|
|
PDF OPB812 Data sheet ( Hoja de datos )
| Número de pieza | OPB812 | |
| Descripción | Wide Gap Slotted Optical Switch | |
| Fabricantes | OPTEK | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de OPB812 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
Wide Gap Slotted Optical Switch
OPB800 & OPB810 (L and W Series)
Features:
• 0.375” (9.525 mm) wide gap
• Choice of aperture size
• Choice of minimum photocurrent
• Choice of opaque or IR transmissive shells
• Available for PCBoard mounting or with 24” 26 AWG wires
W Package
Product Photo Here
L Package
Description:
The OPB800L series, PCBoard mounting, of wide gap switch provides the flexibility of a custom device from a
standard product line, while the OPB800W series, remote mounted, switch offers 24” (610 mm) 26 AWG wire
interconnect.
Building from a standard housing that utilizes a 0.375” (9.5 mm) wide slot, a user can specify the electrical output
parameters, discrete shell material and the aperture width.
Housings are made from an opaque grade of injection-molded plastic that minimizes the assembly’s sensitivity to
visible and near-infrared ambient radiation. Discrete shells, which are exposed on parallel faces inside the device
throat, are made of IR transmissive plastic (for applications where aperture contamination may occur) or of opaque
plastic with aperture openings (for maximum protection against ambient light).
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
• Non-contact interruptive object sensing
• Assembly line automation
• Machine automation
• Equipment security
• Machine safety
Optek Assembly
Phototransistor Output Family
Part Number Guide
OPB 8 X X X X X Z
For “W” series only
Sensor Aperture:
1 — 0.010” (.254 mm)
5 — 0.050” (1.270 mm)
Emitter Aperture:
5 — 0.050” (1.270 mm)
Discrete Shell Material:
0 — Transmissive plastic
Discrete shell
1 — Opaque plastic
Discrete shell
Electrical Specification Variations:
0 = Electrical Parameter A
1 = Electrical Parameter B
2 = Electrical Parameter C
Note: Assemblies with 0.010” apertures are
currently available with electrical
parameter “A” only.
Wires = 26AWG—24” Long
Mounting configurations:
L — Solder lead termination
W — Wire termination
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue B 02/2013
Page 1 of 5
1 page  
Wide Gap Slotted Optical Switch
OPB800 & OPB810 (L and W Series)
OPB800_55 - Flag Next to Emitter
1.2
Top to
1.0
0.8
Left to Right
0.6
Right to Left
0.4
Right to Left
Left to Right
Top to Bottom
0.2
0.0
0.00
0.05 0.10 0.15 0.20
Distance (inches)
0.25
OPB800_55 - Flag in Middle of Slot
1.2
Top to
1.0
0.8
Left to Right
0.6
Right to Left
0.4
Right to Left
Left to Right
Top to Bottom
0.2
0.0
0.00
0.05
0.10
0.15
0.20
Distance (inches)
0.25
OPB800_55 - Flag Next to Sensor
1.2
Top to
1.0
0.8
Left to Right
0.6
Right to Left
0.4
Right to Left
Left to Right
Top to Bottom
0.2
0.0
0.00 0.05 0.10 0.15 0.20 0.25
Distance (inches)
Top to Bottom
0
Left to Right
Emitter
Right to Left
Sensor
0 Width
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue B 02/2013
Page 5 of 5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet OPB812.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| OPB810 | Wide Gap Slotted Optical Switch | OPTEK |
| OPB810L | WIDE GAP SLOTTED OPTICAL SWITCHES | OPTEK |
| OPB810W | WIDE GAP SLOTTED OPTICAL SWITCHES | OPTEK |
| OPB811 | Wide Gap Slotted Optical Switch | OPTEK |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |