
lighting (e.g., sensors and light communications systems.)
• Generally, GaN-based LEDs exhibit instability or significant device-to-device variations in the relative
luminous flux in the low-current region. To avoid these problems, an application system should be
designed in such a manner that the GaN-based LEDs are driven with a forward current of 2 mA or higher.
• When the device is used in places that are likely to be exposed to condensation, salt or corrosive gas, the
effect on its performance and reliability must be thoroughly verified.
• Please note the handling of products during evaluation.
(1) Please do not apply pressure to the upper surface of the product with finger, tweezers, and others.
Failure of product to light up may occur due to package deformation, wire deformation and/or
disconnection.
(2) Should tweezers be used in product handling, one with flat surfaces is recommended.
(3) Please handle the product widthwise.
(4) Please do not drop the product. There is a possibility for package transformation etc. to occur when the
product is dropped.
(5) Please do not stack the printed circuit boards on which the product is mounted to prevent damages to
product surface. Also, please note not to damage the surface of the product with cushioning material
etc. Surface damage to the product may influence their optical characteristics.
(6) Solder, flux, paper or heat-sensitive materials that might be deformed or discolored at high
temperatures should not be left on the surface of an LED lamp.
3 2014-02-12
Rev.2.0


3Pages


TL2FL-LW1L 電子部品, 半導体
TL2FL-LW1,L
Table 7.1 Chromaticity Rank (Note)
Rank
Cx
Cy Rank Cx
Cy
7A1 0.4147
0.3814 7C1 0.4342
0.4028
0.4183
0.3898
0.4385
0.4119
0.4242
0.3919
0.4449
0.4141
0.4203
0.3833
0.4403
0.4049
7A2 0.4183
0.3898 7C2 0.4385
0.4119
0.4221
0.3984
0.4430
0.4212
0.4281
0.4006
0.4496
0.4236
0.4242
0.3919
0.4449
0.4141
7A3 0.4242
0.3919 7C3 0.4449
0.4141
0.4281
0.4006
0.4496
0.4236
0.4342
0.4028
0.4562
0.4260
0.4300
0.3939
0.4513
0.4164
7A4 0.4203
0.3833 7C4 0.4403
0.4049
0.4242
0.3919
0.4449
0.4141
0.4300
0.3939
0.4513
0.4164
0.4259
0.3853
0.4465
0.4071
7B1 0.4221
0.3984 7D1 0.4259
0.3853
0.4259
0.4073
0.4300
0.3939
0.4322
0.4096
0.4359
0.3960
0.4281
0.4006
0.4316
0.3873
7B2 0.4259
0.4073 7D2 0.4300
0.3939
0.4299
0.4165
0.4342
0.4028
0.4364
0.4188
0.4403
0.4049
0.4322
0.4096
0.4359
0.3960
7B3 0.4322
0.4096 7D3 0.4359
0.3960
0.4364
0.4188
0.4403
0.4049
0.4430
0.4212
0.4465
0.4071
0.4385
0.4119
0.4418
0.3981
7B4 0.4281
0.4006 7D4 0.4316
0.3873
0.4322
0.4096
0.4359
0.3960
0.4385
0.4119
0.4418
0.3981
0.4342
0.4028
0.4373
0.3893
Note: This LED lamp is sorted into chromaticity coordinate groups shown above. Each reel includes the same rank
LEDs. Let the delivery ratio of each rank be unquestioned.
6 2014-02-12
Rev.2.0

6 Page



ページ 合計 : 17 ページ
 
PDF
ダウンロード
[ TL2FL-LW1L データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
TL2FL-LW1

LED Lamps

Toshiba
Toshiba
TL2FL-LW1L

LED Lamps

Toshiba
Toshiba


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap