DataSheet.jp

PDF CAP200AAANA Data sheet ( 特性 )

部品番号 CAP200AAANA
部品説明 High Voltage DC Contactors
メーカ TE
ロゴ TE ロゴ 

このページの下部にプレビューとCAP200AAANAダウンロード(pdfファイル)リンクがあります。

Total 2 pages

No Preview Available !

CAP200AAANA Datasheet, CAP200AAANA PDF,ピン配置, 機能
KILOVAC High Voltage DC Contactors
KILOVAC CAP200 Series Contactor with 1 Form A (SPST-NO)
Contacts Rated up to 500 Amps, 12-900 Vdc
Product Facts
n Designed to be the
smallest, lightest weight,
lowest cost sealed contactor
in the industry with its
current rating
n Built-in coil economizer —
only 1.7W hold power @
12VDC and it limits back
EMF to 0V. (models
requiring external
economizer also available)
n Optional auxiliary contact
for easy monitoring of
power contact position
n Hermetically sealed —
intrinsically safe, operates
in explosive/harsh
environments with no
oxidation or contamination
of coil or contacts, including
long periods of non-
operation
n Versatile coil and power
connections
n RoHS versions available
Coil Operating Voltage (Valid Over Temperature Range)
Voltage (Will Operate)
9-36VDC 32-95VDC 48-95VDC
Voltage (Max.)
36VDC
95VDC
95VDC
Pickup (Close) Voltage Max.
9VDC
32VDC
48VDC
Hold Voltage (Min.)
7.5VDC
22VDC
34VDC
Dropout (Open) Voltage (Min.) 6VDC
18VDC
27VDC
Inrush Current (Max.)
3.8A
1.3A
0.7A
Holding Current (Avg.)
0.13A@12V,
0.07A@24V
0.03A@48V
0.02A@72V
Inrush Time (Max.)
130ms
130ms
130ms
Ordering Information
Typical Part Number
CAP200 A A A N A
Series:
CAP200 = 500 Amp, 12-900VDC Contactor
Contact Form:
A = Normally Open
H = Normally Open with Aux. Contacts
Coil Voltage:
A = 9-36VDC (1 = requires external coil economizer)
D = 32-95VDC (2 = requires external coil economizer)
J = 48-95VDC (3 = requires external coil economizer)
R = 28 Vdc with mechanical economizer
Coil Wire Length:
A = 15.3 in (390 mm)
D = Coil connector on relay (requires option
“E” or “X” in next step)
Coil Terminal Connector:
N = None
E = 9-pin subminiature “D” plug mounted on
contactor housing
F = 9-pin subminiature “D” plug mounted on 15.3 in
(390 mm) flying leads.
X = Special configuration (consult factory)
For factory-direct application assistance, Mounting & Power Terminals:
dial 800-253-4560, ext. 2055, or
A = Bottom Mount & Male 10mm x 8 Terminals
805-220-2055.
7–16
Catalog 5-1773450-5
Revised 3-13
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
Performance Data
Contact Arrangement, Power
Contacts — 1 Form A (SPST-NO)
Rated Operating Voltage
12 - 900 VDC
Continuous (Carry) Current,
Typical — 500 A @ 85°C, 400 mcm
conductors
Consult Factory for required conductors
for higher currents
Make/Break Current at Various
Voltages 1 — See graph next page
Break Current at 320VDC 1
2,000 A, 1 cycle 3
Contact Resistance, Typ.
(@200A) — 0.2 mohms
Load Life — See graph next page
Mechanical Life — 1 million cycles
Contact Arrangement, Auxiliary
Contacts — 1 Form A (SPST-NO)
Aux. Contact Current, Max.
2A @ 30VDC / 3A @ 125VAC
Aux. Contact Current, Min.
100mA @ 8V
Aux. Contact Resistance, Max.
0.417 ohms @ 30VDC /
.150 ohms @ 125VAC
Dielectric Withstanding Voltage
2,200 Vrms @ sea level
Insulation Resistance @ 500VDC
100 megohms 2
Shock, 11ms 1/2 Sine, Peak,
Operating — 20 G
Vibration, Sine, 80-2000Hz.,
Peak — 20 G
Operating Temperature
-40°C to +85°C
Weight, Nominal — .95 lb. (.43 kg)
Notes:
1 Main power contacts
2 50 at end of life
3 Does not meet dielectric & IR after
test, 1700 amp for unit with Aux.
Contacts
For additional support numbers
please visit www.te.com

1 Page







ページ 合計 : 2 ページ
 
PDF
ダウンロード
[ CAP200AAANA.PDF ]


共有リンク

Link :


おすすめデータシート

部品番号部品説明メーカ
CAP200AAANA

High Voltage DC Contactors

TE
TE


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap