|
|
PDF SN8P2740 Data sheet ( Hoja de datos )
| Número de pieza | SN8P2740 | |
| Descripción | 8-Bit Micro-Controller | |
| Fabricantes | Sonix | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SN8P2740 (archivo pdf) en la parte inferior de esta página. Total 70 Páginas | ||
|
No Preview Available !
SN8P2740 Series
ADC, OP-amp, Comparator 8-Bit Micro-Controller
SN8P2740 Series
USER’S MANUAL
Version 1.6
SN8P2743
SN8P2742
SN8P27411
SONiX 8-Bit Micro-Controller
SONIX reserves the right to make change without further notice to any products herein to improve reliability, function or design. SONIX does not
assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent
rights nor the rights of others. SONIX products are not designed, intended, or authorized for us as components in systems intended, for surgical
implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SONIX product
could create a situation where personal injury or death may occur. Should Buyer purchase or use SONIX products for any such unintended or
unauthorized application. Buyer shall indemnify and hold SONIX and its officers, employees, subsidiaries, affiliates and distributors harmless against
all claims, cost, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use even if such claim alleges that SONIX was negligent regarding the design or manufacture of
the part.
SONiX TECHNOLOGY CO., LTD
Page 1
Version 1.6
1 page  
SN8P2740 Series
ADC, OP-amp, Comparator 8-Bit Micro-Controller
8.2.5 T0 TIMER OPERATION EXPLAME..................................................................................... 80
8.3 TC0 8-BIT TIMER/COUNTER ....................................................................................................... 81
8.3.1 OVERVIEW............................................................................................................................. 81
8.3.2 TC0 TIMER OPERATION ...................................................................................................... 82
8.3.3 PULSE WIDTH MODULATION (PWM) .............................................................................. 83
8.3.4 TC0 Pulse Generator Function ................................................................................................. 84
8.3.5 TC0M MODE REGISTER....................................................................................................... 86
8.3.6 TC0C COUNTING REGISTER .............................................................................................. 86
8.3.7 TC0R AUTO-RELOAD REGISTER....................................................................................... 87
8.3.8 TC0D PWM DUTY REGISTER ............................................................................................. 87
8.3.9 TC0 TIMER OPERATION EXPLAME .................................................................................. 88
99 ANALOG COMPARAOTR 0 ............................................................................................................... 90
9.1 OVERVIEW..................................................................................................................................... 90
9.2 NORMAL COMPARATOR MODE................................................................................................ 91
9.3 COMPARATOR 0 SPECIAL FUCNITON...................................................................................... 93
9.4 COMPARATOR MODE REGISTER .............................................................................................. 94
9.5 COMPARATOR APPLICATION NOTICE .................................................................................... 94
9.6 COMPARATOR 0 OPERATION EXPLAME ................................................................................ 95
1100 ANALOG COMPARAOTR 1 ........................................................................................................... 96
10.1 OVERVIEW..................................................................................................................................... 96
10.2 NORMAL COMPARATOR MODE................................................................................................ 97
10.3 COMPARATOR 1 SPECIAL FUCNITON...................................................................................... 99
10.4 COMPARATOR MODE REGISTER ............................................................................................ 100
10.5 COMPARATOR APPLICATION NOTICE .................................................................................. 101
10.6 COMPARATOR 1 OPERATION EXPLAME .............................................................................. 101
1111 ANALOG COMPARAOTR 2 ......................................................................................................... 102
11.1 OVERVIEW................................................................................................................................... 102
11.2 NORMAL COMPARATOR MODE.............................................................................................. 103
11.3 COMPARATOR 2 SPECIAL FUCNITON.................................................................................... 105
11.4 COMPARATOR MODE REGISTER ............................................................................................ 106
11.5 COMPARATOR APPLICATION NOTICE .................................................................................. 107
11.6 COMPARATOR 2 OPERATION EXPLAME .............................................................................. 107
1122 2K/4K BUZZER GENERATOR..................................................................................................... 108
12.1 OVERVIEW................................................................................................................................... 108
12.2 BZM REGISTER............................................................................................................................ 108
1133 8 CHANNEL ANALOG TO DIGITAL CONVERTER (ADC)................................................... 109
13.1 OVERVIEW................................................................................................................................... 109
13.2 ADC MODE REGISTER ............................................................................................................... 110
13.3 ADC DATA BUFFER REGISTERS.............................................................................................. 111
13.4 ADC OPERATION DESCRIPTION AND NOTIC ....................................................................... 112
13.4.1 ADC SIGNAL FORMAT ...................................................................................................... 112
13.4.2 ADC CONVERTING TIME .................................................................................................. 112
13.4.3 ADC PIN CONFIGURATION .............................................................................................. 113
13.5 ADC OPERATION EXAMLPE..................................................................................................... 114
13.6 ADC APPLICATION CIRCUIT ......................................................................................................... 116
1144 RAIL TO RAIL OP AMPLIFER.................................................................................................... 117
14.1 OVERVIEW................................................................................................................................... 117
14.2 OP AMP REGISTER...................................................................................................................... 117
1155 INSTRUCTION TABLE ................................................................................................................. 118
1166 ELECTRICAL CHARACTERISTIC ............................................................................................ 119
16.1 ABSOLUTE MAXIMUM RATING .............................................................................................. 119
16.2 ELECTRICAL CHARACTERISTIC............................................................................................. 119
SONiX TECHNOLOGY CO., LTD
Page 5
Version 1.6
5 Page 
Pull-Up
Resistor
PnM
PnUR
Pin
PnM
I/O Input Bus
Output
Latch
I/O Output Bus
P0.1: Open-drain shared pin, output only I/O:
VCC
OUTSIDE INSIDE
R
Pin
Open-Drain
Control
I/O Bus
SN8P2740 Series
ADC, OP-amp, Comparator 8-Bit Micro-Controller
SONiX TECHNOLOGY CO., LTD
Page 11
Version 1.6
11 Page | ||
| Páginas | Total 70 Páginas | |
| PDF Descargar | [ Datasheet SN8P2740.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SN8P2740 | 8-Bit Micro-Controller | Sonix |
| SN8P27411 | 8-Bit Micro-Controller | Sonix |
| SN8P2741A | 8-Bit Micro-Controller | Sonix |
| SN8P2742 | 8-Bit Micro-Controller | Sonix |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |