DataSheet.jp

TL3GB-WH1L の電気的特性と機能

TL3GB-WH1LのメーカーはToshibaです、この部品の機能は「LED Lamps」です。


製品の詳細 ( Datasheet PDF )

部品番号 TL3GB-WH1L
部品説明 LED Lamps
メーカ Toshiba
ロゴ Toshiba ロゴ 




このページの下部にプレビューとTL3GB-WH1Lダウンロード(pdfファイル)リンクがあります。

Total 16 pages

No Preview Available !

TL3GB-WH1L Datasheet, TL3GB-WH1L PDF,ピン配置, 機能
LED Lamps InGaN and Phosphor
TL3GB-WH1,L
1. Applications
• General Lighting
2. Features
(1) Size: 3.0 (L) mm × 3.0 (W) mm × 0.67 (H) mm
(2) High luminous flux LED: 66.3 lm (typ.) @IF = 100 mA
(3) Color: White (color temperature: 4000 K (typ.))
(4) Operating temperature range: Topr = -40 to 100
(5) Reflow-soldering is available.
3. Packaging and Pin Assignment
4-3AA1A
TL3GB-WH1,L
1: Cathode
2: Anode
Start of commercial production
2014-03
1 2014-08-19
Rev.2.0

1 Page





TL3GB-WH1L pdf, ピン配列
TL3GB-WH1,L
5. Handling Precautions
• This product is sensitive to electrostatic and care must be fully taken when handling products. Particularly
in the case that an overvoltage shall be applied, the overflowed energy may cause damage to or possibly
result in destruction of the product. Users shall take absolutely secure countermeasures against
electrostatic and surge when handling the product.
• A damage to the device might create a tiny leakage path, which causes the LED lamp not to light up in the
low-current region or causes a drop in the VF rise voltage.
Failure criterion: IF 0.5 mA @ VF = 4 V
• If multiple LEDs are connected in parallel, they will experience variations in the forward current due to
the characteristics differences in forward voltage. Ensure that the forward current of all the LEDs fall
within the intended range of the system design, for example, by inserting current-limiting resistors to each
LED string.
Circuit Example
• Since this product is intended to be used for display lighting, the measurement standard is based on the
spectral sensitivity of the human eye. It is not intended to be used for any applications other than display
lighting (e.g., sensors and light communications systems.)
• Generally, GaN-based LEDs exhibit instability or significant device-to-device variations in the relative
luminous flux in the low-current region. To avoid these problems, an application system should be
designed in such a manner that the GaN-based LEDs are driven with a forward current of 2 mA or higher.
• When the device is used in places that are likely to be exposed to condensation, salt or corrosive gas, the
effect on its performance and reliability must be thoroughly verified.
• Please note the handling of products during evaluation.
(1) Please do not apply pressure to the upper surface of the product with finger, tweezers, and others.
Failure of product to light up may occur due to package deformation, wire deformation and/or
disconnection.
(2) Should tweezers be used in product handling, one with flat surfaces is recommended.
(3) Please handle the product widthwise.
(4) Please do not drop the product. There is a possibility for package transformation etc. to occur when
the product is dropped.
(5) Please do not stack the printed circuit boards on which the product is mounted to prevent damages to
product surface. Also, please note not to damage the surface of the product with cushioning material
etc. Surface damage to the product may influence their optical characteristics.
(6) Solder, flux, paper or heat-sensitive materials that might be deformed or discolored at high
temperatures should not be left on the surface of an LED lamp.
3 2014-08-19
Rev.2.0


3Pages


TL3GB-WH1L 電子部品, 半導体
TL3GB-WH1,L
Table 7.2 Luminous Flux Rank (Note)
Rank
Test Condition
Luminous Flux (Min) Luminous Flux (Max) Unit
C20A
IF = 100 mA, Ta = 25 , Tolerance ±10 %
60.5
66.0 lm
C20B
66.0 72.0
C21A
72.0 78.5
Note: This LED lamp is sorted into luminous flux ranks shown above. Each reel includes the same rank LEDs. Let
the delivery ratio of each rank be unquestioned.
Rank notations: The luminous flux, chromaticity and VF ranks are printed on labels as shown below:
Example: 5A1 C20B 2
5A1: Chromaticity rank
C20B: Luminous flux rank
2: VF rank
6 2014-08-19
Rev.2.0

6 Page



ページ 合計 : 16 ページ
 
PDF
ダウンロード
[ TL3GB-WH1L データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
TL3GB-WH1

LED Lamps

Toshiba
Toshiba
TL3GB-WH1L

LED Lamps

Toshiba
Toshiba


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap