|
|
PDF ILQ620 Data sheet ( Hoja de datos )
| Número de pieza | ILQ620 | |
| Descripción | (ILD620 - ILD620GB) Optocoupler | |
| Fabricantes | Vishay | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ILQ620 (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
|
No Preview Available !
www.vishay.com
ILD620, ILD620GB, ILQ620, ILQ620GB
Vishay Semiconductors
Optocoupler, Phototransistor Output, AC Input
(Dual, Quad Channel)
Dual Channel
Quad Channel
A/C 1
A/C 2
A/C 3
A/C 4
A/C 1
A/C 2
8 C A/C 3
7 E A/C 4
6 C A/C 5
5 E A/C 6
A/C 7
A/C 8
16 C
15 E
14 C
13 E
12 C
11 E
10 C
9E
DVE
DESCRIPTION
The ILD620, ILQ620, ILD620GB, and ILQ620GB are
multi-channel input phototransistor optocouplers that use
inverse parallel GaAs IRLED emitter and high gain NPN
silicon phototransistors per channel. These devices are
constructed using over/under leadframe optical coupling
and double molded insulation resulting in a withstand test
voltage of 5300 VRMS.
The LED parameters and the linear CTR characteristics
make these devices well suited for AC voltage detection.
The ILD620GB and ILQ620GB with its low IF guaranteed
CTRCEsat minimizes power dissipation of the AC voltage
detection network that is placed in series with the LEDs.
Eliminating the phototransistor base connection provides
added electrical noise immunity from the transients found in
many industrial control environments.
FEATURES
• Identical channel to channel footprint
• ILD620 crosses to TLP620-2
• ILQ620 crosses to TLP620-4
• High collector emitter voltage, BVCEO = 70 V
• Dual and quad packages feature:
- Reduced board space
- Lower pin and parts count
- Better channel to channel CTR match
- Improved common mode rejection
• Isolation test voltage 5300 VRMS
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
AGENCY APPROVALS
• UL1577, file no. E52744 system code H, double protection
• cUL tested to CSA 22.2 bulletin 5A
• DIN EN 60747-5-5 (VDE 0884)
• FIMKO
• CQC GB4943.1-2011 and GB8898:2011 (suitable for
installation altitude below 2000 m)
ORDERING INFORMATION
I Lx620xx -X0##T
PART NUMBER
x = D (Dual) or Q (Quad)
PACKAGE OPTION
TAPE
AND
REEL
DIP
7.62 mm
Option 7
Option 9
> 0.7 mm
> 0.1 mm
AGENCY CERTIFIED/PACKAGE
DUAL CHANNEL
CTR (%)
QUAD CHANNEL
UL, cUL, FIMKO
50 to 600
100 to 600
50 to 600
100 to 600
DIP-8
SMD-8, option 7
SMD-8, option 9
ILD620
ILD620-X007T (1)
ILD620-X009T (1)
ILD620GB
-
ILD620GB-X009T (1)
-
-
-
-
-
-
DIP-16
-
-
ILQ620
ILQ620GB
SMD-16, option 7
SMD-16, option 9
- - ILQ620-X007 -
-
-
ILQ620-X009T (1)
ILQ620GB-X009T (1)
VDE, UL, cUL, FIMKO
50 to 600
100 to 600
50 to 600
100 to 600
DIP-16
SMD-16, option 9
- - ILQ620-X001 -
- - ILQ620-X019T (1) -
Notes
• Additional options may be possible, please contact sales office.
(1) Also available in tubes, do not put T on the end.
Rev. 1.8, 12-Apr-13
1 Document Number: 83653
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1 page  
www.vishay.com
ILD620, ILD620GB, ILQ620, ILQ620GB
Vishay Semiconductors
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
IF = 10 mA
VCC = 5 V
VO
f = 10 kHz,
DF = 50 %
RL = 75 Ω
iild620_01
Fig. 3 - Non-Saturated Switching Timing
IF
tD
VO tR
t PLH
iild620_04
t PHL
V TH = 1.5 V
tS tF
Fig. 6 - Saturated Switching Timing
f = 10 kHz,
DF = 50 %
VCC = 5 V
R L = 1 kΩ
VO
IF = 10 mA
iild620_02
Fig. 4 - Saturated Switching Timing
IF
VO t PLH
t PLH
tS
50 %
iild620_03
tD tR
t on
tF
t off
Fig. 5 - Non-Saturated Switching Timing
60
40
20
25 °C
0
- 20
85 °C
- 55 °C
- 40
- 60
- 1.5 - 1.0 - 0.5 0.0 0.5 1.0 1.5
iild620_05 VF - LED Forward Voltage (V)
Fig. 7 - LED Forward Current vs.Forward Voltage
105
104
103
102
VCE = 10 V
101
Typical
100
10- 1
10- 2
- 20
0
20 40 60 80 100
iild620_06 TA - Ambient Temperature (°C)
Fig. 8 - Collector Emitter Leakage vs. Temperature
Rev. 1.8, 12-Apr-13
5 Document Number: 83653
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
5 Page | ||
| Páginas | Total 9 Páginas | |
| PDF Descargar | [ Datasheet ILQ620.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ILQ620 | AC INPUT PHOTOTRANSISTOR OPTOCOUPLER |  Siemens Semiconductor Group |
| ILQ620 | (ILD620 - ILD620GB) Optocoupler | Vishay |
| ILQ620B | AC INPUT PHOTOTRANSISTOR OPTOCOUPLER | Siemens Semiconductor Group |
| ILQ620GB | (ILD620 - ILD620GB) Optocoupler | Vishay |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |