|
|
PDF SP14N001 Data sheet ( Hoja de datos )
| Número de pieza | SP14N001 | |
| Descripción | Display Module | |
| Fabricantes | KOE | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SP14N001 (archivo pdf) en la parte inferior de esta página. Total 20 Páginas | ||
|
No Preview Available !
FOR MESSRS:
DATE: Mar. 19th ,2013
CUSTOMER’S ACCEPTANCE SPECIFICATIONS
SP14N001
Contents
No. ITEM
1 COVER
2 RECORD OF REVISION
3 GENERAL SPECIFICATION
4 ABSOLUTE MAXIMUM RATINGS
5 ELECTRICAL CHARACTERISTICS
6 OPTICAL CHARACTERISTICS
7 BLOCK DIAGRAM
8 INTERFACE TIMING
9 OUTLINE DIMENSIONS
10 APPEARANCE STANDARD
11 PRECAUTION IN DESIGN
12 DESIGNATION OF LOT MARK
13 PRECAUTION FOR USE
SHEET No.
7B64PS 2701- SP14N001-9
7B64PS 2702- SP14N001-9
7B64PS 2703- SP14N001-9
7B64PS 2704- SP14N001-9
7B64PS 2705- SP14N001-9
7B64PS 2706- SP14N001-9
7B64PS 2707- SP14N001-9
7B64PS 2708- SP14N001-9
7B64PS 2709- SP14N001-9
7B64PS 2710- SP14N001-9
7B64PS 2711- SP14N001-9
7B64PS 2712- SP14N001-9
7B64PS 2713- SP14N001-9
PAGE
1-1/1
2-1/1
3-1/1
4-1/1
5-1/1
6-1/2~2/2
7-1/1
8-1/2~2/2
9-1/3~3/3
10-1/3~3/3
11-1/2~2/2
12-1/1
13-1/1
ACCEPTED BY:
KAOHSIUNG OPTO-ELECTRONICS INC.
SHEET
NO.
PROPOSED BY:
7B64PS 2701-SP14N001-9
PAGE 1-1/1
1 page  
5. ELECTRICAL CHARACTERISTICS
5.1 ELECTRICAL CHARACTERISTICS
ITEM
SYMBOL
CONDITION
Power Supply Voltage
for Logic
VDD-VSS
－
Input Voltage Note 1
VI
H LEVEL
L LEVEL
Power Supply Current
for Logic
Note 1
IDD VDD-V0=(15.8V)
Recommended
LC Driving Voltage
Note 2
VDD-V0
OUT
Ta=-10℃ , = 0°
Ta=25℃ , = 0°
Ta=60℃ , = 0°
MIN.
4.75
0.8VDD
0
－
－
－
－
TYP.
5.0
－
－
40
16.9
15.8
15.2
MAX. UNIT
5.25 V
VDD V
0.2VDD V
－ mA
－V
－V
－V
Note 1 : VDD-V0=15.8V , Ta=25℃
Note 2 : Recommended LC driving voltage may fluctuate about ±1.0V by each module.
Test pattern is all “Q”.
5.2 ELECTRICAL CHARACTERISTICS OF BACKLIGHT
ITEM
SYMBOL MIN. TYP.
Lamp Voltage
VL - 300
Frequency
fL - 70
Lamp Current
IL 4 5
Starting Discharge Voltage
VS
Note 2
1000
-
MAX.
-
85
6
UNIT REMARKS
Vrms Ta=25℃
kHz Ta=25℃
mArms Ta=25℃
- Vrms Ta=25℃
Please certainly inform KOE before designing lamp drive circuit according to the
above specifications.
Note 1 : Please make sure that your inverter is designed to meet the above specifications.
Note 2 : Starting discharge voltage is increased when LCM is operating at lower
temperature. Please check the characteristics of your inverter before appling to
your set.
Note 3 : Average life time of CFL will be decreased when LCM is operating at lower
temperature.
Note 4 : Under lower driving frequency of an inverter, a certain backlight system
(CFL & CFL reflection sheet) may generate a sound noise.
Note 5 : When IL is used over 5.5mA, it may cause uneven contrast near CFL location,
due to heat dispersion from CFL.
KAOHSIUNG OPTO-ELECTRONICS INC.
SHEET
NO.
7B64PS 2705- SP14N001-9
PAGE 5-1/1
5 Page 
11 Page | ||
| Páginas | Total 20 Páginas | |
| PDF Descargar | [ Datasheet SP14N001.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| sp14n001 | LCD_Module |  HITACHI |
| SP14N001 | Display Module | KOE |
| SP14N001-Z1 | DISPLAY MODULE |  Hitachi |
| SP14N001-Z1A | DISPLAY MODULE | Hitachi |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |