|
|
Número de pieza | D1U3CS-D-850-12-HC4C | |
Descripción | 81mm 1U Front End DC-DC Power Supply Converter | |
Fabricantes | Murata Power Solutions | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de D1U3CS-D-850-12-HC4C (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! www.murata-ps.com
D1U3CS-D-850-12-HxxC Series
81mm 1U Front End DC-DC Power Supply Converter
FEATURES
850W output power
87% efficient at half power
12V main output
3.3V or 5V standby output of 20W
1U height: 3.20" x 11.00" x 1.57"
15.4 Watts per cubic inch density
N+1 redundancy capable,
including hot plugging (up to 8 in parallel)
Active current sharing on 12V main output;
ORing FET
Overvoltage, overcurrent,
overtemperature protection
Internal cooling fan (variable speed)
PMBus™ / I²C interface with status indicators
RoHS compliant
www.murata-ps.com/en/3d/acdc.html
www.murata-ps.com/en/3d/acdc.html
www.murata-ps.com/en/3d/acdc.html
www.murata-ps.com/en/3d/acdc.html
www.murata-ps.com/en/3d/acdc.html
www.murata-ps.com/en/3d/acdc.html
Available now at
www.murata-ps.com/en/3d/acdc.html
For full details go to
www.murata-ps.com/rohs
PRODUCT OVERVIEW
The D1U3CS-D-850-12-HxxC series are highly efficient 850 watt, DC input front end supplies with a 12V
main output and a 3.3V (20W) standby. They have active current sharing and up to 8 supplies may be
operated in parallel. The supplies may be hot plugged, they recover from overtemperature faults, and have
logic and PMBus status signals. Their low profile 1U package and >15W/cubic inch power density make
them ideal for delivering reliable, efficient power for telecom and other 12V distributed power systems that
include servers, workstations and storage systems.
ORDERING GUIDE
Part Number
D1U3CS-D-850-12-HC4C
D1U3CS-D-850-12-HC3C
Power Output
Main
Output
850W
12V
Standby Output1 Airflow
3.3V
Back to front
Front to back
INPUT CHARACTERISTICS
Parameter
Input Voltage Operating Range
Turn-on Input Voltage
Turn-off Input Voltage
Maximum Current at Vin = -40Vdc
DC Line Inrush Peak Current
Efficiency (-40Vdc - 72Vdc)
Conditions
Ramp up
Ramp down
850W
Cold start between 0 to 200msec
Cold start between 0 to 200msec
20% load
50% load
100% load
Min.
-40
-40
-38.5
40V
72V
85
87
87
Nom.
-48
-43.5
-39
Max.
-72
-44
-39.5
25
50Apk
100Apk
Units
Vdc
Adc
%
OUTPUT VOLTAGE CHARACTERISTICS
Output
Voltage
Parameter
Conditions
Min. Typ. Max. Units
12V
3.3VSB
Voltage Set Point Accuracy
Line and Load Regulation
Ripple Voltage & Noise2
Output Current
Load Capacitance
Voltage Set Point Accuracy
Line and Load Regulation
Ripple Voltage & Noise2
Output Current
Load Capacitance
20MHz Bandwidth
20MHz Bandwidth
12.0
11.4 12.6
Vdc
120 mV p-p
0 69.1 A
30000 μF
3.3
3.2 3.4
Vdc
50 mV p-p
0 6A
10000 μF
1 For 5vSB, contact Murata Sales for availablity.
2 Ripple and noise are measured with 0.1 μF of ceramic capacitance and 10 μF of tantalum capacitance on each of the power supply
outputs. A short coaxial cable with 50Ω scope termination is used.
CB
Test Certificate
and Test Report
www.murata-ps.com/support
D1U3CS-D-850-12-HxxC.A03 Page 1 of 5
1 page MECHANICAL DIMENSIONS
31.00
1.220
D1U3CS-D-850-12-HxxC Series
81mm 1U Front End DC-DC Power Supply Converter
275.50 ±0.30
10.846 ±0.012
[1]
279.40 ±0.50
11.000 ±0.020
7.00
0.275
83.80 ±0.30
3.299 ±0.012
Airflow Back to Front
Airflow Front to Back
Dimensions: 3.20" x 11.00" x 1.571" [81.3mm x 279.4mm x 39.9mm]
OPTIONAL ACCESSORIES
Description
12V D1U3CS Output Connector Card
APPLICATION NOTES
Document Number
ACAN-41
ACAN-43
Part Number
D1U3CS-12-CONC
Description
D1U3CS Output Connector Card
D1U3CS-x Communication Protocol
NOTE
[1] CRITICAL TO FUNCTION.
15.51 ±0.25
0.610 ±0.010
[1]
Link
www.murata-ps.com/data/apnotes/acan-41.pdf
www.murata-ps.com/data/apnotes/acan-43.pdf
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
www.murata-ps.com/support
This product is subject to the following operating requirements
and the Life and Safety Critical Application Sales Policy:
Refer to: http://www.murata-ps.com/requirements/
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice.
© 2013 Murata Power Solutions, Inc.
D1U3CS-D-850-12-HxxC.A03 Page 5 of 5
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet D1U3CS-D-850-12-HC4C.PDF ] |
Número de pieza | Descripción | Fabricantes |
D1U3CS-D-850-12-HC4C | 81mm 1U Front End DC-DC Power Supply Converter | Murata Power Solutions |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |