DataSheet.jp

SSM6J410TU の電気的特性と機能

SSM6J410TUのメーカーはToshiba Semiconductorです、この部品の機能は「Field Effect Transistor」です。


製品の詳細 ( Datasheet PDF )

部品番号 SSM6J410TU
部品説明 Field Effect Transistor
メーカ Toshiba Semiconductor
ロゴ Toshiba Semiconductor ロゴ 




このページの下部にプレビューとSSM6J410TUダウンロード(pdfファイル)リンクがあります。
Total 6 pages

No Preview Available !

SSM6J410TU Datasheet, SSM6J410TU PDF,ピン配置, 機能
SSM6J410TU
TOSHIBA Field-Effect Transistor Silicon P-Channel MOS Type (U-MOS)
SSM6J410TU
Power Management Switch Applications
High-Speed Switching Applications
Unit: mm
4-V drive
Low ON-resistance
RDS(ON) = 393mΩ (max) (@VGS = –4 V)
RDS(ON) = 216mΩ (max) (@VGS = –10 V)
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Symbol
Rating
Unit
Drain-Source voltage
VDSS -30 V
Gate-Source voltage
Drain current
Power dissipation
DC
Pulse
VGSS
ID (Note1)
IDP(Note1)
PD(Note2)
t = 10s
± 20
-2.1
-4.2
500
1000
V
A
mW
1,2,5,6 : Drain
3 : Gate
4 : Source
Channel temperature
Storage temperature range
Tch 150 °C
Tstg
55 to 150
°C
JEDEC
Note: Using continuously under heavy loads (e.g. the application of high
JEITA
temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the
TOSHIBA
2-2T1D
reliability significantly even if the operating conditions (i.e.
operating temperature/current/voltage, etc.) are within the absolute
Weight: 7.0mg (typ.)
maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: The channel temperature should not exceed 150°C during use.
Note 2: Mounted on an FR4 board. (25.4 mm × 25.4 mm × 1.6 mm, Cu Pad: 645 mm2)
Marking
654
KPG
123
Equivalent Circuit (top view)
654
123
1
2010-01-19

1 Page





SSM6J410TU pdf, ピン配列
-3
Common Source
Ta = 25 °C
Pulse Test
ID – VDS
-10 V
-5.0 V
-2
-1
-4.0 V
-3.5 V
-3.3 V
-3.0 V
-2.8 V
VGS =- 2.5V
0
0 -0.2 -0.4 -0.6 -0.8 -1.0
Drain-source voltage VDS (V)
SSM6J410TU
-10 Common Source
VDS = -5 V
-1 Pulse Test
ID – VGS
-0.1
-0.01
-0.001
Ta = 100 °C
25 °C
25 °C
-0.0001
0
-1.0 -2.0 -3.0
Gate-source voltage VGS (V)
-4.0
1000
800
600
RDS (ON) – VGS
ID =−1.0A
Common Source
Pulse Test
400
200
0
0
25 °C
Ta = 100 °C
25 °C
-10 -20
Gate-source voltage VGS (V)
1000
800
RDS (ON) – ID
Common Source
Ta = 25°C
Pulse Test
600
400
200 -4.0 V
VGS = -10 V
0
0 -1
-2
Drain current ID (A)
-3
1000
800
RDS (ON) – Ta
Common Source
Pulse Test
600
400
-1.0 A / -10 V
ID = -0.5 A / VGS = -4.0 V
200
0
50 0 50 100 150
Ambient temperature Ta (°C)
Vth – Ta
-2.0
Common Source
VDS = -5.0 V
ID = -1 mA
-1.0
0
50 0 50 100 150
Ambient temperature Ta (°C)
3 2010-01-19


3Pages


SSM6J410TU 電子部品, 半導体
SSM6J410TU
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR
APPLICATIONS.
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
6 2010-01-19

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ SSM6J410TU データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
SSM6J410TU

Field Effect Transistor

Toshiba Semiconductor
Toshiba Semiconductor


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap