DataSheet.jp

ISL6247 PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 ISL6247
部品説明 A Mobile Multi-Phase PWM Controller
メーカ Intersil Corporation
ロゴ Intersil Corporation ロゴ 



Total 28 pages
		

No Preview Available !

ISL6247 Datasheet, ISL6247 PDF,ピン配置, 機能
®
CONFIDENTIAL
Data Sheet
June 2003
ISL6247
FN9113
A Mobile Multi-Phase PWM Controller with
Precision Current Sensing
The ISL6247 provides microprocessor core-voltage
regulation by driving up to four interleaved synchronous-
rectified buck-converter channels in parallel. Multi-phase
buck converter architecture uses interleaved timing to
multiply ripple frequency and reduce input and output ripple
currents. The reduction in ripple results in fewer
components, lower component cost, reduced power
dissipation, and smaller implementation area. The ISL6247
multi-phase controller together with ISL6207 gate drivers
forms the basis for a portable power supply solution to power
Intel’s next generation mobile microprocessors.
Intel Mobile Voltage Positioning (IMVP) is a smart voltage
regulation technology which effectively reduces power
dissipation in Intel® Pentium® Processors. The ISL6247
supports the IMVP-5 mobile processor voltage regulation
specifications. To boost battery life, the ISL6247 operates in
Active, Deep Sleep, or Deeper Sleep modes, depending
upon the logic levels at the DSEN# and DRSEN pins. A 6-bit
digital-to-analog converter (DAC) allows dynamic adjustment
of the core output voltage from 0.8375V to 1.6V. The
controller features a thermal monitor which sends a signal to
the microprocessor to reduce the load before power system
components exceed their maximum thermal limits, reducing
the thermal design complexity and overall core-voltage
regulation cost.
To improve efficiency, the ISL6247 allows users to select one
of two popular lossless current sense techniques. The
ISL6247 supports detection via inductor coil resistance
(DCR), or the rDS(ON) of the lower MOSFET. Either cost and
space-saving method provides feedback for precision droop,
channel current balancing, and individual channel
over-current protection. A unity gain, differential amplifier is
provided for remote voltage sensing. The differential
amplifier eliminates errors due to potential differences
between remote and local grounds. Eliminating ground
differences improves regulation and protection accuracy.
The channel switching frequency is adjustable in the range
of 200kHz to 1.0MHz, providing flexibility in managing the
balance between high-speed response, target efficiency, and
good thermal management.
Ordering Information
PART NUMBER TEMP. (oC) PACKAGE PKG. DWG. #
ISL6247CR
-10 to 100 40 Ld 6x6 QFN L40.6X6
ISL6247CR-T 40 Lead 6x6 QFN Tape and Reel
Lead-Free Packaging (Pb Free)
ISL6247CRZ
-10 to 100 40 Ld 6x6 QFN L40.6X6
ISL6247CRZ-T 40 Lead 6x6 QFN Tape and Reel
Features
• Precision Multi-Phase Core Voltage Regulation
- ±0.6% System Accuracy Over Temperature
• Microprocessor Voltage Identification Input
- 6-Bit VID Input
- 0.8375V to 1.600V in 12.5mV Steps
- Supports VID Changes During Operation
• Multiple Current Sensing Approaches Supported
- Lossless DCR Current Sensing
- Precision Resistive Current Sensing
- Low Cost RDS(on) Current Sensing
• Excellent Dynamic Response
- Combined Input Voltage Feed-Forward and Pulse-by-
Pulse Average Current Mode
• DSEN# and DRSEN Logic Inputs for Low Power States
• DSV Voltage Input for DEEP SLEEP Mode
• DRSV Voltage Input for DEEPER SLEEP Mode
• Thermal Monitor
• Active Channel Current Balancing
• Differential Remote Voltage Sensing
• Individual Channel Over-Current, Over-Voltage, and
Under-Voltage Protection
• 2, 3, or 4-Phase Operation
• User selectable Switching Frequency of 200K - 1.0MHz
- 400kHz - 4MHz Effective Ripple Frequency
• QFN Package Option
- QFN Compliant to JEDEC PUB95 MO-220 QFN - Quad
Flat No Leads - Product Outline
- QFN Near Chip Scale Package Footprint; Improves
PCB Efficiency, Thinner in Profile
Applications
• Notebook Computer IMVP-5 DC/DC converter
Pinout
ISL6247CR (40 LD QFN 6X6)
TOP VIEW
40 39 38 37 36 35 34 33 32 31
VID4 1
VID3 2
VID2
VID1
3
4
VID0 5
VID5 6
RAMPADJ 7
OFS
DSV
8
9
OCSET 10
GND PAD
[BOTTOM]
30 ISEN4+
29 ISEN4-
28 ISEN2-
27 ISEN2+
26 PWM2
25 PWM1
24 ISEN1+
23 ISEN1-
22 ISEN3-
21 ISEN3+
11 12 13 14 15 16 17 18 19 20
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003. All Rights Reserved..
All other trademarks mentioned are the property of their respective owners.

1 Page





ページ 合計 : 28 ページ
PDF
ダウンロード
[ ISL6247.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
ISL6244

Multi-Phase PWM Controller

Intersil Corporation
Intersil Corporation
ISL6244CR

Multi-Phase PWM Controller

Intersil Corporation
Intersil Corporation
ISL6244CRZ

Multi-Phase PWM Controller

Intersil Corporation
Intersil Corporation
ISL6244HR

Multi-Phase PWM Controller

Intersil Corporation
Intersil Corporation

www.DataSheet.jp    |   2019   |  メール    |   最新    |   Sitemap