DataSheet.jp

D2028 の電気的特性と機能

D2028のメーカーはSanyo Semicon Deviceです、この部品の機能は「NPN Transistor - 2SD2028」です。


製品の詳細 ( Datasheet PDF )

部品番号 D2028
部品説明 NPN Transistor - 2SD2028
メーカ Sanyo Semicon Device
ロゴ Sanyo Semicon Device ロゴ 




このページの下部にプレビューとD2028ダウンロード(pdfファイル)リンクがあります。

Total 3 pages

No Preview Available !

D2028 Datasheet, D2028 PDF,ピン配置, 機能
Ordering number:EN2803
NPN Epitaxial Planar Silicon Transistor
2SD2028
Low-Frequency Power Amplifier Applications
Features
· With Zener diode (11±3V) between collector and
base.
· Large current capacity.
· Low collector-to-emitter saturation voltage.
· Ultrasmall-sized package permitting the 2SD2028-
applied sets to be made small and slim.
Package Dimensions
unit:mm
2018B
[2SD2028]
0.4
3
0.16
0 to 0.1
1 0.95 0.95 2
1.9
2.9
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Collector-to-Base Voltage
Collector-to-Emitter Voltage
Emitter-to-Base Voltage
Collector Current
Collector Current (Pulse)
Collector Dissipation
Junction Temperature
Storage Temperature
Symbol
VCBO
VCEO
VEBO
IC
ICP
PC
Tj
Tstg
Conditions
With Zener diode (11±3V)
With Zener diode (11±3V)
Electrical Characteristics at Ta = 25˚C
Parameter
Symbol
Conditions
Collector Cutoff Current
ICBO VCB=6V, IE=0
Emitter Cutoff Current
DC Current Gain
Gain-Bandwidth Product
IEBO
hFE1
hFE2
fT
VEB=4V, IC=0
VCE=2V, IC=50mA
VCE=2V, IC=500mA
VCE=2V, IC=50mA
Output Capacitance
Cob VCB=5V, f=1MHz
* : The 2SD2028 is classified by 50mA hFE as follows : 200
(Note) Marking : LT
hFE rank : 6, 7, 8
6 400 300 7 600 450 8 900
1 : Base
2 : Emitter
3 : Collector
SANYO : CP
Ratings
8
8
5
0.7
1.5
200
150
–55 to +150
Unit
V
V
V
A
A
mW
˚C
˚C
Ratings
min typ max
Unit
100 nA
100 nA
200*
900*
100
200 MHz
12 pF
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
31099TH (KT)/D148MO, TS No.2803–1/3

1 Page





D2028 pdf, ピン配列
2SD2028
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of March, 1999. Specifications and information herein are subject to
change without notice.
PS No.2803–3/3


3Pages





ページ 合計 : 3 ページ
 
PDF
ダウンロード
[ D2028 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
D2020L

Rectifiers

Teccor
Teccor
D2020UK

METAL GATE RF SILICON FET

Seme LAB
Seme LAB
D2020UK-P

METAL GATE RF SILICON FET

Seme LAB
Seme LAB
D2020UK.01

METAL GATE RF SILICON FET

Seme LAB
Seme LAB


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap