|
|
Número de pieza | LM146-121SL01 | |
Descripción | Sunlight Readable LCD Module | |
Fabricantes | Landmark | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de LM146-121SL01 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! LM146-121SL01 - 12.1"
Sunlight Readable LCD Module
Introduction
LM146-121SL01 is a 12.1" sunlight readable LCD module. The module consists of a Mitsubishi AA121SL01 TFT
color LCD panel and a Landmark VHB (very high brightness) backlight. The module has the same foot print and
uses the same mounting holes as the original AA121SL01 LCD.
At the maximum backlight power of 20 Watts, the LM146-121SL01 module delivers a screen luminance of about
1,850 Cd/m2 (nits). At this brightness level, the display is highly readable under bright ambient lighting including
direct outdoor sunlight. It is recommended that the Landmark BI200A inverter be used to operate the backlight in
this LCD module. With this inverter, the LCD screen luminance can be adjusted down to 10 Cd/m2 for night viewing.
Characteristics (Note 1, 2)
Parameters
LCD Screen Luminance
Typical Value
1,850
Units
Cd/m2
Conditions
LCD in OFF state (normally White)
Luminance Uniformity
20% or better
Note 3
Backlight Power Consumption
20
Watts
Excluding inverter losses
Screen Luminance Dimming Ratio 200:1
With LMT BI200A inverter
Typical LCD Contrast Ratio
550:1
White vs. Black (measured in the
dark along the normal direction)
Typical Viewing Angles
3:00 direction
9:00 direction
6:00 direction
12:00 direction
> 60
> 60
> 60
> 45
Degrees
Degrees
Degrees
Degrees
Contrast ratio ≥ 10
Contrast ratio ≥ 10
Contrast ratio ≥ 10
Contrast ratio ≥ 10
LCD Screen Chromaticity (x, y)
White
Red
Green
Blue
(0.354, 0.378)
(0.603, 0.340)
(0.337, 0.557)
(0.168, 0.207)
Measured at the normal direction
Measured at the normal direction
Measured at the normal direction
Measured at the normal direction
Response Speed
Rise time
Fall time
20
msec
White to Black, 10% - 90% transition
30
msec
Black to White, 10% - 90% transition
LCD Module Weight
680
Grams
Note 1: Please refer to Mitsubish AA121SL01 LCD Specification for detailed electrical specifications and general precautions.
Note 2: All data is measured at 25o C ± 2oC ambient temperature.
Note 3: Uniformity = (Lmax - Lmin) / (Lmax + Lmin) where Lmax (Lmin) is the maximum (minimum) luminance measured using a 10
mm diameter meter aperture over the LCD active area, except the last 10 mm area from the edges.
Landmark Technology 172 Component Drive San Jose, CA 95131 (408) 434-9302 Fax: (408) 434-0954
11/2003
Updated 03/2004 www.landmarktek.com
1 page Landmark Technology
LM146-121SL01 P.5
LCD Module Mechanical Dimensions
Landmark Technology 172 Component Drive San Jose, CA 95131 (408) 434-9302 Fax: (408) 434-0954
11/2003
Updated 03/2004 www.landmarktek.com
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet LM146-121SL01.PDF ] |
Número de pieza | Descripción | Fabricantes |
LM146-121SL01 | Sunlight Readable LCD Module | Landmark |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |