|
|
PDF CXA1830 Data sheet ( Hoja de datos )
| Número de pieza | CXA1830 | |
| Descripción | LED | |
| Fabricantes | Cree | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CXA1830 (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
|
No Preview Available !
Product family data sheet
Cree® XLamp® CXA1830 LED
Product Description
The XLamp CXA1830 LED array
expands Cree’s family of high‑flux,
multi‑die arrays in a smaller,
easy‑to‑use platform. With XLamp
lighting‑class reliability, the
CXA1830’s small, uniform emitting
surface enables both directional
and non‑directional lighting
applications including lamp retrofit
and luminaire designs. Available in
2‑step and 4‑step color consistency,
and featuring a 14-mm optical
source, the CXA1830 brings new
levels of flux and efficacy to this
form factor.
features
• Available in 4-step and 2-step
EasyWhite® bins at 2700 K,
3000 K, 3500 K, 4000 K and
5000 K CCT
• Available in ANSI white bins at
4000 K and 5000 K CCT
• Available in 70-, 80- and
93‑minimum CRI options
• Forward voltage: 37 V
• 85 °C binning and
characterization
• Maximum drive current:
1400 mA
• 115° viewing angle, uniform
chromaticity profile
• Top-side solder connections
• Thermocouple attach point
• NEMA SSL-3 2011 standard flux
bins
Table of Contents
Characteristics............................... 2
Operating Limits............................. 2
Flux Characteristics, EasyWhite
Order Codes and Bins..................... 3
Flux Characteristics, ANSI White
Order Codes and Bins..................... 4
Relative Spectral Power Distribution.. 5
Electrical Characteristics.................. 5
Relative Luminous Flux.................... 6
Typical Spatial Distribution............... 7
Performance Groups - Brightness...... 7
Performance Groups - Chromaticity... 8
Cree EasyWhite Bins Plotted on the
1931 CIE Color Space..................... 9
Cree ANSI White Bins Plotted on
the 1931 CIE Color Space...............10
Bin and Order Code Formats...........11
Mechanical Dimensions..................11
Thermal Design.............................12
Notes...........................................13
Packaging.....................................14
Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree
logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
1 page  
Relative Spectral Power Distribution
XLamp CXA1830 LED
Relative Spectral Power Distribution (If = 800 ma, Tj = 85 °C)
The following graph is the result of a series of pulsed measurements at 800 mA and TJ = 85 °C.
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
380 430 480 530 580 630 680 730 780
Wavelength (nm)
5000K, 70 CRI
4000K, 70 CRI
3000K, 80 CRI
3000K, 93 CRI
Electrical Characteristics
The following graph is the result of a series of steady-state measurements.
41
40
39
38
37
36
35
34
400
600
800
1000
1200
Current (mA)
Tc = 25 °C
Tc = 55 °C
Tc = 85 °C
Tc = 105 °C
1400
Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered
trademarks of Cree, Inc.
5
5 Page 
XLamp CXA1830 LED
Bin and Order Code Formats
Bin codes and order codes are configured as follows:
Order Code Bin Code
Series = CXA18
Series = CXA18
Internal code
CRI Specification
0 = Standard CRI
H = 80 min CRI
Y = 93 min CRI
6
SSSSSCC-HHHH-HHHGGNNNNNN NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED WITHIN ARE THE PROPRIETARY AND
Kit codeCONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT
OF CREE INC.
THE WRITTEN CONSENT
Vf class: N0 = 37-V class
D Performance class
Chromaticity bin
Vf class: N0 = 37-V class
Internal code
5 SSSSSCC-WWW-FF-GG4R-AAAAA
3
CRI Specification
B = 70 min CRI
H = 80 min CRI
Y = 93 min CRI
Flux bin
Performance class
REV
Mechanical Dimensions
Dimensions are in mm.
Tolerances unless otherwise
specified:
.x + .10
C
.xx + .03
.xxx + .010
x° + 1°
.70
2.60
R .500
.70
2.60
17.85
±0.2
17.85
±0.2
6.37
1.15 ± .15
Tc
1.30
6.92
14.0
B ±0.02
16.0
±0.2
R .500
.70
2.60
2.60 .70
0.55 ± 0.1
TOLERANCE
DIMENSION
.X ±
.XX ±
.XXX ±
X° ±
A
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
.XX ± .25
.XXX ± .125
THIRD ANGLE PROJECTION
X° ± .5 °
FOR SHEET METAL PARTS ONLY
Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered .X ± 1.5
trademarks of Cree, Inc.
.XX ± .75
.XXX ± .25
X° ± .5 °
11SURFACE FINISH:
1.6
6543
11 Page | ||
| Páginas | Total 14 Páginas | |
| PDF Descargar | [ Datasheet CXA1830.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CXA1830 | LED | Cree |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |