|
|
Número de pieza | IXP220 | |
Descripción | Software QUICK START GUIDE | |
Fabricantes | Impro | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de IXP220 (archivo pdf) en la parte inferior de esta página. Total 48 Páginas | ||
No Preview Available ! IXP220 Software
QUICK START GUIDE
Scope of Document
This document gives a brief overview of the IXP220 System.
Document Conventions
We use the following conventions in this document:
Note – points out extra information
Tip – points out alternative methods to perform a task
Important – points out important information
Warning – points out potential danger to you or the
product
Before You Begin
Have the following available:
An active Ethernet connection (using a standard Ethernet Cable) to
the IXP220 Controller and IP Terminals.
The IXP220 Software Suite.
The MAC Address and Fixed Address of each IXP220 Controller –
on a label bundled with the Controller.
1 page Figure 2 – Firebird Select Additional Tasks
10. On the Select Additional Tasks screen:
Select the Use the Guardian to Control the Server? option.
Select the Run as a Service? option.
Select the Start Firebird Automatically Everytime You Boot
Up? option.
Select the ―Install Control Panel Applet?‖ option.
Select the Copy Firebird Client Library to <System>
Directory? option.
Select the Generate Client Library as GDS32.DLL for Legacy
app. Support? option.
11. Click the Next button.
12. Click the Install button.
13. Review the Information dialog and then click the Next button.
14. Click the Finish button.
ISW302-0-0-GB-03
August 2010
Page 5
5 Page 3. In the Select the Group Name dialog, double-click on your chosen
group name row.
4. Logon if requested (see page 9). A password is required for each
Controller and Terminal being added to the Group.
5. Click the button.
Communication Configuration – Case Local
Configure the Controller or Terminal’s Static IP Address (Ethernet)
Figure 3 – Case Local—Configure the Controller or Terminal’s Static IP Address
(Ethernet)
If a DHCP server is present, IP Addresses are dynamically
assigned initially. Obtain a suitable IP Address from your
Network Administrator. A private static IP Address is essential
for the Controller or Terminal because a DHCP Server may
assign a new IP Address resulting in the Software losing
communications.
If the Controller or Terminal is NOT on the DHCP Server,
ensure the PC is on the same IP Range as that of the
Controller or Terminal. If the PC’s IP Range differs, you
cannot change the Controller or Terminal’s settings.
ISW302-0-0-GB-03
August 2010
Page 11
11 Page |
Páginas | Total 48 Páginas | |
PDF Descargar | [ Datasheet IXP220.PDF ] |
Número de pieza | Descripción | Fabricantes |
IXP220 | CONTROLLER INSTALLATION MANUAL | Impro |
IXP220 | Software QUICK START GUIDE | Impro |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |