DataSheet.jp

HV050V01-100 の電気的特性と機能

HV050V01-100のメーカーはBOEです、この部品の機能は「TFT LCD」です。


製品の詳細 ( Datasheet PDF )

部品番号 HV050V01-100
部品説明 TFT LCD
メーカ BOE
ロゴ BOE ロゴ 




このページの下部にプレビューとHV050V01-100ダウンロード(pdfファイル)リンクがあります。
Total 30 pages

No Preview Available !

HV050V01-100 Datasheet, HV050V01-100 PDF,ピン配置, 機能
PROPRIETARY NOTE
THIS SPECIFICATION IS THE PROPERTY OF BOE HYDIS AND SHALL NOT
BE REPRODUCED OR COPIED WITHOUT THE WRITTEN PERMISSION OF
BOE HYDIS AND MUST BE RETURNED TO BOE HYDIS UPON ITS
REQUEST.
TITLE : HV050V01-100
Product Specification
Rev. O
BOE HYDIS TECHNOLOGY
SPEC. NUMBER PRODUCT GROUP
S864-1268
TFT-LCD PRODUCT
B2005-C001-A (1/3)
REV. ISSUE DATE
O 2006.01.25
PAGE
1 OF 38
A4(210 X 297)

1 Page





HV050V01-100 pdf, ピン配列
PRODUCT GROUP
TFT-LCD PRODUCT
Contents
No Item
1.0 General Description
2.0 Environmental Absolute Maximum Ratings
3.0 Optical Specifications
4.0 Electrical Specifications
5.0 FPC
6.0 X – Driver IC
7.0 Y – Driver IC
8.0 Signal Timing Specification
9.0 Reliability Test
10.0 Handling & Cautions
11.0 Appendix
REV.
O
ISSUE DATE
2006.01.25
Page
4
5
6
8
9
11
14
16
21
23
24
SPEC. NUMBER
S864-1268
B2005-C001-A (3/3)
SPEC. TITLE
HV050V01-100 Product Specification
PAGE
3 OF 38
A4(210 X 297)


3Pages


HV050V01-100 電子部品, 半導体
PRODUCT GROUP
REV. ISSUE DATE
TFT-LCD PRODUCT
O 2006.01.25
3.0 OPTICAL SPECIFICATIONS
3.1 Overview
The test of Optical specifications shall be measured in a dark room (ambient luminance 1 lux and
temperature = 25±2) with the equipment of Luminance meter system (Goniometer system and
TOPCON BM-5) and test unit shall be located at an approximate distance 50cm from the LCD
surface at a viewing angle of θ and φ equal to 0°. We refer to θφ=0 (=θ3) as the 3 o’clock direction
(the “right”), θφ=90 (=θ12) as the 12 o’clock direction (“upward”), θφ=180 (=θ9) as the 9 o’clock
direction (“left”) and θφ=270 (=θ6) as the 6 o’clock direction (“bottom”). While scanning θ and/or φ,
the center of the measuring spot on the display surface shall stay fixed. The measurement should be
executed after 30 minutes with power-on of LED back-light at 18VDC voltage for warm-up period.
The test setup, geometry, and measurement location are shown at FIGURE 1 and FIGURE 2 in
Appendix.
3.2 Optical Specifications
To get the value in the following optical specifications, the electronics and back-light driving circuit
must be optimized.
< Table 3. Optical Specifications >
Parameter
Condition Min Typ Max Unit Remark
Viewing
Angle
Horizontal
Vertical
CR > 10
-
-
-
-
89 90 Deg
89 90 Deg
Note 1
89 90 Deg
89 90 Deg
Contrast Ratio
Θ = 0°
- 550
-
Note 2
Contrast Ratio (at 80° V.A.) Θ = 80° - 100 -
CR Symmetry
Θ ≥ 60°
-
75
-
Contrast Uniformity
- 75 -
Black Level Uniformity
- 85 -
CF Color Reproduction
- 45 - %
Response time (at 45)
Ttotal
(Tr + Td)
-
- 35 msec Note. 3
Cross talk
- - 2.0 % Note 4
SPEC. NUMBER
S864-1268
B2005-C001-A (3/3)
SPEC. TITLE
HV050V01-100 Product Specification
PAGE
6 OF 38
A4(210 X 297)

6 Page



ページ 合計 : 30 ページ
 
PDF
ダウンロード
[ HV050V01-100 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
HV050V01-100

TFT LCD

BOE
BOE


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap