|
|
PDF PS9214 Data sheet ( Hoja de datos )
| Número de pieza | PS9214 | |
| Descripción | HIGH CMR 10Mbps OPEN COLLECTOR OUTPUT TYPE 5-PIN SOP PHOTOCOUPLER | |
| Fabricantes | California Eastern Labs | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PS9214 (archivo pdf) en la parte inferior de esta página. Total 15 Páginas | ||
|
No Preview Available !
PHOTOCOUPLER
PS9214
HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE
5-PIN SOP PHOTOCOUPLER
NEPOC Series
FOR CREEPAGE DISTANCE OF 5.5 mm
DESCRIPTION
The PS9214 is an optically coupled high-speed, isolator containing a GaAlAs LED on the input side and a
photodiode and a signal processing circuit on the output side on one chip.
The PS9214 is designed specifically for high common mode transient immunity (CMR) and low pulse width
distortion with operating temperature.
FEATURES
• Long creepage distance (5.5 mm MIN.)
• High common mode transient immunity (CMH, CML = 20 kV/ s TYP.)
• Pulse width distortion ( tPHL tPLH = 3 ns TYP.)
• High-speed (10 Mbps)
• High isolation voltage (BV = 2 500 Vr.m.s.)
• Open collector output
• Ordering number of taping product: PS9214-F3, F4: 2 500 pcs/reel
• Pb-Free product
• Safety standards
• UL approved: File No. E72422
• DIN EN60747-5-2 (VDE0884 Part2) approved No.40008347 (Option)
TRUTH TABLE
APPLICATIONS
• Measurement equipment
• PDP
• FA Network
LED Output
ON L
OFF H
Document No. PN10536EJ04V0DS (4th edition)
Date Published August 2008 NS
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
1 page  
PS9214
ELECTRICAL CHARACTERISTICS (TA = 40 to +85°C, unless otherwise specified)
Parameter
Diode Forward Voltage
Reverse Current
Terminal Capacitance
Detector High Level Output Current
Low Level Output Voltage*2
High Level Supply Current
Low Level Supply Current
Coupled Threshold Input Current
(H L)
Isolation Resistance
Isolation Capacitance
Propagation Delay Time
(H L)*3
Propagation Delay Time
(L H)*3
Rise Time
Fall Time
Pulse Width Distortion
(PWD)*3
Propagation Delay Skew
Common Mode
Transient Immunity at High
Level Output*4
Common Mode
Transient Immunity at Low
Level Output*4
Symbol
Conditions
VF IF = 10 mA, TA = 25 C
IR VR = 3 V, TA = 25 C
Ct VF = 0 V, f = 1 MHz, TA = 25 C
IOH VCC = VO = 5.5 V, VF = 0.8 V
VOL VCC = 5.5 V, IF = 5 mA, IOL = 13 mA
ICCH VCC = 5.5 V, IF = 0 mA, VO = open
ICCL VCC = 5.5 V, IF = 10 mA, VO = open
IFHL VCC = 5 V, VO = 0.8 V, RL = 350
RI-O
CI-O
tPHL
tPLH
tr
tf
tPHL tPLH
VI-O = 1 kVDC, RH = 40 to 60%,
TA = 25 C
VI-O = 0 V, f = 1 MHz, TA = 25 C
TA = 25 C
VCC = 5 V, RL = 350 , IF = 7.5 mA
TA = 25 C
VCC = 5 V, RL = 350 , IF = 7.5 mA
VCC = 5 V, RL = 350 , IF = 7.5 mA
VCC = 5 V, RL = 350 , IF = 7.5 mA
VCC = 5 V, RL = 350 , IF = 7.5 mA
tPSK
CMH
VCC = 5 V, RL = 350 , IF = 7.5 mA
RL = 350 , TA = 25 C, IF = 0 mA,
VO (MIN.) = 2 V, VCM = 1 kV
CML
RL = 350 , TA = 25 C, IF = 7.5 mA,
VO (MAX.) = 0.8 V, VCM = 1 kV
MIN.
1.4
TYP.*1
1.65
30
0.02
0.15
3
7
2
MAX.
1.9
10
250
0.6
8
11
5
1011
0.6
54 75
100
51 75
100
20
10
3 50
60
10 20
10 20
Unit
V
A
pF
A
V
mA
mA
mA
pF
ns
ns
ns
kV/ s
kV/ s
Data Sheet PN10536EJ04V0DS
5
5 Page 
PS9214
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature
• Time of peak reflow temperature
• Time of temperature higher than 220 C
• Time to preheat temperature from 120 to 180 C
• Number of reflows
• Flux
260 C or below (package surface temperature)
10 seconds or less
60 seconds or less
120 30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(2) Wave soldering
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
260 C or below (molten solder temperature)
10 seconds or less
120 C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by Soldering Iron
• Peak Temperature (lead part temperature)
• Time (each pins)
• Flux
350 C or below
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
(b) Please be sure that the temperature of the package would not be heated over 100 C
Data Sheet PN10536EJ04V0DS
11
11 Page | ||
| Páginas | Total 15 Páginas | |
| PDF Descargar | [ Datasheet PS9214.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PS9213 | 1Mbps OPEN COLLECTOR OUTPUT HIGH CMR INTELLIGENT POWER MODULE 5-PIN SOP PHOTOCOUPLER | California Eastern Labs |
| PS9213 | 5-PIN SOP PHOTOCOUPLER |  Renesas |
| PS9214 | HIGH CMR 10Mbps OPEN COLLECTOR OUTPUT TYPE 5-PIN SOP PHOTOCOUPLER | California Eastern Labs |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |