|
|
Número de pieza | AM-480272-043BT | |
Descripción | LCD Module | |
Fabricantes | AMSON | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AM-480272-043BT (archivo pdf) en la parte inferior de esta página. Total 17 Páginas | ||
No Preview Available ! AM-480272-043BT
Version: A
2013-01-07
Specification for Approval
Customer:
Model Name:
Supplier Approval
Customer approval
R&D Designed R&D Approved QC Approved
Peter Peng Jun
YU DU AMSON ELECTRONICS CO.,LTD.
Page 1 of 17
1 page AM-480272-043BT
3. External Dimensions
Version: A
2013-01-07
YU DU AMSON ELECTRONICS CO.,LTD.
Page 5 of 17
5 Page AM-480272-043BT
Version: A
2013-01-07
10. Reliability Test Conditions and Methods
NO. TEST ITEMS
TEST CONDITION
INSPECTION AFTER
TEST
High
Temperature
Storage
Low
Temperature
Storage
High
Temperature
Operating
Low
Temperature
Operating
Temperature
Cycle(Storage)
Damp Proof
Test (Storage)
Vibration Test
Drooping Test
80°C±2°C×200Hours
-30°C±2°C×200Hours
70°C±2°C×120Hours
-20°C±2°C×120Hours
-20°C
(30min)
25°C
70°C
(5min) (30min)
1cycle
Total 10cycle
50°C±5°C×90%RH×120Hours
Frequency:10Hz~55Hz~10Hz
Amplitude:1.5M
X,Y,Z direction for total 3hours
(Packing Condition)
Drop to the ground from 1M height
one time
every side of carton.
(Packing Condition)
Inspection after
2~4hours storage at
room temperature,
the samples should
be free from defects:
1, Air bubble in the
LCD.
2, Seal leak.
3, Non-display.
4, Missing segments.
5, Glass crack.
6, Current IDD is
twice higher than
initial value.
7, The surface shall
be free from damage.
8, The electric
characteristic
requirements shall be
satisfied.
ESD Test
Voltage:±8KV,R:330Ω,C:150PF,Air
Mode,10times
REMARK:
1, The Test samples should be applied to only one test item.
2, Sample side for each test item is 5~10pcs.
3,For Damp Proof Test, Pure water(Resistance>10MΩ)should be used.
4,In case of malfunction defect caused by ESD damage, if it would be recovered to
normal state after resetting, it would be judge as a good part.
5, EL evaluation should be accepted from reliability test with humidity and
temperature: Some defects such as black spot/blemish can happen by natural
chemical reaction with humidity and Fluorescence EL has.
6, Failure Judgment Criterion: Basic Specification Electrical Characteristic,
Mechanical Characteristic, Optical Characteristic.
YU DU AMSON ELECTRONICS CO.,LTD.
Page 11 of 17
11 Page |
Páginas | Total 17 Páginas | |
PDF Descargar | [ Datasheet AM-480272-043BT.PDF ] |
Número de pieza | Descripción | Fabricantes |
AM-480272-043BT | LCD Module | AMSON |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |