|
|
43WVF1G-0のメーカーはSeikoです、この部品の機能は「WVGA TFT LCD Module」です。 |
部品番号 | 43WVF1G-0 |
| |
部品説明 | WVGA TFT LCD Module | ||
メーカ | Seiko | ||
ロゴ | |||
このページの下部にプレビューと43WVF1G-0ダウンロード(pdfファイル)リンクがあります。 Total 17 pages
Product specification of 43WVF1G-0 (Rev.1.0) Page.
LIQUID CRYSTAL DISPLAY MODULE
4.3” WVGA (800 x RGB x 480) TFT
with Touch-Panel
Product Code: 43WVF1G-0
Product Specification
APPROVAL
Seiko Instruments Inc.
Mobile Display Division
1-8 Nakase Mihama-ku Chiba-shi,
Chiba ,261 , Japan
1 Page Contents
Product specification of 43WVF1G-0 (Rev.1.0) Page.
1. General
1-1 Application
1-2 Name of product, model number
1-3 Mechanical Dimensions
1-4 Quality Assurance Standard
2. Product specifications
2-1 Basic Specifications
2-2 Interface (LCD)
2-3 Interface (Touch-Panel)
3. Recommended Power ON/OFF Sequence
3-1 Power ON/OFF Sequence
4. Electrical Characteristics
4-1 Absolute Maximum Rating
4-2 Electrical Characteristics
4-3 Parallel RGB Input Timing Characteristics
4-4 AC Timing Characteristics
4-5 Pixel Data Format
4-6 Input Data Signal and Each Colors
5. LCD Optical Characteristics
6. LED Backlight Characteristics
7. Touch Panel Characteristics
7-1 Electrical characteristics
7-2 Mechanical characteristics
8. Reliability
8-1 Reliability levels
8-2 Criteria
9. Handling Precautions
9-1 Operation
9-2 Safety
9-3 Handling
9-4 Static Electricity
9-5 Storage
9-6 Cleaning
9-7 Waste
10. Design/Handing Guideline for Touch Panel
10-1 Bezel/Housing design
10-2 Mounting on diplay and housing bezel
10-3 Prohibited Operation
3Pages Product specification of 43WVF1G-0 (Rev.1.0) Page.
3. Recommended Power ON/OFF Sequence
3-1 Power ON/OFF Sequence
To prevent the device damage from latch up or DC operation, the Power ON/OFF Sequence shall be as
shown in below.
DVDD
Interface Signal
(PCLK,Hsync,
Vsync,Data)
AVDD
2
DISP
3
Source Output
invalid
10 frames
Blank data
LED Backlight(example)
T4
2
4
valid
T5
10 frames
Blank data
invalid
Parameter
T1
T2
T3
T4
T5
Specification
0 < T1 < 50
0 < T2 < 50
0 < T3 < 50
170 (10 frames) < T4
0 < T5
unit
ms
ms
ms
ms
ms
NOTE:
When DISP pin is pulled “H”, blank data is output for 10 frames first, from the falling edge of the following
VSYNC signal. Similarly, when DISP is pulled “L”, 10 frames of blank data will be output from the falling
edge of the following VSYNC, too.
6 Page | |||
ページ | 合計 : 17 ページ | ||
|
PDF ダウンロード | [ 43WVF1G-0 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
43WVF1G-0 | WVGA TFT LCD Module | Seiko |