DataSheet.jp

FM0H104ZF の電気的特性と機能

FM0H104ZFのメーカーはKEMETです、この部品の機能は「Supercapacitors」です。


製品の詳細 ( Datasheet PDF )

部品番号 FM0H104ZF
部品説明 Supercapacitors
メーカ KEMET
ロゴ KEMET ロゴ 




このページの下部にプレビューとFM0H104ZFダウンロード(pdfファイル)リンクがあります。

Total 19 pages

No Preview Available !

FM0H104ZF Datasheet, FM0H104ZF PDF,ピン配置, 機能
Supercapacitors
FM Series
Overview
FM Series Supercapacitors, also known as Electric Double-
Layer Capacitors (EDLCs), are intended for high energy storage
applications.
Applications
Supercapacitors have characteristics ranging from traditional
capacitors and batteries. As a result, supercapacitors can be
used like a secondary battery when applied in a DC circuit.
These devices are best suited for use in low voltage DC hold-up
applications such as embedded microprocessor systems with
flash memory.
Benefits
• Rectangular case
• Wide range of temperature from -25°C to +70°C (all types
except FMR) and -40°C to +85°C (FMR type)
• Maintenance free
• 3.5 VDC, 5.5 VDC, and 6.5 VDC
• Highly reliable against liquid leakage
• Lead-free and RoHS Compliant
• Leads can be transverse mounted
Part Number System
FM
Series
FM
FME
FML
FMR
FMC
0H 223
Maximum
Operating Voltage
Capacitance Code (F)
0V = 3.5 VDC
0H = 5.5 VDC
0J = 6.5 VDC
First two digits
represent significant
figures. Third digit
specifies number of
zeros.
Z
Capacitance
Tolerance
Z = -20/+80%
F
Environmental
F = Lead-free
TP
Tape Type
TP = AMMO
-L1 = Transverse
mounting
Blank = Bulk
16
Height
(excluding lead)
16 = 16 mm
18 = 18 mm
Blank = Bulk
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
One world. One KEMET
S6012_FM • 3/7/2014 1

1 Page





FM0H104ZF pdf, ピン配列
Supercapacitors – FM Series
Performance Characteristics
Supercapacitors should not be used for applications such as ripple absorption because of their high internal resistance (several
hundred mΩ to a hundred Ω) compared to aluminum electrolytic capacitors. Thus, its main use would be similar to that of secondary
battery such as power back-up in DC circuit. The following list shows the characteristics of supercapacitors as compared to aluminum
electrolytic capacitors for power back-up and secondary batteries.
Secondary Battery
Capacitor
NiCd
Lithium Ion
Aluminum Electrolytic
Supercapacitor
Back-up ability
Eco-hazard
Cd
Operating Temperature Range
-20 to +60ºC
-20 to +50ºC
-55 to +105ºC
-40 to +85ºC (FR, FT)
Charge Time
Charge/Discharge Life Time
Restrictions on Charge/Discharge
few hours
approximately 500 times
yes
few hours
approximately 500 to 1,000
times
yes
few seconds
limitless (*1)
none
few seconds
limitless (*1)
none
Flow Soldering
not applicable
not applicable
applicable
applicable
Automatic Mounting
not applicable
not applicable
applicable
applicable
(FM and FC series)
Safety Risks
leakage, explosion
leakage, combustion,
explosion, ignition
heat-up, explosion
gas emission (*2)
(*1) Aluminum electrolytic capacitors and supercapacitors have limited lifetime. However, when used under proper conditions, both can operate within a
predetermined lifetime.
(*2) There is no harm as it is a mere leak of water vapor which transitioned from water contained in the electrolyte (diluted sulfuric acid). However, application of
abnormal voltage surge exceeding maximum operating voltage may result in leakage and explosion.
Typical Applications
Intended Use (Guideline)
Long time back-up
Power Supply (Guideline) Application
500 μA and below
CMOS microcomputer, IC
for clocks
Examples of Equipment
CMOS microcomputer,
static RAM/DTS
(digital tuning system)
Series
FM series
Environmental Compliance
All KEMET supercapacitors are RoHS Compliant.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
S6012_FM • 3/7/2014 3


3Pages


FM0H104ZF 電子部品, 半導体
Supercapacitors – FM Series
Specifications – All Types Except FMR cont’d
Item
Temperature
Cycle
High
Temperature
and High
Humidity
Resistance
Capacitance
ESR
Current (30
minutes value)
Appearance
Capacitance
ESR
Current (30
minutes value)
Appearance
Capacitance
FM 5.5 V Type, 3.5 V Type,
6.5 V Type, FMC Type
Satisfy initial ratings
No obvious abnormality
Within ±20% of initial value
≤ 120% of initial ratings
≤ 120% of initial ratings
No obvious abnormality
Within ±30% of initial value
High
Temperature
Load
ESR
Current (30
minutes value)
Appearance
< 200% of initial ratings
< 200% of initial ratings
No obvious abnormality
FML Type, FME Type
Satisfy initial ratings
No obvious abnormality
Within ±20% of initial value
≤ 120% of initial ratings
≤ 120% of initial ratings
No obvious abnormality
Within ±30% of initial value
< 200% of initial ratings
< 200% of initial ratings
No obvious abnormality
Self Discharge Characteristics
(Voltage Holding Characteristics)
5.5 V type: Voltage between terminal
leads > 4.2 V
3.5 V type: Not specified
6.5 V type: Not specified
Test Conditions
(conforming to JIS C 5160-1)
Conforms to 4.12
Temperature
Condition:
Number of cycles:
-25ºC→ Room
temperature→ +70ºC
Room temperature
5 cycles
Conforms to 4.14
Temperature:
Relative humidity:
Testing time:
+40 ±2ºC
90 to 95% RH
240 ±8 hours
Conforms to 4.15
Temperature:
Voltage applied:
Series protection
resistance:
Testing time:
+70 ±2ºC
Maximum operating
voltage
1,000 +48 (+48/-0) hours
Charging condition
Voltage applied:
Series resistance:
Charging time:
5.0 VDC (Terminal at
the case side must be
negative)
24 hours
Storage
Let stand for 24 hours in condition described
below with terminals opened.
Ambient temperature: < 25ºC
Relative humidity: < 70% RH
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
S6012_FM • 3/7/2014 6

6 Page



ページ 合計 : 19 ページ
 
PDF
ダウンロード
[ FM0H104ZF データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
FM0H104ZF

Supercapacitors

KEMET
KEMET


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap