DataSheet.jp

BMP280 の電気的特性と機能

BMP280のメーカーはBoschです、この部品の機能は「Digital Pressure Sensor」です。


製品の詳細 ( Datasheet PDF )

部品番号 BMP280
部品説明 Digital Pressure Sensor
メーカ Bosch
ロゴ Bosch ロゴ 




このページの下部にプレビューとBMP280ダウンロード(pdfファイル)リンクがあります。

Total 30 pages

No Preview Available !

BMP280 Datasheet, BMP280 PDF,ピン配置, 機能
Data sheet
BMP280
Digital Pressure Sensor
Bosch Sensortec
BMP280: Data sheet
Document revision
Document release date
Document number
Technical reference code(s)
Notes
1.14
May 5th, 2015
BST-BMP280-DS001-11
0273 300 416
Data in this document are subject to change without notice. Product
photos and pictures are for illustration purposes only and may differ from
the real product’s appearance.

1 Page





BMP280 pdf, ピン配列
Datasheet
BMP280 Digital Pressure Sensor
Page 3
General Description
Robert Bosch is the world market leader for pressure sensors in automotive and consumer
applications. Bosch’s proprietary APSM (Advanced Porous Silicon Membrane) MEMS
manufacturing process is fully CMOS compatible and allows a hermetic sealing of the cavity in
an all silicon process. The BMP280 is based on Bosch’s proven Piezo-resistive pressure sensor
technology featuring high EMC robustness, high accuracy and linearity and long term stability.
The BMP280 is an absolute barometric pressure sensor especially designed for mobile
applications. The sensor module is housed in an extremely compact 8-pin metal-lid LGA
package with a footprint of only 2.0 × 2.5 mm2 and 0.95 mm package height. Its small
dimensions and its low power consumption of 2.7 µA @1Hz allow the implementation in battery
driven devices such as mobile phones, GPS modules or watches.
As the successor to the widely adopted BMP180, the BMP280 delivers high performance in all
applications that require precise pressure measurement. The BMP280 operates at lower noise,
supports new filter modes and an SPI interface within a footprint 63% smaller than the BMP180.
The emerging applications of in-door navigation, health care as well as GPS refinement require
a high relative accuracy and a low TCO at the same time. BMP180 and BMP280 are perfectly
suitable for applications like floor detection since both sensors feature excellent relative
accuracy is ±0.12 hPa, which is equivalent to ±1 m difference in altitude. The very low offset
temperature coefficient (TCO) of 1.5 Pa/K translates to a temperature drift of only 12.6 cm/K.
Please contact your regional Bosch Sensortec partner for more information about software
packages enhancing the calculation of the altitude given by the BMP280 pressure reading.
Table 1: Comparison between BMP180 and BMP280
Parameter
Footprint
Minimum VDD
Minimum VDDIO
Current consumption @3 Pa RMS noise
RMS Noise
Pressure resolution
Temperature resolution
Interfaces
Measurement modes
Measurement rate
Filter options
BMP180
BMP280
3.6 × 3.8 mm
2.0 × 2.5 mm
1.80 V
1.71 V
1.62 V
1.20 V
12 µA
2.7 µA
3 Pa
1.3 Pa
1 Pa
0.16 Pa
0.1°C
0.01°C
I²C
I²C & SPI (3 and 4 wire,
mode ‘00’ and ‘11’)
Only P or T, forced P&T, forced or periodic
up to 120 Hz
up to 157 Hz
None
Five bandwidths
BST-BMP280-DS001-11 | Revision 1.14 | May 2015
Bosch Sensortec
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to
third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Note: Specifications within this document are subject to change without notice. Not intended for publication.


3Pages


BMP280 電子部品, 半導体
Datasheet
BMP280 Digital Pressure Sensor
Page 6
9.2 PRODUCT USE .................................................................................................................. 47
9.3 APPLICATION EXAMPLES AND HINTS ................................................................................... 47
10. DOCUMENT HISTORY AND MODIFICATION .....................................................................48
BST-BMP280-DS001-11 | Revision 1.14 | May 2015
Bosch Sensortec
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to
third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Note: Specifications within this document are subject to change without notice. Not intended for publication.

6 Page



ページ 合計 : 30 ページ
 
PDF
ダウンロード
[ BMP280 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
BMP280

Digital Pressure Sensor

Bosch
Bosch


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap