DataSheet.jp

HCS04HMSR の電気的特性と機能

HCS04HMSRのメーカーはIntersil Corporationです、この部品の機能は「Radiation Hardened Hex Inverter」です。


製品の詳細 ( Datasheet PDF )

部品番号 HCS04HMSR
部品説明 Radiation Hardened Hex Inverter
メーカ Intersil Corporation
ロゴ Intersil Corporation ロゴ 




このページの下部にプレビューとHCS04HMSRダウンロード(pdfファイル)リンクがあります。
Total 8 pages

No Preview Available !

HCS04HMSR Datasheet, HCS04HMSR PDF,ピン配置, 機能
HCS04MS
August 1995
Radiation Hardened
Hex Inverter
Features
Pinouts
• 3 Micron Radiation Hardened SOS CMOS
• Total Dose 200K RAD (Si)
• SEP Effective LET No Upsets: >100 MEV-cm2/mg
• Single Event Upset (SEU) Immunity < 2 x 10-9 Errors/Bit-Day
(Typ)
• Dose Rate Survivability: >1 x 1012 RAD (Si)/s
• Dose Rate Upset >1010 RAD (Si)/s 20ns Pulse
• Cosmic Ray Upset Immunity < 2 x 10-9 Errors/Gate Day
(Typ)
• Latch-Up Free Under Any Conditions
• Military Temperature Range: -55oC to +125oC
• Significant Power Reduction Compared to LSTTL ICs
• DC Operating Voltage Range: 4.5V to 5.5V
• Input Logic Levels
- VIL = 30% of VCC Max
- VIH = 70% of VCC Min
• Input Current Levels Ii 5µA at VOL, VOH
Description
The Intersil HCS04MS is a Radiation Hardened Hex Inverter. A
logic level on any input forces the output to the opposite logic
state.
The HCS04MS utilizes advanced CMOS/SOS technology to
achieve high-speed operation. This device is a member of
radiation hardened, high-speed, CMOS/SOS Logic Family.
The HCS04MS is supplied in a 14 lead Ceramic flatpack (K suffix)
or a SBDIP Package (D suffix).
A1
Y1
A2
Y2
A3
Y3
GND
14 LEAD CERAMIC DUAL-IN-LINE
METAL SEAL PACKAGE (SBDIP)
MIL-STD-1835 CDIP2-T14
TOP VIEW
A1 1
Y1 2
A2 3
Y2 4
A3 5
Y3 6
GND 7
14 VCC
13 A6
12 Y6
11 A5
10 Y5
9 A4
8 Y4
14 LEAD CERAMIC METAL SEAL
FLATPACK PACKAGE (FLATPACK)
MIL-STD-1835 CDFP3-F14
TOP VIEW
1 14
2 13
3 12
4 11
5 10
69
78
TRUTH TABLE
INPUTS
OUTPUTS
VCC
A6
Y6
A5
Y5
A4
Y4
Ordering Information
PART
NUMBER
TEMPERATURE SCREENING
RANGE
LEVEL
PACKAGE
HCS04DMSR -55oC to +125oC Intersil Class 14 Lead SBDIP
S Equivalent
HCS04KMSR -55oC to +125oC Intersil Class 14 Lead Ceramic
S Equivalent Flatpack
HCS04D/
Sample
+25oC
Sample
14 Lead SBDIP
HCS04K/
Sample
+25oC
Sample
14 Lead Ceramic
Flatpack
HCS04HMSR
+25oC
Die
Die
An Yn
LH
HL
NOTE: L = Logic Level Low,
H = Logic level High
Functional Diagram
An
(1, 3, 5, 9, 11, 13)
Yn
(2, 4, 6, 8, 10, 12)
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
25
Spec Number 518745
File Number 3046.1

1 Page





HCS04HMSR pdf, ピン配列
Specifications HCS04MS
TABLE 2. AC ELECTRICAL PERFORMANCE CHARACTERISTICS
PARAMETER
Input to Yn
Input to Yn
SYMBOL
(NOTES 1, 2)
CONDITIONS
TPHL VCC = 4.5V
VCC = 4.5V
TPLH VCC = 4.5V
VCC = 4.5V
GROUP
A SUB-
GROUPS
9
10, 11
9
10, 11
TEMPERATURE
+25oC
+125oC, -55oC
+25oC
+125oC, -55oC
NOTES:
1. All voltages referenced to device GND.
2. AC measurements assume RL = 500, CL = 50pF, Input TR = RF = 3ns, VIL = GND, VIH = VCC.
LIMITS
MIN MAX UNITS
2 18 ns
2 20 ns
2 20 ns
2 22 ns
TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS
LIMITS
PARAMETER
Capacitance Power
Dissipation
SYMBOL
CONDITIONS
CPD
VCC = 5.0V, f = 1MHz
Input Capacitance
CIN VCC = 5.0V, f = 1MHz
Output Transition
Time
TTHL
TTLH
VCC = 4.5V
NOTES
1
1
1
1
1
1
TEMPERATURE
+25oC
+125oC, -55oC
+25oC
+125oC
+25oC
+125oC
MIN MAX UNITS
- 21 pF
- 27 pF
- 10 pF
- 10 pF
- 15 ns
- 22 ns
NOTE:
1. The parameters listed in Table 3 are controlled via design or process parameters. Min and Max Limits are guaranteed but not directly
tested. These parameters are characterized upon initial design release and upon design changes which affect these characteristics.
TABLE 4. DC POST RADIATION ELECTRICAL PERFORMANCE CHARACTERISTICS
PARAMETER
Quiescent Current
Output Current (Sink)
Output Current
(Source)
Output Voltage Low
Output Voltage High
Input Leakage Current
SYMBOL
(NOTES 1, 2)
CONDITIONS
ICC VCC = 5.5V, VIN = VCC or GND
IOL VCC = 4.5V, VIN = VCC or GND,
VOUT = 0.4V
IOH VCC = 4.5V, VIN = VCC or GND,
VOUT = VCC -0.4V
VOL
VCC = 4.5V and 5.5V, VIH = 0.70(VCC),
VIL = 0.30(VCC), IOL = 50µA
VOH
VCC = 4.5V and 5.5V, VIH = 0.70(VCC),
VIL = 0.30(VCC), IOH = -50µA
IIN VCC = 5.5V, VIN = VCC or GND
TEMPERATURE
+25oC
+25oC
200K RAD
LIMITS
MIN MAX UNITS
- 0.2 mA
4.0 - mA
+25oC
-4.0 - mA
+25oC
- 0.1 V
+25oC
+25oC
VCC
-0.1
-
-
±5
V
µA
Spec Number 518745
27


3Pages


HCS04HMSR 電子部品, 半導体
HCS04MS
Intersil Space Level Product Flow - ‘MS’
Wafer Lot Acceptance (All Lots) Method 5007
(Includes SEM)
GAMMA Radiation Verification (Each Wafer) Method 1019,
4 Samples/Wafer, 0 Rejects
100% Nondestructive Bond Pull, Method 2023
Sample - Wire Bond Pull Monitor, Method 2011
Sample - Die Shear Monitor, Method 2019 or 2027
100% Internal Visual Inspection, Method 2010, Condition A
100% Temperature Cycle, Method 1010, Condition C,
10 Cycles
100% Constant Acceleration, Method 2001, Condition per
Method 5004
100% PIND, Method 2020, Condition A
100% External Visual
100% Serialization
100% Initial Electrical Test (T0)
100% Static Burn-In 1, Condition A or B, 24 hrs. min.,
+125oC min., Method 1015
100% Interim Electrical Test 1 (T1)
100% Delta Calculation (T0-T1)
100% Static Burn-In 2, Condition A or B, 24 hrs. min.,
+125oC min., Method 1015
100% Interim Electrical Test 2 (T2)
100% Delta Calculation (T0-T2)
100% PDA 1, Method 5004 (Notes 1and 2)
100% Dynamic Burn-In, Condition D, 240 hrs., +125oC or
Equivalent, Method 1015
100% Interim Electrical Test 3 (T3)
100% Delta Calculation (T0-T3)
100% PDA 2, Method 5004 (Note 2)
100% Final Electrical Test
100% Fine/Gross Leak, Method 1014
100% Radiographic, Method 2012 (Note 3)
100% External Visual, Method 2009
Sample - Group A, Method 5005 (Note 4)
100% Data Package Generation (Note 5)
NOTES:
1. Failures from Interim electrical test 1 and 2 are combined for determining PDA 1.
2. Failures from subgroup 1, 7, 9 and deltas are used for calculating PDA. The maximum allowable PDA = 5% with no more than 3% of the
failures from subgroup 7.
3. Radiographic (X-Ray) inspection may be performed at any point after serialization as allowed by Method 5004.
4. Alternate Group A testing may be performed as allowed by MIL-STD-883, Method 5005.
5. Data Package Contents:
• Cover Sheet (Intersil Name and/or Logo, P.O. Number, Customer Part Number, Lot Date Code, Intersil Part Number, Lot Number,
Quantity).
• Wafer Lot Acceptance Report (Method 5007). Includes reproductions of SEM photos with percent of step coverage.
• GAMMA Radiation Report. Contains Cover page, disposition, Rad Dose, Lot Number, Test Package used, Specification Numbers, Test
equipment, etc. Radiation Read and Record data on file at Intersil.
• X-Ray report and film. Includes penetrometer measurements.
• Screening, Electrical, and Group A attributes (Screening attributes begin after package seal).
• Lot Serial Number Sheet (Good units serial number and lot number).
• Variables Data (All Delta operations). Data is identified by serial number. Data header includes lot number and date of test.
• The Certificate of Conformance is a part of the shipping invoice and is not part of the Data Book. The Certificate of Conformance is signed
by an authorized Quality Representative.
Spec Number 518745
30

6 Page



ページ 合計 : 8 ページ
 
PDF
ダウンロード
[ HCS04HMSR データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
HCS04HMSR

Radiation Hardened Hex Inverter

Intersil Corporation
Intersil Corporation


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap